Revit :: Graphic Display Of Demolished Or Temporary Non-Structural Elements
Sep 27, 2012
how to change the demolished and temporary appearances of non-structural elements such as railiings, plumbing fixtures etc?It is straigh forward to use phase overides to change the appearance of Walls etc that are either demolished or temporary, but however you change these appearances non structural elements stubbornly remain with a dotted blue outline. I want demolished railings and other non-structural elements to appear with a red hidden line style but have been unable to find out how this can done.
View 2 Replies
ADVERTISEMENT
Aug 27, 2009
How do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies
View Related
Oct 31, 2013
I've inserted walls etc in the "Existing" phase.
How do I show them demolished?
In the "New Construction" phase do I need new wall types?
View 2 Replies
View Related
Apr 2, 2013
When I use the demolish tool on walls, the room region is treated as though the wall is deleted and I get a warning. It changes the room boundries to the closest wall containment.
View 2 Replies
View Related
Feb 8, 2012
I've created a small group of concrete reinforcing detail components that have graphic overrides to change solid black to solid grey. When I copy the objects or place new groups made from the objects, the graphic overrides reset to original all black.
Is there anyway to get the graphic overrides, which are embedded in the group, to copy into new intances of the group so that I don't have to "undo group" and apply new graphic overrides?
View 2 Replies
View Related
Jan 26, 2012
How do you make both the Plan and Plan Low Detail both show in bold as being current in the display properties of a structural member?
View 3 Replies
View Related
Jan 18, 2013
I need to mark an area that will be filled with equipment in the future. I ned this area to come up in an interference check.
I have created a mass to represent the area but you can't clash a mass. What object I could use to represent the area but can be clashed
View 2 Replies
View Related
Nov 5, 2013
I am using Revit 2014. My temporary dimensions do not show. When they do, they only show on one side. I have gone to Manage>Additional Settings>Temporary Dimensions, and tried the different options. It is making it very difficult to place things right now. Is there an all on button I can push? I have also tried closing and re-opening the file, turning off the computer, etc. They were available for use yesterday morning and have not worked since.
View 3 Replies
View Related
Jun 6, 2013
I'm placing lighting fixtures in an RCP, and after I place the light and select it, I only get temp dims in the vertical direction on screen, not the horizontal. Before I click to locate the object, the temp dims in both directions show up, but as soon as I click to place, only one tmep dim shows up.
If I place an aligned dimension from a wall face to the center of the light, and then selct the light, the dimension is not activated to adjust the distance. If I want to move the light, I have to drag it - I cannot input the distance into the dimension.
This makes trying to center a light in a room, or a set distance froma wall, next to impossible and extremely annoying and ecessively time comsuming.
View 1 Replies
View Related
Jan 25, 2012
When I place an aligned dimension along a wall in plan view and then select the wall, the temporary dimension does not appear to allow me to resize the wall.
View 1 Replies
View Related
Oct 1, 2012
Can Temporary Dimensions be turned off and on with a setting.
View 5 Replies
View Related
Oct 25, 2011
Is there any way to set the font size for the temporary dimensions? I am having a hard time trying to read the numbers on screen.
View 1 Replies
View Related
Dec 23, 2013
I was following a tutorial when he created a structural plan where he'd place his footings. when i tried it on my Revit Architecture 2014, i found out that i didn't have that feature. is there any way i can turn it on?
i'm not sure if he's using revit architecture because he just refers to it as Revit 2014. i made a floor plan below the 0 mark but things will be tidier if i could make structural plan views.
View 2 Replies
View Related
Apr 8, 2013
In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies
View Related
Jul 15, 2012
I am having trouble creating my own column and beam
structural column schedule
structural framing schedule
i do not know the settings to be ticked for me to create the schedules and make them appear after i create new scheduling...
also i want to know how the graphical column and beam works...
then setting the level in the schedule to make them reflect instead of using the comments section...
Attach here is a screenshot of the levels...
