When I choose blend, the tool options dialog comes up, but there is no selection for gradient (like "full spectrum," for example) available. The only option is "FG to Transparent."
I have tried uninstalling GIMP and then re-installed it, but there is still no gradient selection available. I am using GIMP 2.8.2.
I've been using a radial gradient on a mask to create a selection, then messing with the selection with various tools, e.g. saturation, blur, contrast. All this on a duplicate of the background layer, of course.
On my most recent attempt, I noticed "rings" in a portion of the finished image. Is the sequence in which I'm using the tools the problem? Should I work on the top layer first, THEN create the selection? Here's a crop from the image:
I was just starting to experiment with the gradient tool last week. I could have a circle as the selection, use the gradient, and then it would make the gradient within my circle all nice.But now whenever I try to use the tool, it fills my entire layer with the gradient instead.I know I still have the circle selected.
View 1 Replies View RelatedI'm in the process of making a collage which consists of several layers with elements cut out from photographs (=these elements make up the composition). All elements have their separate layer.
My question is how can I apply a gradient overlay to a selection or 1 element(=on seperate layers).
I found how I can apply a gradient overlay but this is for the whole image instead of 1 specific element in the composition.
It's a work in progress so eventually all the gradients will line up as in this image:
what setting to I need to change to get rid of the white pixels around the black outline? I'd like the gradients to touch the outline instead of looking all jagged.
What I want to do is make a row of five small thumbnail images that blend into each other. I've got them on five separate layers, and I just want to be able to select the edges of the pictures and create a horizontal gradient that makes the very outer edge almost 100% transparent, and the inner edge of my selection 100% opaque.
View 1 Replies View RelatedI am using CS3 Mac, 10.0.1
I open a JPG and enter quick mask. I use the gradient tool with a radial gradient and make a small gradiated area. It appears in red fading out to the edges. So far so good.
I USE to be able to exit quick mask, and that gradient would now be a selection. What is happening now though is when I exit quick mask, the area selected is the entire image and not the gradiated area.
How can you get a big colour wheel selector when adjusting your gradient?
Atm all I have is a silly little bar, and you can't get a great variety of colours from that.
Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
I came to adobe to upgrade CS5 to CS6 and it appears that it is no longer available - What the heck? I used ADOBE PS since the ver. 4.1 and nearly all in between. I feel like I just got B slapped for no good reason.
View 10 Replies View RelatedI know how to blend selection edges of a selection in Gimp 2.8.2, but if I have only one side of a selection that needs blending, what should I do?
Lets say that I have a grey box on a black background and only want to blend the left vertical edge into the background.
Every time I make the second selection in a picture with the lazo the first selection disappear. what can I do to fix it?
View 8 Replies View RelatedI created a drawing document in AutoCAD LT using custom drawing properties and then inserted them as the text in blocks using insert field. I did this in AutoCAD 2012. I am now working at a new company that is using 2007. I cannot seem to access the feature in 2007. In what version did this feature become available?
View 2 Replies View RelatedJust working through a few designs and noticed that quite a few of the Pantone colors don't exist in XD7 Pro so far all six colors i wanted to use are not in the libraries. How to update the Xara Pantone palettes.
View 4 Replies View RelatedSince I am working in Photoshop 6, I do not see a "healing brush" tool on my toolbox. The course I am trying to help my granddaughter with is designed for Photoshop7. Is there any tool in "6" that will have the same function as the healing brush - or is it hiding out somewhere in 6?
View 4 Replies View RelatedWithin Photoshop a user can view our registered serial number copy it down and use it elsewhere.
Is there anyway to protect/hide our serial number?
I am guessing not, in which case is it possible to have activation for our serial number via phone only adn we have a verbal password?
I'm having some trouble in AutoCAD LT 2009 with block files.
I need the blocks I create to be available to every drawing I create, but somehow, I'm doing something wrong because I can only access them from the drawing I created them in.
In this example I did the following
1. used the circle marquee and did a 8 point stroke.
