There GIMP airbrush has a problem that is gradient segment . How to set airbrush for more smooth and soft stroke without any blur effect . There i used "smooth stroke" option but it's not smooth . Gradient segments always there .
View 3 Replies
I am a long time gimp user and also a long time intuos user and I just recently got the airbrush pen for my intuos. I am running windows 7 and gimp 2.8. I am trying to figure out how to get the wheel on the airbrush pen to do something like adjust occupancy for example but I cant get any wheel settings to work. I am not sure if gimp recognizes that its a different pen. Any airbrush pen or a pen with a wheel in gimp
View 1 Replies View RelatedUsing Debian testing - Gimp 2.6.11 and when I create a graphic I try to use airbrush, brush or pencil and I can't get them onto the graphic. The colour tester does get onto the graphic and works.
for the others the cursor vanishes and only the arrows on the ruler top and side move about. The cursor is behind the graphic? Moves out from under when I move off the graphic.
there's a way to setup a keyboard shortcut to adjust pressure and rate for airbrush and smudge tools? I swear I've been up and down the whole shortcuts list... and perhaps I'm just missing something...
View 2 Replies View RelatedI want to draw triangle in segment of polyline in segment direction.
I have target segment and center point of it:
Polyline line = ...
LineSegment3d centerSegment = line.GetLineSegmentAt(centerSegmentIndex);
Point3d centerPosition = centerSegment.MidPoint;
I can find direction of this segment:
Vector3d zaDirection = line.GetLineSegmentAt(centerSegmentIndex).Direction;
Next, I create list of points:
List<Point3d> points = new List<Point3d>();
points.Add(centerPosition);
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)));
points.Add(centerPosition.Add(new Vector3d(ZASize, -ZASize, 0)));
And draw it:
wd.Geometry.Polygon(new Point3dCollection(points.ToArray()));
Ok, I have triangle but... it's not in segment direction, it's X-direction.
I try to rotate it:
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)).RotateBy(0, zaDirection, centerPosition));
But it's not the same as I want.
How I can draw triangle by serment direction?
Flow segment label using total Flow Type travel time for each segment:
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....
I am a new user to Gimp and have gone out and watched many videos regarding how to use the different tools. I have recently been toying with the gradient tool on some text. Everything worked perfectly at first, but recently it seems to not be responding. Here are the steps that I take:
Open a new file with transparent background
Create a text box
Type in the text and adjust the font size and style
Go under layer, transparency, and select alpha to selection
Select gradient, select colors, select Dark Only mode
Drag my line from left to right across the text
When I used this exact technique last week it worked just fine, now, it either does nothing at all or will only respond only if I change mode from Dark Only to Normal.
I have recently discovered that there is more to gradients in GIMP than I had previously thought: the different varieties of pre-sets, as well as the"off-set" tool. How to make a new gradient of your own? Any other cool stuff? (Being able to manipulate gradients would be cool.)
View 2 Replies View Relatedwhere to find or how to create-copy exactly the same gradient from additional?
How to applicate this gradient into the capitals without any distortion(any change of capitols high and wide etc.).
how to edit/make a gradient with Gimp. I have opened the gradient editor, but whenever i click anywhere nothing seems to do anything. i tried clicking the black arrow,s the white arrows, but i don't see anywhere i can do what i need exactly.
when i right click within the editor area also, most things are greyed out making it unclickable.
When I choose blend, the tool options dialog comes up, but there is no selection for gradient (like "full spectrum," for example) available. The only option is "FG to Transparent."
I have tried uninstalling GIMP and then re-installed it, but there is still no gradient selection available. I am using GIMP 2.8.2.
I have a foreground and background color selected. I want to draw a line with a gradient between the two colors. All I get is a line in the foreground color.
The help talks about a checkbox "use color from gradient" but I don't have that on my tool options. I can see the sample gradient displayed there though.
I've got a real problem here with the Script-fu Gradient Overlay. Every time I try to use it and click on any of the buttons - see screenshot for full list - it shuts Gimp down. There's no warnings, Gimp just suddenly vanishes and if anything is being worked on then all the changes are lost.
View 2 Replies View Relatedat least as far as anything beyond re-sizing and basic stuff goes.
I want to create a shaded area that goes from light to dark (a gradient?), so as to create the effect of a book page (sort of), as in the images on this page: [URL]
I have done something similar in Paint Shop Pro, a long time ago, but the details escape me.
I have been playing with the Gradient Flare in the filters. There are a lot fo edit commands here which I like, but I seem to be missing one, the direction of the flare. They always seem to run from the lower left to the upper right. Is there a way to turn the flares in different directions? I have gone through all the commands and still havnt had no luck.
View 1 Replies View RelatedI have an image I am trying to create that I want to fade from right to left. In other words, I want the right side of the image to be full clarity, color, etc., and have it generally fade to almost gone by the time it gets to the left edge. Think of it as a gradient for an image.
Any way to do that with Gimp?
I found a blur tool. If I cannot do this with some kind of gradient tool, is there a "fade" tool?
