AutoCAD .NET :: How Polyline Overlap Itself
Oct 5, 2011I have a polyline and need to check whether it overlap itself. What do I need to do in vb.net?
View 9 Replies
ADVERTISEMENT
AutoCad 2D :: Drawing Polyline To Have Tooltip Box Show Cumulative Length Of Polyline
Nov 6, 2013Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Reduce Polyline With Multiple Vertices To Single Polyline
Jun 7, 2012I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: 3D Polyline To Polyline To Spline With Max
Sep 21, 2013Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
AutoCAD .NET :: Getting Polyline Data Into A Custom Derived Object (from Polyline)
Nov 11, 2013I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
AutoCAD Civil 3D :: Convert Metric 3D Polyline To 2D Polyline
Jun 29, 2013I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedAutoCad :: Automatic Join Polyline Onto Existing Polyline?
Sep 16, 2011Is there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
AutoCAD Civil 3D :: Align Polyline Onto Another Polyline
Mar 22, 2012Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
AutoCAD .NET :: How To Find If Polyline Is Inside Another Polyline
May 18, 2011How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedAutoCad :: Overlap Viewports One To Another?
Mar 27, 2012I would like to overlap the viewports one to another like using Draworder command with raster image. see my attachment to get what I mean.
View 4 Replies View RelatedAutoCAD Map 3D :: GIS Parcel Lines Overlap
Mar 3, 2011I have a GIS parcel file that I have connected to. The file works fine, but when I change the linetype from continuous to a center or dash-dot linetype I have trouble. The parcels are all closed polygons so everywhere the parcels touch, the parcel lines overlap and the linetype is very disjointed. Instead of looking like a "center" line, it looks like a solid line with a radom gap here and there.
View 5 Replies View RelatedAutoCAD 2010 :: Polyline To 2D Polyline?
Mar 2, 2012How do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedAutoCad 2D :: How To Convert 2D Polyline To Polyline
Jun 25, 2008I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedAutoCAD .NET :: How To Delete Overlap Entity In Drawing
Dec 2, 2012How to delete overlap entities in drawing?
Here i attached the dwg file.
AutoCAD Civil 3D :: Profile Grid Overlap
Jul 6, 2011I have the profiles grid to display as my company has displayed them for several years and it worked perfect in 2009. Then we switched to 2011 and now the grid is overlapping back on itself (see attached).
I am working with my reseller and I have done everything that I can think of to get this to not show with no luck. This needs to be fixed by Autodesk in my opinion since we pay for the product to work and it did before. This is apparently an issue in 2012 as well.
How to get it back to the way it was before?
AutoCad :: Make Shape Overlap The Contents Below?
Aug 8, 2012I have a drawing with a lot of lines, already, in autocad. Now I want to add tags to the drawing. Meaning, I create a shape, a rectangle and put some words in it. Now I want to paste the rectangle tag with the words over my many lines drawing. But I want whatever lines that gets into the rectange frame to get overlapped by black space in the rectangle.
Its like pasting a sticker tag over my drawing. (what command to type )
AutoCAD Civil 3D :: Point Label Overlap
Mar 21, 2012I'm thinking that AutoCAD has no such feature, but I'll ask just to make sure.
What I am doing is mapping points which each have a simple point number label. (asbestos load buried in landfill in case you are curious) There are many points which have the same coordinates (up to 20 points sometimes). So, then I have to drag each label individually until all labels are visible.This take a ridiculous amount of time when you are talking about 1000+ points.
AutoCAD Map 3D :: Find Lines That Overlap One Another In A Drawing And Mark Them?
Jul 31, 2012I need to find lines that overlap one another in a drawing and mark them, not delete them. I am running AutpCAD Map 3D 2012.
View 3 Replies View RelatedAutoCAD Inventor :: Overlap Flange In Sheet Metal?
Oct 28, 2012I tried to create a overlap flange in sheet metal, but the result is not what I want as I cannot select the gap edge near the circle portion. I attached the file here.
View 3 Replies View RelatedAutoCad :: Delete Duplicate / Overlap Point Object
Oct 25, 2011How to delete duplicate or overlap point object? I tried with overkill command, But I didn't get output.