2. Selected the circle with the magic marquee to get an active selection
3. Gradient tool
Doing the above results in jagged edges that alias badly once I fill the selection with the gradient. With a basic color the circle is perfeclty fine, only once I add the gradient the edges become jagged. How might I fix this?
I am a new user to Gimp and have gone out and watched many videos regarding how to use the different tools. I have recently been toying with the gradient tool on some text. Everything worked perfectly at first, but recently it seems to not be responding. Here are the steps that I take:
Open a new file with transparent background
Create a text box
Type in the text and adjust the font size and style
Go under layer, transparency, and select alpha to selection
Select gradient, select colors, select Dark Only mode
Drag my line from left to right across the text
When I used this exact technique last week it worked just fine, now, it either does nothing at all or will only respond only if I change mode from Dark Only to Normal.
I have recently discovered that there is more to gradients in GIMP than I had previously thought: the different varieties of pre-sets, as well as the"off-set" tool. How to make a new gradient of your own? Any other cool stuff? (Being able to manipulate gradients would be cool.)
View 2 Replies View Relatedwhere to find or how to create-copy exactly the same gradient from additional?
How to applicate this gradient into the capitals without any distortion(any change of capitols high and wide etc.).
how to edit/make a gradient with Gimp. I have opened the gradient editor, but whenever i click anywhere nothing seems to do anything. i tried clicking the black arrow,s the white arrows, but i don't see anywhere i can do what i need exactly.
when i right click within the editor area also, most things are greyed out making it unclickable.
I have a foreground and background color selected. I want to draw a line with a gradient between the two colors. All I get is a line in the foreground color.
The help talks about a checkbox "use color from gradient" but I don't have that on my tool options. I can see the sample gradient displayed there though.
There GIMP airbrush has a problem that is gradient segment . How to set airbrush for more smooth and soft stroke without any blur effect . There i used "smooth stroke" option but it's not smooth . Gradient segments always there .
View 3 Replies View RelatedI've got a real problem here with the Script-fu Gradient Overlay. Every time I try to use it and click on any of the buttons - see screenshot for full list - it shuts Gimp down. There's no warnings, Gimp just suddenly vanishes and if anything is being worked on then all the changes are lost.
View 2 Replies View Relatedat least as far as anything beyond re-sizing and basic stuff goes.
I want to create a shaded area that goes from light to dark (a gradient?), so as to create the effect of a book page (sort of), as in the images on this page: [URL]
I have done something similar in Paint Shop Pro, a long time ago, but the details escape me.
I have been playing with the Gradient Flare in the filters. There are a lot fo edit commands here which I like, but I seem to be missing one, the direction of the flare. They always seem to run from the lower left to the upper right. Is there a way to turn the flares in different directions? I have gone through all the commands and still havnt had no luck.
View 1 Replies View RelatedI have an image I am trying to create that I want to fade from right to left. In other words, I want the right side of the image to be full clarity, color, etc., and have it generally fade to almost gone by the time it gets to the left edge. Think of it as a gradient for an image.
Any way to do that with Gimp?
I found a blur tool. If I cannot do this with some kind of gradient tool, is there a "fade" tool?
I am unable to add a gradient to an image. I do the following:
-Select a gradient (I just selected a default gradient to start off with)
-Then I select a region of the image that I want to apply the gradient to (I use the rectangle select tool)
-Then I switch back to the gradient tool
-Then I hover the cursor over the selected region of the image. This is where I expect to be able to click the mouse down and drag to create the gradient. However, when the cursor hovers over the image the cursor turns into a black circle with a line through it (which obviously is telling me "no, you can't do this"). Obviously, when I click and drag, nothing happens.
I am trying to recreate a tilt shift effect on a photo but I cannot use a gradient except once and then it cancels out the first when I try to add a second blur in an opposite corner. How do I add multiple gradient to the same image?
View 2 Replies View RelatedI am having a problem with my Text to Path, specifically, I want to apply a gradient to my text, however when I make my path and select my text, the outline only appears over part of my text and thus I am not able to apply the gradient to the entire block.
Edit:
It seems like there is a character limit for this type of text, because I added some characters and it shrunk my selected area further.
