How can I switch the orientation of a structural system placed on a tilted face. In other words, I have framing that snaps to the underside, and I need it flipped to the topside of the face.
View 5 Replies
How do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies View RelatedI'm rendering in V-Ray and I need to create a glass on my building with a dot pattern on the exterior face. I'm applying a planar mapping but for some reason the texture is applied on both sides (interior and exterior).
View 4 Replies View RelatedIs it possible Apply on the lock file Not open to other systems?
View 1 Replies View RelatedI was following a tutorial when he created a structural plan where he'd place his footings. when i tried it on my Revit Architecture 2014, i found out that i didn't have that feature. is there any way i can turn it on?
i'm not sure if he's using revit architecture because he just refers to it as Revit 2014. i made a floor plan below the 0 mark but things will be tidier if i could make structural plan views.
In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View RelatedI am having trouble creating my own column and beam
structural column schedule
structural framing schedule
i do not know the settings to be ticked for me to create the schedules and make them appear after i create new scheduling...
also i want to know how the graphical column and beam works...
then setting the level in the schedule to make them reflect instead of using the comments section...
Attach here is a screenshot of the levels...
I am doing the structural frame of a house with curved walls and I needed to use the Model in Place command to create a curve shaped column. I defined it's category as Structural Column, but it takes the fill pattern of the wall. When I isolate the column, it has the same fill pattern as the column from the library. I need that the column will be displayed as the other structural column.
View 1 Replies View RelatedStructural columns are exported as blocks to DWG, even if I have checked the "Always export as geometry" -box in the column family.
View 6 Replies View RelatedWe are using structural steel framing familiies which are sloping in section. Where the view range cuts, the framing does not and the entire member is visible including above the cut plane.
The members are set to cut in plan in "Visiilbity Settings." The view is set to "Fine."
I working on a project in Revit Architecture and I have the Mechanical (MEP) and Structural (Structure) models linked into my model. I need to reference a detail in the structural model/sheet set. Is there a way to do that without creating a false callout tag with linework?
View 1 Replies View Related1) Why structural columns don't show up in architectural plans. The only way I can see to coordinate the structure with the architectural elements is to use structural plans.
2) How to make structural columns visible in architectural plans? I've tried the visibility graphics but everything seems to be turned on by default.
I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View Relatedcreat roof with same line on top roof face & roof vertical side face?
View 2 Replies View Relatedhow to change the demolished and temporary appearances of non-structural elements such as railiings, plumbing fixtures etc?It is straigh forward to use phase overides to change the appearance of Walls etc that are either demolished or temporary, but however you change these appearances non structural elements stubbornly remain with a dotted blue outline. I want demolished railings and other non-structural elements to appear with a red hidden line style but have been unable to find out how this can done.
View 2 Replies View RelatedRevit Architecture 2014? I've been trying to use the structural beam system, but when I select the joist I cannot select the start/end extension in the properties dialog box. I would like to know why is that?
View 1 Replies View RelatedI am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies View RelatedQuite simple what I want to acheive in ACA but not in revit. I want a line elevation view from file A (with shadows if possible) to insert into another file (B) sheet (so it shows another option variant without the complexity of setting up phases to show that option in file B. I can insert from file a render - managed that successfully but I dont want full renders as the the recipient (a planning authority) will plot from a pdf non-colour.
Is there any way of rendering so that the result is mostly line with a bit of half tone? I do elevations within a project this way by setting up a 3D aligned to elevation then sort out what I want shaded / colour / line by graphic overrrides.
Placing a drawing in a sheet is not flexible, I’m wondering about the best practices to place a drawing in the title block/sheet.
For example, in the AuotCAD, I’m used to have a title block, say appropriate for A3, for my drawing to make sure that it will fit well inside the intended paper with the aimed scale.
Here in the Revit, I was struggling to place my drawing in the sheet as there is no snapping or tools for performing this issue the same way we have it in the AutoCAD.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We have a Revit Ar 2011 project that is well along in the modeling process and we have noticed that recently elevation symbols do not display on the cursor while placing. Once the elevation tag has been placed it displays normally. Basically, you are operating somewhat blind until the item is placed. Then you can see it in order to modify the orientation and such.
View 1 Replies View RelatedI want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedI am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
I would like ask if I create wall from mass by using wall by face. However, the walls have slope and they are not connected to each other.
(Please see the picture) When I would like to edit wall only option shows in modify is update to face. Do they have any way to edit this wall as normal?
I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies View RelatedHow to draw a railing over the top of a wall? when the wall's top face is irregular. See the attached image.
View 1 Replies View RelatedIs there a way to flip face multiple times? I have lots of composite window in the external wall of my model which someone has placed the wrong way round, at the moment I’m just flipping one window at a time.
View 4 Replies View RelatedFor face based family, if I insert it on the Floor, the Front of family will face South.
If I insert it on the ceiling, the Front of family will face North For ceiling based family
If I insert it on the ceiling, the Front of family will face south. Why face based family faces differently?
Calculation of the double face of a wall,
I’m wondering if there is a way to calculate the area of double face of a given wall. For exam, say that we have a wall of 4x4x0.1 meter then the area of one face is 16m2 while the double face is 32m2. Does the Revit calculate the double face of a given wall?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I need to snap witness lines to the core face (face of stud) and not the center of the wall or the face of sheet rock.
View 6 Replies View RelatedIs there a way to hide the lines between areas created via the split face tool? If not, my end goal is to have an area on a surface appear a different color than the surrounding area, with no lines between. The surface is the face of an extrusion in an in-place family.
Revit 2009
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
