Revit :: Temporary Dimensions Does Not Appear To Resize Wall
Jan 25, 2012When I place an aligned dimension along a wall in plan view and then select the wall, the temporary dimension does not appear to allow me to resize the wall.
View 1 Replies
ADVERTISEMENT
Revit :: Temporary Dimensions Do Not Show?
Nov 5, 2013I am using Revit 2014. My temporary dimensions do not show. When they do, they only show on one side. I have gone to Manage>Additional Settings>Temporary Dimensions, and tried the different options. It is making it very difficult to place things right now. Is there an all on button I can push? I have also tried closing and re-opening the file, turning off the computer, etc. They were available for use yesterday morning and have not worked since.
View 3 Replies View RelatedRevit :: Temporary Dimensions Not Showing On Both Direction?
Jun 6, 2013I'm placing lighting fixtures in an RCP, and after I place the light and select it, I only get temp dims in the vertical direction on screen, not the horizontal. Before I click to locate the object, the temp dims in both directions show up, but as soon as I click to place, only one tmep dim shows up.
If I place an aligned dimension from a wall face to the center of the light, and then selct the light, the dimension is not activated to adjust the distance. If I want to move the light, I have to drag it - I cannot input the distance into the dimension.
This makes trying to center a light in a room, or a set distance froma wall, next to impossible and extremely annoying and ecessively time comsuming.
Revit :: Setting Temporary Dimensions To Be Turned Off Or On
Oct 1, 2012Can Temporary Dimensions be turned off and on with a setting.
View 5 Replies View RelatedRevit :: Any Way To Set Font Size For Temporary Dimensions?
Oct 25, 2011Is there any way to set the font size for the temporary dimensions? I am having a hard time trying to read the numbers on screen.
View 1 Replies View RelatedRevit :: Wall Placement And Temp Dimensions?
Dec 16, 2011I am sorta of new to Revit. I have been using it off and on for about 3 years and I have one burning question. What and how does Revit determine where the temp dimension is based off of when you are placing new walls? I have had the temp dimension jump all the way across a plan to find a wall that I drew 3-4 hours ago and has no relevance to the current wall I am drawing. The space I am currently on has a geometric relationship to the walls around it, not to a partition wall 200 feet away with no relationship to the current space. Yes I understand the building as a whole has a relationship to all parts within, but I think you get the drift.
View 1 Replies View RelatedRevit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedRevit :: Bulkhead Wall Join Skews Bottom Of Existing Wall
Jul 25, 2013I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
Revit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall
Dec 4, 2012I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRevit :: How To Cut Red Part Of Wall 1 / Hole In Wall 2 By Blue Rectangle
Nov 27, 2011Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
Revit :: Clashing Temporary Object?
Jan 18, 2013I need to mark an area that will be filled with equipment in the future. I ned this area to come up in an interference check.
I have created a mass to represent the area but you can't clash a mass. What object I could use to represent the area but can be clashed
Revit :: Changing Length Of A Wall And Wall Type?
Oct 31, 2013When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
Revit :: Arched Hole In Wall And Wall Height
Apr 16, 2013I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
Revit :: Adding Wall Sweeps To Wall Profile?
Jul 29, 2011I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View RelatedRevit :: Drag Wall End To Edge Of Wall
Apr 7, 2013“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
Revit :: Graphic Display Of Demolished Or Temporary Non-Structural Elements
Sep 27, 2012how to change the demolished and temporary appearances of non-structural elements such as railiings, plumbing fixtures etc?It is straigh forward to use phase overides to change the appearance of Walls etc that are either demolished or temporary, but however you change these appearances non structural elements stubbornly remain with a dotted blue outline. I want demolished railings and other non-structural elements to appear with a red hidden line style but have been unable to find out how this can done.
View 2 Replies View RelatedPhotoshop :: Crop - Keep Dimensions But No Resize
Jan 3, 2008I want to use the crop tool to edit my image - I want the crop tool to maintain the image dimensions (i.e. 4x6), BUT I don't want the image to be resampled. All I see with the crop tool is that if I want the size to be constrained, it makes me pick a specific size, not an aspect ratio.
For example, if I say 4 inches by 6 inches and crop a very small section of my image, it will crop it, but then resample it and blow it up to a 4 inch by 6 inch photo. I really just want the ratio to be maintained. 4x6.