View 3 Replies
View Related
Apr 12, 2012
I am doing the structural frame of a house with curved walls and I needed to use the Model in Place command to create a curve shaped column. I defined it's category as Structural Column, but it takes the fill pattern of the wall. When I isolate the column, it has the same fill pattern as the column from the library. I need that the column will be displayed as the other structural column.
View 1 Replies
View Related
Feb 22, 2013
How can I switch the orientation of a structural system placed on a tilted face. In other words, I have framing that snaps to the underside, and I need it flipped to the topside of the face.
View 5 Replies
View Related
Feb 28, 2014
Structural columns are exported as blocks to DWG, even if I have checked the "Always export as geometry" -box in the column family.
View 6 Replies
View Related
Jun 29, 2012
We are using structural steel framing familiies which are sloping in section. Where the view range cuts, the framing does not and the entire member is visible including above the cut plane.
The members are set to cut in plan in "Visiilbity Settings." The view is set to "Fine."
View 6 Replies
View Related
Apr 10, 2012
I working on a project in Revit Architecture and I have the Mechanical (MEP) and Structural (Structure) models linked into my model. I need to reference a detail in the structural model/sheet set. Is there a way to do that without creating a false callout tag with linework?
View 1 Replies
View Related
Nov 2, 2012
1) Why structural columns don't show up in architectural plans. The only way I can see to coordinate the structure with the architectural elements is to use structural plans.
2) How to make structural columns visible in architectural plans? I've tried the visibility graphics but everything seems to be turned on by default.
View 9 Replies
View Related
Jul 25, 2013
I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies
View Related
May 27, 2013
Revit Architecture 2014? I've been trying to use the structural beam system, but when I select the joist I cannot select the start/end extension in the properties dialog box. I would like to know why is that?
View 1 Replies
View Related
May 17, 2009
I installed the trial version of Photoshop CS4. I have, however, a strange problem. All images are displayed like in my uploaded picture.
I am sure that my graphic driver has the latest updates, and I have never encountert any problem with my system or with previous versions of Photoshop. What's going on here. My color profile is at default (North Am. General Purposes) and the Color managment is turned off.
View 9 Replies
View Related
Jan 3, 2013
How do I delete temporary files of adobe photoshop elements 8 from my computer before setup?
View 1 Replies
View Related
Aug 8, 2013
I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies
View Related
Nov 1, 2012
Quick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
View 1 Replies
View Related
Nov 3, 2012
I'm using Photoshop Elements 11 Organizer and Adobe Bridge CS6 concurrently. If I have Bridge open to the same folder as PSE Organizer and I do an "Add captions ..." operation to a group of files selected in the Organizer, then there is a very good chance that PSE Organizer will rename one or more files to OriginalFileName_edTMP-1.extension and leave the renamed file in the directory rather than completing the update and returning the file(s) to their original name. In most cases my original files are Nikon .nef files with .xmp sidecar files, but I've also seen this happen with .psd files. The .nef files are generally large, averaging 35 Mb per .nef image and the .psd files are usually over 100 Mb. If PSE Organizer and Bridge are open to different folders then Organizer does not leave the renamed file. logical threading error in PSE Organizer where it does not consider that another application may be monitoring the folder and also opening the files, which is what Bridge does when it discovers that a file has changed (the addition of a caption changes the file contents.) This was also a defect in PSE Organizer 10.
View 3 Replies
View Related
May 28, 2013
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies
View Related
Feb 17, 2014
Is it possible to make the graphic represention of a component in a schedule (make a legend component representation a parameter) or use legends dynamically. I would like to schedule all the casework with quantities of each component. But the current schedule has a graphic representation next to the quantities but it is not in revit and the quanties are determined manually by counting them. I know there is a add on you can purchase to create dynamic legends but is there a way to do this directly in Revit?
View 1 Replies
View Related
Jun 3, 2013
Any luck in creating a graphic bar scale to place on your sheets or in your drawings.
View 6 Replies
View Related
