I am trying to recreate a tilt shift effect on a photo but I cannot use a gradient except once and then it cancels out the first when I try to add a second blur in an opposite corner. How do I add multiple gradient to the same image?
View 2 RepliesI am having a little trouble trying to add multiple fade to transparent gradients appear in a single image. Here are the steps I have done so far:
Create a new vector with the photo unlocked
Add a layer mask
use the black to white gradient, so the edge of the photo is completely translarent and as you move to the center, it slowly reveals the photo.
I used this technique I found online for one edge of the photo and it worked great, untill I tried the second gradient on the same photo, and the first one I did disappeared. I guess Photoshop only lets you have one.
The next thing I tried is to create another vector mask and create another gradient, but it did not work at all. Also, Photoshop only lets you have two vector masks per layer, so That wont do me much good if I need 4 gradients, each one fading to transparent around the 4 edges of the photo.
Any solution would be greatly appreciated. I plan to take the photo that has the fade to transparent gradients and copy it to another background image with some text.
Thanks a lot in advance,
Jake
I can only use the gradient tool in one instance. After that, the first instance is removed and replaced with the new instance. How can I apply multiple instances of the gradient tool on the same image?
View 1 Replies View RelatedI have an image I am trying to create that I want to fade from right to left. In other words, I want the right side of the image to be full clarity, color, etc., and have it generally fade to almost gone by the time it gets to the left edge. Think of it as a gradient for an image.
Any way to do that with Gimp?
I found a blur tool. If I cannot do this with some kind of gradient tool, is there a "fade" tool?
I am unable to add a gradient to an image. I do the following:
-Select a gradient (I just selected a default gradient to start off with)
-Then I select a region of the image that I want to apply the gradient to (I use the rectangle select tool)
-Then I switch back to the gradient tool
-Then I hover the cursor over the selected region of the image. This is where I expect to be able to click the mouse down and drag to create the gradient. However, when the cursor hovers over the image the cursor turns into a black circle with a line through it (which obviously is telling me "no, you can't do this"). Obviously, when I click and drag, nothing happens.
I am having trouble making a gradient image. I know the two colors I need, but the gradient isn't working for me.
View 4 Replies View RelatedI'm designing a banner for my gaming guild's forums. I have draw the logo/banner and textured it. After Desaturating the image im left with a nice B&W image.
I know of many ways to color the image but everytime that I do the color doesn't match the other colors we have on the forums.
What I want to do is color the image according to a color gradient that we use on the forums.
I would like to have the whitest pixels of the banner be the lightest color from the gradient(#c0a864) and the darkest pixels of the banner be the darkest color from the gradient(#917341). And have GIMP interpolate between those two colors for the other pixels in between the lighest/darkest.
Similar to how a Bumpmap works, only instead of simulating depth based on the range of colors from Black to White, I want it to colorize the banner.
I have a b&w image (greyscale) that i want to colorize based on the greyscale. Some thing the provides a thermal or in this case a colorized pressure map. I
In this case it is a like a stamp. Replacing the blacks with red and down toward blue as on the grey scale.
I have a photo and I would like to blur the bottom of the image while leaving the top of the image sharp, similar to limiting the depth of field by using a large f-stop. I created a gradient mask and then used Filters > Blur but it is not working. If I choose the layer that I created the mask on and choose blur, nothing happens. If I choose the layer (background) under the mask then the whole image blurs.
View 3 Replies View RelatedI was trying to teach myself to use gradients the other day... And now when I start a new project and try to paste in a photo as a new layer, it pastes as the gradient instead.
I have opened up both the gradients dialog and the gradients editor but cannot turn it off. In fact, when I open a brand new (empty) file, I can see the gradient attached to my pointer (mouse).
I successfully finished my first gradient mesh… Now, I tried to create another gradient mesh… As a sublayer under a parent layer called left eye… The left pupil was a sublayer also…
Illustrator through a fit when I try to do this… It went ahead and let me create the sublayer and gradient mesh, but… It wouldn't let me color the second sublayer/gradient mesh…
The newly created sublayer/gradient mesh had the same color as the first sublayer (the same color being the small horizontal tower that colors your different layers).
Maybe I'm just missing a step somewhere, to be able to have multiple sublayer with multiple gradient meshes?
I'm fairly new to illustrator and graphic designer, but… I'm starting to pick up on the features pretty quickly.
I have been trying out gimp and i'm getting the hang of the basics but what i would like to know is how can i scroll multiple layers on the same image,
i have been using the 'move path' function and i can get one layer to scroll but how do i add more layers to the image? i want one text layer to scroll horizontally and then another different text layer to scroll vertically but at the moment i only get one or the other.
I have a not-moving .jpeg image and I want to put 5 different animated .gif images on top of that .jpeg image background but I don't want those 5 .gif images to stop moving.
This is what I'm talking about:
I want to learn how to make .gif images like these using GIMP 2.8.6. I have searched for tutorials for this but they are only for putting a single gif on top of a still image, not multiple gifs on top of a still image.