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Routine To Check Overlap
Aug 12, 2012I want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies View RelatedAutoCAD Inventor :: Miter Sheet Metal Corners Where They Overlap
Jan 29, 2012I cannot seem to get INV to miter my flange corners where they overlap..
Attached is part I am working on.
AutoCAD Civil 3D :: Assembly Overlap When Assigning Targets For Median In Corridor
Jul 9, 2012Here's my assembly :
and
when I tried to assign the Median Width in my corridor to a polyline representing media width,
I got this overlap in my Section view :
how can I maintain Objects in this cause "Lanes" attached to median no matter width change ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
AutoCAD Visual LISP / AutoLISP :: Routine To Alert To Overlap Dimension Lines?
Sep 9, 2013Sometimes someone dimensions a floor plan and starts one direction and then "goes back " the other way over the top of the dimension they just placed, which causes the dimension lines to overlap, which in turn shows incorrect distances when viewing on paper. Any lisp routine that can alert you to the fact that there are overlapping dimension lines (not the extension lines) in a drawing by changing them to color White or something? I have pasted a routine that we use which changes all dimenions with "modified text" to color white. That way I can see if someone just typed in the dimension distance they wanted instead of what was actually there.
(defun c:dc (/ dim_length)
(setq ssmod (ssget "X" (list (cons 0 "Dimension")(cons 1 "~"))))
(if ssmod
(progn
(setq dim_length (sslength ssmod))
(command "Change" ssmod "" "P" "C" "w" "")
[Code] ......
AutoCAD Map 3D :: Select Polyline By Intersecting Polyline (select By Location)
Aug 10, 2012I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
AutoCAD Civil 3D :: How To Convert 3D Polyline Contour To Polyline Contour
Mar 24, 2013How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedAutoCAD Civil 3D :: Multiple View Frames Creation With Preset Station Ranges And Overlap
Mar 1, 2012The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
Paint.NET :: How To Overlap Two Images
Mar 3, 2011I am trying to overlap two images but one is really dominating visually and is also really busy. I'd like to 'fog out' the dominating picture without losing a lot of information from it. I think making the colors less vivid would enhance the colors of the other image, but maybe there's more I can do? The images are biological and I am working on a potential scientific journal cover page, so I can't just remove things or distort to the point where it is cartoonish. I know nothing about image processing, so I feel like I'm probably complete unaware of simple methods that could do amazing things I was unaware of above and beyond just toning down contrast or saturation.
View 4 Replies View RelatedPhotoshop :: How To Prevent Opacity Overlap
Dec 15, 2012When using Brush, the opacity doubles whenever my stroke overlaps whatever I've already filled. What setting prevents this?
View 1 Replies View RelatedVideoStudio :: Can Overlap Clips Without Transitions
Oct 21, 2010Can I overlap clips without a transition? Here's what I'm trying to do (VS Pro X3) - I have about 30 clips that I'm putting together. All of the clips need trimming at both ends. With Sony Vegas 9, I only had to trim the beginning of each clip because then I could overlap the clips to "trim" the END of each clip (the clip previous to the overlapping clip). It appears to me that with VS Pro X3 I have to trim both ends of each clip and then put them all together end-to-end because when I overlap them, the overlapping clip doesn't actually overlap the previous clip on the timeline, but both clips transition into one another. What I want is for the overlapping clip to truly overlap the previous clip, effectively ending that clip at the point of overlap. If I don't want transitions, must I trim all clips on both ends and put them together with no overlaps?
And BTW I don't use my Sony Vegas 9 (Platinum Pro Pack) any more because the program has a bug that makes mp4 rendering impossible, and other renders very sketchy.
Photoshop :: Transparent Stroke Overlap
Jun 13, 2007I am currently working on a very simple illustrator project and I have run into the following issue.
In the image below, there is an object with a green fill and semi-transparent stroke. Another stroke (Also semi transparent) is overlapping the first stroke a bit and, as one would expect, the two objects appear darker where they overlap.
Is there any way to prevent this? Basically, I have two stroked objects that share a border in a small area and where they overlap, the strokes are darker due to the semi-transparency. Is there a way to keep the overlapping part one uniform color?
Unless I am mistaken, there is no way to have one point have 2 lines coming off of it. If there is, I could make one stroke for both objects... If not, I need to find a way to have the overlapping area look as if it has one stroke, not two. Or get the stoke onto it's own layer...