Is there a way to tweak the boundary of callout bubble?
For example, if my wall section is cropped in to a L shape that includes the footing. Can the callout boundary looking like an L shape as well instead of a big wide rectangle?
Is there a way to break the Callout Boundary similar to the Section Line in Revit Arch 2011 ?
View 9 Replies View RelatedI want my leader line to always have an 'invisible extension' that goes through the centre of the bubble (unlike the attached image)
how do I do this?
There are other people working on details that I need to do callouts for on my plans in Revit-how do I manually manipulate the callout tag without it being associated with anything?
View 9 Replies View RelatedI'm trying to create a 3 digit grid bubble that will align vertically along an elevation, but my grid bubble in use within the project insists on the text being horizontal... Is there any way to force the alignment to vertical...?
View 2 Replies View RelatedUsing Reivt 2011. I am trying to get my callouts to display my devices. I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties. I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked.
View 4 Replies View RelatedRevit Architecture 2012 Callout "Reference other views" is not filling in Callout Labels. I am picking the scale and the picking a View in the "Reference other view" pulldown. The callout labels do not fill in. Just "-". The View I am referencing is a Callout View from a Section already called out on a sheet.
View 3 Replies View RelatedQuick easy way to change the default insertion size of the section and callout heads. They're too large.
View 3 Replies View RelatedHow to change the color of the boundary (outline) of a family type?
I couldn’t find the option by which the boundary (outline) of a family type can be changed..
Is it possible to get the room boundary line in a curtain wall to be set to the inner face of the mullion instead of the inner face of the glass?
I have looked at the System family library but cant find a setting for changing this.
Also, setting the location line is greyed out. Why?
If I draw clockwise I get the location line on the inner face of the glass even if the greyed out location line setting in the options bar is set to center.Why?
I was having trouble with the edit sketch options coming up when I initiated a command that needed it. I upgraded to Update 2 and It seemed to fix it. But now it's happening when when I select a floor. I'm not getting the option to edit the floor. The context options don't match what I have selected. What is the problem and how can I fix this?
View 1 Replies View RelatedBelow is the image of my ribbon after I begin the edit boundary command for a floor slab. For some reason the ability to finish or cancel the edit mode disappears and I'm unable to close out of the command without undoing everything I've done.
View 9 Replies View RelatedI am encountering issues with the "edit boundary" tab on the ribbon, as well as "finish sketch" when the edit boundary tab DOES show up. i don't know how to finish the sketch without this, so i have to undo everything.
View 1 Replies View RelatedHow to draw filled region boundary lines that show up in any color other than gray? it is hard to distinguish the lines I am drawing from the lines that are already there while creating or modifing a boundary. Can I change the color of the Invisible Line (can't find that line modify)? OR does every line created thru manage line style have to have a weight (am I able to make a zero line weight or even a pattern that shows nothing.
View 1 Replies View Relatedi need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
The client is happy with it, but I just want to tweak it some how to get rid of that slight bluish pall over on the right side of the photo. I was hoping that color mixer or channel mixer or something else i'm not familiar with would fix it and what I'd really like is to just make that blue turn into a slight gray so it looks "correct."
View 2 Replies View RelatedI trying to make DOF outputing Mental Ray z-depth render element but I get a lot of defects around objects and between objects. I use AE and FrischLuft to comp the two images, and how to optimize the anti aliason to get rid of the ghost effect and the smearing (see image).
View 2 Replies View RelatedI find it a little hard to use the mouse scroll button for panning and rotating. Often I tend to zoom the scene or in the act of balance the scroll button when pressing it, I don't get the right tool and have to press it again, and that makes it not as intuitive as I would like to. I wounder if it's possible to alter the way I pan and rotate? Can I place the pan and rotate function at the right mouse button? Or is there mouses on the market that have a middle mouse button AND a scroll wheel so I can separate the pan/rotate from the zoom?
View 5 Replies View RelatedI have recently purchased a 3d model of a car which I need to make 3d print ready for a project. I have come a long way since, getting to know the software and finishing all of the chassis. However, whilst editing parts of the car's bottom side, I noticed that when viewed from this perspective it is badly out of shape. When compared to a real model, one can see that the body is way too narrow in between the tires, making the whole thing kinda look like a bone. I have attached pictures of both, the unedited 3d model I purchased as well as a real model which I know to be very accurate to the real thing, to show you what I mean.
View 5 Replies View RelatedAny way to convert area boundary lines to room separation lines?
View 1 Replies View Relatedknow of filter/action/tips for taking an image and composting it onto a screen so that the photo looks like a projected image?
So if I have a photo of a guy on stage besides a screen I can change the image on the screen?
On one of my coworkers computer inventor display is not right. I have tried reinstalling vga drivers and tried to tweak all the display options but nothing happened. see attached showing how the text look like.
Its Inventor 2011, Windows XP64, Quadro200.
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I'm trying to design a flyer for a foam party and I want a bubble effect for the text. What approach do you think will produce the best effect? Here's a flyer with an effect similar to what I want (look at the word FOAM).
View 9 Replies View RelatedI'm working in house for a company on a website that requires graphics similar to the glass bubble effects that are used on Apple's website.
Is there a simple technique to dreate these graphics? Better still is there a downloadable plugin?
as the glass bubble effect is a bit old-hat now...
I am trying to create a brush of a bubble. The end result I want is a colored bubble with a white shine like in this tutorial [URL]...... I am trying to make it into a brush so that I can replicate it easily and add an overlay to make the color.
I am having difficulty getting color in the middle and white as the edge/shine. I keep getting color as the shine and white in the middle. I suppose I am doing something wrong with the choice of white, black, gray, and alpha while making the brush.
I'm looking for samples of the above. To be used in working with Sheet Set Manager tab-to automate Sheet Set organization and view placement.
View 3 Replies View RelatedHow can I modify out of box font size and styles of callout tag such as, room name tags or sections indicators?
View 1 Replies View RelatedI have decided I don't want to have callout blocks in the sheet set. How do I remove this option from my sheet set template? I am hoping I will not need to re-enter all my custom properties in a new template just to not have the callout block.
View 5 Replies View RelatedI found this image on an inspiration gallery, but I have seen these little swirls everywhere. How would I go about making these?
View 4 Replies View Related