I'm a new user of GIMP. I have scanned a line plan that I need to modify in a series of multiple scans (plan is too large to scan in one image) and I need to recombine the multiple files back into one seamless image.
How does one accomplish this?
I have a not-moving .jpeg image and I want to put 5 different animated .gif images on top of that .jpeg image background but I don't want those 5 .gif images to stop moving.
how to make .gif images like these using GIMP 2.8.6
When I cut, and copy an image to the clipboard and then paste the image into a new, blank page, it pastes the image multiple times (about 20) on the one page. How can I revert to it pasting just one image?
View 1 Replies View RelatedIs there a way to use multiple gradient masks in a single mask?
I'm working on a photo collage and when I bring in a new picture I would like to get rid of the hard edges. Creating a layer mask and then using the gradient tool to fade one of the edges of the picture works great. Is there a way to repeat this on the same mask so that I can use this same technique on the other 3 edges of the picture?
Here is the image I am working on:
I need to know how to make it look like this:
There are two things going on in the origina: the S-shaped semi-transparent overlay, and a linear gradient that lightens on the top and bottom and darkens in the middle. Also, note the transparent space between the "outline shape" and the inner circles.
So - two things. 1) How do I apply a gradient to the entire shape, and 2) put the all-white overlay on top (overlay should be confined to the shape as well).
I want to apply a gradient to multiple lines of text so that the gradient flows throughout all of the text and not just line by line.
View 5 Replies View Relatedwhat I'd like to do is to select the edge of a picture, and then extend the colors that are present in gradient fashion, based on the colors of the pixels at the edge.
For instance, here's a picture of the grand canyon:
How would I extend the left side with gradients that would match the colors of the pixels on the left edge, and all gradiate to black? (I'd blur or something later so that the transition from the picture to the gradient start appeared smoother)
I need to apply a single gradient acros a number of live paint objects but am finding it annoyingly hard to find a way. I know that normally, to apply a gradient across multiple objects, you would need to make them all into one compound path but does this apply to live paint groups in any way?? Can what i need to achieve actually be done?
View 3 Replies View RelatedI am a new user to Gimp and have gone out and watched many videos regarding how to use the different tools. I have recently been toying with the gradient tool on some text. Everything worked perfectly at first, but recently it seems to not be responding. Here are the steps that I take:
Open a new file with transparent background
Create a text box
Type in the text and adjust the font size and style
Go under layer, transparency, and select alpha to selection
Select gradient, select colors, select Dark Only mode
Drag my line from left to right across the text
When I used this exact technique last week it worked just fine, now, it either does nothing at all or will only respond only if I change mode from Dark Only to Normal.
I have recently discovered that there is more to gradients in GIMP than I had previously thought: the different varieties of pre-sets, as well as the"off-set" tool. How to make a new gradient of your own? Any other cool stuff? (Being able to manipulate gradients would be cool.)
View 2 Replies View Relatedwhere to find or how to create-copy exactly the same gradient from additional?
How to applicate this gradient into the capitals without any distortion(any change of capitols high and wide etc.).
how to edit/make a gradient with Gimp. I have opened the gradient editor, but whenever i click anywhere nothing seems to do anything. i tried clicking the black arrow,s the white arrows, but i don't see anywhere i can do what i need exactly.
when i right click within the editor area also, most things are greyed out making it unclickable.
When I choose blend, the tool options dialog comes up, but there is no selection for gradient (like "full spectrum," for example) available. The only option is "FG to Transparent."
I have tried uninstalling GIMP and then re-installed it, but there is still no gradient selection available. I am using GIMP 2.8.2.
I have a foreground and background color selected. I want to draw a line with a gradient between the two colors. All I get is a line in the foreground color.
The help talks about a checkbox "use color from gradient" but I don't have that on my tool options. I can see the sample gradient displayed there though.
There GIMP airbrush has a problem that is gradient segment . How to set airbrush for more smooth and soft stroke without any blur effect . There i used "smooth stroke" option but it's not smooth . Gradient segments always there .
View 3 Replies View RelatedI've got a real problem here with the Script-fu Gradient Overlay. Every time I try to use it and click on any of the buttons - see screenshot for full list - it shuts Gimp down. There's no warnings, Gimp just suddenly vanishes and if anything is being worked on then all the changes are lost.
View 2 Replies View Relatedat least as far as anything beyond re-sizing and basic stuff goes.
I want to create a shaded area that goes from light to dark (a gradient?), so as to create the effect of a book page (sort of), as in the images on this page: [URL]
I have done something similar in Paint Shop Pro, a long time ago, but the details escape me.
I have been playing with the Gradient Flare in the filters. There are a lot fo edit commands here which I like, but I seem to be missing one, the direction of the flare. They always seem to run from the lower left to the upper right. Is there a way to turn the flares in different directions? I have gone through all the commands and still havnt had no luck.
View 1 Replies View Related