there's a way to setup a keyboard shortcut to adjust pressure and rate for airbrush and smudge tools? I swear I've been up and down the whole shortcuts list... and perhaps I'm just missing something...
View 2 RepliesI like to use keyboard shortcuts in GIMP to select different tools or to nudge an image, but I frequently click on the layers window, which causes keyboard shortcut commands to then be directed to the layers window. So whenever I click to select a different layer or do anything with layers, afterwards I always have to have to click on the image window again to regain use of my editing keyboard shortcuts.
Because of this, I also often forget that layers window has focus and end up messing up my layers with key-shortcut commands intended for the image window. Is there some change I can make to my workflow or keyboard bindings to avoid this problem?
I'm hoping this is a dumb problem that is easily disabled with a perhaps inadvertently-enabled Preference somewhere.In the past few months I've had a lot of trouble with tools I've selected via shortcut key not... "sticking".
In other words, I'll press "Z" for Zoom or "V" for Move, and before I have a chance to use the tool, it's reverted back to whatever tool I was using already. I can sit there and watch it revert back after a few moments on its own.
If I select the tool from the Tool Palette manually by clicking the icon with the mouse, it always stays, as expected.
I seem to encounter this problem more often when I'm utilitizing a lot of RAM or have a very complex document open. Restarting Photoshop seems to "fix" the problem temporarily, but eventually it starts happening again.
I'm using CS6 13.0.5 x64 on OS X 10.8.4.
How to assign keyboard shortcut for brush opacity in GIMP...
View 1 Replies View RelatedAny way to make the "click" function into a keyboard shortcut in gimp. I use a mouse, but the clicking interferes with my strokes (I like to hover my mouse gently. This way is faster and more presice for me.) I ould like to know if I can use a key like backslash or "v" to replace the clicking action when using brushes.
View 1 Replies View RelatedI have Gimp 2.8 and I am using Single-Window Mode. I have about 15 images open at the same time and I am doing repetitive tasks on each of them. I made keyboard shortcuts to do the tasks themselves but I still have to use my mouse to go up and click the next tab to start work on the next image. It would save time if there were a keyboard shortcut. I see that under the Windows menu I can use Alt+1 through Alt+0 to select any of the first 10 images, but I have 15 open.
I wanted to know if there is a keyboard shortcut to just switch to the next tab or the previous tab.
Is there any way to create a keyboard shortcut to put focus on the image window? I see how to create shortcuts to select every window except the image window, and it if I could just select the image window with a keyboard shortcut, GIMP would be much easier for me to use.
Also is there a way to create a keyboard shortcut to toggle the visibility of a layer?
how to adjust the scroll rate when you zoom in on an image? Back in version 5, PS used to automatically adjust the scroll rate when you zoom in on a pic so you're not scrolling really fast past the area you're trying to work on, but now (using PS7) when I zoom in on an area of a picture, the scroll rate doesn't seem to change so when I try to just slide a few pixels horizontally or vertically, it quickly jumps to the far end of the picture.
View 4 Replies View RelatedIs there a way to add a keyboard shortcut or marking menu shortcut for visibility? It would be really convenient to be able to shift-click several objects and toggle the visibility of them. I have a mouse with numerous buttons that are mapped to commonly used IV features, but I cannot find a way to map a visibility toggle.
View 9 Replies View RelatedRunning Photoshop CC 64, Win7 x64 on an i7-3820 based machine with 32GB of ram, 256GB SSD, several 2TB drives and a GeForce GTX 650 Ti 1GB 16X video card.Running the latest non-beta WHQL drivers for the video card,
i have photoshop set to: use graphics acceleration, drawing mode advanced, opencl. When I'm using the mixer brush and with the brush set to sample all layers, depending on brush size, I experience a large lag in rendering. When doing this, my CPU usage is around 10% and disk usage is also low so I'm assuming the graphics card is the bottleneck here.
Images are from a 21MP canon 5dMK II, 8 bit files. I can replicate the problem with a single background layer and mixing/smudging on a 2nd transparent layer set to use all layers.
I am using Photoshop with Wacom Bamboo graphic tablet. I sometimes want to use pen pressure but sometimes not.
Is there a shortcut key that can toggle between "pen pressure" and "off"
There GIMP airbrush has a problem that is gradient segment . How to set airbrush for more smooth and soft stroke without any blur effect . There i used "smooth stroke" option but it's not smooth . Gradient segments always there .
View 3 Replies View Relatedhow to make a data shortcut to a pressure network? Is this feature even available? It seems odd that this feature would be left out of C3D 2013 when it is critical to plan production.
View 1 Replies View RelatedI am a long time gimp user and also a long time intuos user and I just recently got the airbrush pen for my intuos. I am running windows 7 and gimp 2.8. I am trying to figure out how to get the wheel on the airbrush pen to do something like adjust occupancy for example but I cant get any wheel settings to work. I am not sure if gimp recognizes that its a different pen. Any airbrush pen or a pen with a wheel in gimp
View 1 Replies View RelatedUsing Debian testing - Gimp 2.6.11 and when I create a graphic I try to use airbrush, brush or pencil and I can't get them onto the graphic. The colour tester does get onto the graphic and works.
for the others the cursor vanishes and only the arrows on the ruler top and side move about. The cursor is behind the graphic? Moves out from under when I move off the graphic.