I am unable to add a gradient to an image. I do the following:
-Select a gradient (I just selected a default gradient to start off with)
-Then I select a region of the image that I want to apply the gradient to (I use the rectangle select tool)
-Then I switch back to the gradient tool
-Then I hover the cursor over the selected region of the image. This is where I expect to be able to click the mouse down and drag to create the gradient. However, when the cursor hovers over the image the cursor turns into a black circle with a line through it (which obviously is telling me "no, you can't do this"). Obviously, when I click and drag, nothing happens.
I am trying to recreate a tilt shift effect on a photo but I cannot use a gradient except once and then it cancels out the first when I try to add a second blur in an opposite corner. How do I add multiple gradient to the same image?
View 2 Replies View RelatedI am having a problem with my Text to Path, specifically, I want to apply a gradient to my text, however when I make my path and select my text, the outline only appears over part of my text and thus I am not able to apply the gradient to the entire block.
Edit:
It seems like there is a character limit for this type of text, because I added some characters and it shrunk my selected area further.
I've made an abstract background using a gradient fill on the background and some ellipse selections also filled with overlay gradients. This image has been saved as .xcf before closing down Gimp. When I reopen the image, I don't see any way to remove the gradient fill so that I'm just left with the selection.
Ultimately, I want to change the gradient colors .
I am having trouble making a gradient image. I know the two colors I need, but the gradient isn't working for me.
View 4 Replies View RelatedI've been using a radial gradient on a mask to create a selection, then messing with the selection with various tools, e.g. saturation, blur, contrast. All this on a duplicate of the background layer, of course.
On my most recent attempt, I noticed "rings" in a portion of the finished image. Is the sequence in which I'm using the tools the problem? Should I work on the top layer first, THEN create the selection? Here's a crop from the image:
I'm designing a banner for my gaming guild's forums. I have draw the logo/banner and textured it. After Desaturating the image im left with a nice B&W image.
I know of many ways to color the image but everytime that I do the color doesn't match the other colors we have on the forums.
What I want to do is color the image according to a color gradient that we use on the forums.
I would like to have the whitest pixels of the banner be the lightest color from the gradient(#c0a864) and the darkest pixels of the banner be the darkest color from the gradient(#917341). And have GIMP interpolate between those two colors for the other pixels in between the lighest/darkest.
Similar to how a Bumpmap works, only instead of simulating depth based on the range of colors from Black to White, I want it to colorize the banner.
I have a wide background image for the top of a site I am working on, which I am attaching. Basically, the original creator of the image faded the gradient from transparent to the background color of the site. The "shape" of the gradient is where I am having trouble. I tried even using the circle selection tool, then doing an inverted selection to force an oval shape, but that is not working great for me either.
View 4 Replies View RelatedI'm trying to make a rounded-corner box with a gradient-style border. Obviously, the straight sides of the box are easy to create the effect for, but not so the rounded-corners.
How to I get the gradient to follow the curve - to blend from the curved edge - rather than just giving me a linear gradient as if I was doing it from a rectangular corner?
I tried some other gradient types, there didn't seem to be anything that did the trick.
I'll try to attach a quick test file, if it lets me, to illustrate what I'm talking about. Note how the gradient cuts out diagonally across the rounded corner rather than curving and following the corner around.
Or is there a different way to create this kind of border?
I'm using Gimp 2.8.4, Win8.
I also noticed the "Left Endpoint's Color" is not available.
I'm fairly familiar with Gimp in general, but never needed to get this deep editing gradients. Of course, if those sliders would move I could have figured out the rest...
What I'm trying to do is curve a white to black gradient along a windscreen wiper smear for a rail engine cab window I need to texture. I'm building the cab for an engine in RailWorks and to get the wiper to clear raindrops from the screen in time with the wiper motion the texture needs a gradient applied to it from the wiper rest position to full up position.
In the picture the actual wiper smear is all black. What I need to do is have it all white from the vertical part of the smear or the wiper rest position, to all black at the maximum part of its stroke. This means the gradient will be a lot shallower on the outer edge of the arc and a lot steeper at the inner edge of the arc.
What I want to do is take a design and automatically filter it to divide it into four parts that are moved into the corners of the image for tiling, like the Make Seamless feature. But I don't want any image-changing effects other than that, like gradients, which can't be turned off when using Make Seamless. What can I do?
If I have to do it manually, how do I do this? I can't seem to understand how to use the grid or ruler to find the exact center or divide the image into four equal parts.
I'm completely new to Gimp, and have one task that I would like to complete. I'm a fiberartist and would like to replace the backgrounds in my photos with a gradient one.
I have managed to create a "gradient image", and have also tried to follow a PDF tutorial, and YouTube video. The dialog boxes didn't match and I wasn't successful. I tried finding "decompose" and "mask", but it may be the instructions weren't spot on.
I have downloaded Gimp 2.8
I was just starting to experiment with the gradient tool last week. I could have a circle as the selection, use the gradient, and then it would make the gradient within my circle all nice.But now whenever I try to use the tool, it fills my entire layer with the gradient instead.I know I still have the circle selected.
View 1 Replies View RelatedI'm in the process of making a collage which consists of several layers with elements cut out from photographs (=these elements make up the composition). All elements have their separate layer.
My question is how can I apply a gradient overlay to a selection or 1 element(=on seperate layers).
I found how I can apply a gradient overlay but this is for the whole image instead of 1 specific element in the composition.