I'm currently using Win2000 and photoshop CS. When I'm going to use shortcut, there is no response at all. After I check the keyboard shortcut preferences, it's normal. What's wrong with my computer?
View 3 Replies View RelatedWhen you're cropping an image in Fireworks (or any other type of selection box) you can use the keyboard to move the box around, increase or decrease it in size horizontally or vertically all using the keyboard using CTRL + SHIFT + (arrow keys) in 1px increments.
View 1 Replies View RelatedThe UI method to pan down the viewport (e.g. Front view) is to use the hand tool and drag. This much we all know. However, I am drawing a shape with the line tool and, because it will be a large shape with many vertices, I am zoomed in and need to continually extend my line out of the viewport. I can't zoom out because I need to see the detail. Is there a keyboard shortcut for this panning? Obviously I can't use the hand tool without letting go of my line.
In Photoshop, the viewport pans with you if you extend your lasso tool (for example) way outside the viewport. Max does not do this..
Is there way to assign keyboard shortcut to do same thing as holding left mouse button over the ViewCube and movng mouse? E.g. hold Ctrl + MMB (middle mouse button) and move mouse.
Reason i dont like Alt + MMB or Ctrl + R (orbit view mode) is because it rotates view around the center of viewport, cube does same when no object selected, when object selected cube rotates view around that object!
Its such a time waste to look at cube then move mouse to it aim exactly at cube ... with keyboard modifier all needed to do it to hold button.
I am not quite sure what happened, but now my smudge brush (I have CS version) will not smudge, it only colors. I'm not quite sure how to fix it short of reinstalling photoshop again, and I'd rather not do that if I don't have to.
View 1 Replies View RelatedI have modified one of the toolbars (Text toolbar) with many useful for me commands. Many of them are not visible when this toolbar is "docked" to Corel's interface, that's why I want to view it floating.
But because there is "Object Information" from Status Bar, and it is only one line (very wide indeed, and I cannot find a way to make it in two or more lines of text (?)) this toolbar became very wide and I want to hide and show it with a shortcut. It is annoying to right click on interface, to click on "Text" to open when I need it, and to go to "x" to close it all the time.
Now I am looking to find a way to assign a shortcut to open and close it. Is this possible in CorelDRAW X6?
I am trying to record an Action where the dialogue box for Flatten/Cancel/Don't Flatten comes up. Flatten is the default selection but I would like a keyboard shortcut that allows me to select "Don't Flatten".
View 7 Replies View RelatedI updated my Mac and everything was fine until i had to restart it. My Photoshop's keyboard short cut became all random like this:I tried restarting my computer again but it has not changes.
The most weird part is that when i tried to change the short-cuts, it won't work even though i clicked on accept and "ok". Is there a way i can turn this back? It wasn't like this when i first got this back at November.
I want Ctrl+Shift+S to do SAVE AS. I set it as such in the keyboard shortcuts, but when I do that key combo, all I get is this: The mouse pointer changes to this. I can move it around and draw a box (in the background of PS, outside any open images). I want it to go away and do SAVE AS instead.
View 4 Replies View RelatedAfter 5 action (shortcut) my keybord block all my shortcut, i have to press 5 times the option key..
View 7 Replies View RelatedHere's on online tool to memorize PS keyboard shortcuts better:
keycommands (dot) info.
The entire Creative Suite seems to be there too.
Does anyone make a laminated cheat sheet of Photoshop CS 3 keyboard shortcuts? I spent a few hours trying to figure out how to do something that I could not find in any of the menus. Finally I found a reference to it in one of my books as a keyboard shortcut.
View 1 Replies View RelatedI have my primary tablet pen button bound to alt for the eyedropper tool, and often press [ and ] to change the brush size. Sometimes I hit alt and [ or ] together, which causes the active layer to switch up or down. It happens a lot and gets frustrating, especially if I don't notice immediately notice the active layer has changed.
The question is, how do I remove the alt+[ and alt+] bindings? They're not listed under the Edit - Keyboard Shortcut options and I can't find them anywhere else either.
I've tried a number of ways round it but the only one that remotely works is to change the brush size keys themselves.
Well ive searched and i cant find one. this as typing REGION repeatedly is annoying
View 6 Replies View RelatedI'm using Max 2008 at work. I'm trying to set a keyboard short cut for Connect (with the dialog box popping up) and the same with Chamfer.
So what I have done so far is: Customize User Interface > Keyboard Tab > Connect (With Dialog) (Poly) and assigned a short cut and saved the UI.
It doesn't work even after restarting max, just wondering if there's anyway around this? Same happens with Chamfer options.
I find myself typing quite a bit of text that has the ® and ™. Many times the font, when it has that typed, is too big, so I have to use the type panel with the flyout menu to then change the character to superscript. In InDesign there is a keyboard shortcut for this. Is there ANY way to do the same thing in Illustrator?
View 3 Replies View Related