Paint Shop Pro :: Page Dimensions Resize In X3
Jun 5, 2011I am using PaintShop Pro Photo X3 build 13.2.1.20 with an HP Deskjet 6940 printer running on a 64-bit Windows 7 Home Premium system. If I follow the following workflow an apparent problem is revealed:
1. Open image file and go to File | Print...
2. Under Size/Position choose Fit to Page and note the image size details
3. Click on Properties
4. Go to the Paper/Quality tab
5. Change the paper size to A5, for example
6. Click OK
7. Note the image size details - they have not changed from those noted in 2
8. Click on Properties
9. Click on OK
10. The image has now been resized
11. Click on Properties
12. Choose a different paper size
13. Click OK
14. The image has not been resized from the dimensions in 10
15. Click on Properties
16. Click on OK
17. The image has been resized
Lightroom :: How To Resize A Photo To Actual Dimensions
Jun 21, 2012I am creating a photo book using LR 4.1 and BookSmart (so that I can design my own layouts which I can't do in the LR Book module). Everything is working fine except for resizing to fit BookSmart photo containers. In LR it appears that I can only resize to an aspect ratio and not to the actual pixels. For example, I have a custom size of 5.7 x 4, which LR crops to the aspect but retains a high pixel count (4798 x 3367 for example). The optimal size for the BookSmart container is 1710 x 1200 pixels. My understanding is the BookSmart downsamples the image to fit the pixel dimensions of its container. I have read that for best results you should have your photos in the optimal size to begin with, which avoids the downsampling. In LR I can't see any other way of doing this except in the Print module, which does not connect back to my collection in Publish Services. I am hoping to avoid having to edit each photo (over 400) in Photoshop just so that the size (dimensions and pixels) is optimal for the BookSmart photo containers. Am I missing something in LR that would allow me to set the size correctly for BookSmart?
View 8 Replies View RelatedPhotoshop Elements :: Resize Photo And Will Not Edit Pixel Dimensions?
Jan 15, 2014Trying to resize photo and photoshop will not let me edit the pixel dimensions.
View 1 Replies View RelatedRevit :: No Wall Gap Line?
Apr 4, 2013Is there anyway no wall gap line between floor when I copy 1st floor walls to 2nd floor. Not to use "Join geometry" & Line work: invisible line" tools? See attached picture.
View 3 Replies View RelatedRevit :: Why Can't See Wall Sconces
Dec 12, 2013Short story is I made a wall sconce from scratch but I can't see the symbolic lines in my ceiling plan in the project.
I needed a linear wall sconce for a client presentation based on one of theirs already installed. The manufacturer doesn't provide BIM for this model so I had make my own. I haven't bothered with photometrics. At this point all I need is a placeholder for the ceiling plan and a 3D model for a hidden line view. I used the wall based light fixture family. There was a plane elevation but no apparent parameter so created one and called it 'mounting height'. After about ten minutes of modeling (and over an hour of tedious aligning, dimensioning and locking of the sketches to keep the model from distorting with changes in wall thickness) I opened the ceiling reference level plan and drew some symbolic lines to represent the fixture on the ceiling plan in my project.
Here's what happened.
The symbolic lines for the CPRL (Ceiling plan in the family editor) are also visible in the FPRL. I don't know why this is and there doesn't appear to be a way to hide them in just one plan. I suspect it's because both are at the same height (the reference level.) I tried changing the working plane before drawing the symbol lines to another plane above the reference level and out of its view range but it had no effect. I can still see them in the floor plan.When I loaded it into the project nothing appeared and I got the message about 'no elements are visible because yada yada'. The symbolic lines didn't show up at all. I checked the detail level and that wasn't it. As far as I can tell the view range for the CPRL and the RCP in my project are the same. They don't show up in the project floor plan either. The sconce is visible in 3D views so it's definitely in there. I tried monkeying with the height of the symbolic lines like I stated in part 1. but it had no effect on there visibility. Symbol lines are visible in other families so it can't be an issue with visibility overides.In my project I noticed there's a parameter for the fixture called 'Elevation'. Changing it moved the fixture up and down on the wall. Changing the 'mounting height' parameter in the project had no effect! This parameter worked fine in the family editor. Playing with the 'Elevation' parameter and the cut plane elevation brought the symbolic lines into view. Apparently the symbolic lines are only visible when the cut line is passing through the sconce. Unfortunately my sconce needs to be mounted at 6 ft and my cut plane is at 7'2 to avoid cutting doors and windows. How do get these symbolic lines to display?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Revit :: Turn Off A Certain Wall?
Jun 8, 2012I want to turn off a metal stud wall but leave visible the pre-cast wall.
View 5 Replies View RelatedRevit :: Getting A Subcategory For Wall
Nov 20, 2006revit should give a sub category for wall so it easy to on and off using visibility and give different line color in the object style
View 2 Replies View RelatedRevit :: Offset Of Exterior Wall
Feb 17, 2013In any event, how do does one use the numerical offset to offset an exterior wall and achieve the new offset wall to be in the correct orientation and location, i.e. exterior brick on the exterior and interior gypsum board on the interior?
View 2 Replies View RelatedRevit :: How To Model Wavy Wall
Oct 24, 2013I need to model a wavy wall in Revit. See attached.
Revit 2014
Revit :: Slope The Bottom Of The Wall?
Dec 21, 2012Is there a way to slope the bottom of the wall. See attached x sec.
View 2 Replies View RelatedRevit :: Can't Create Wall By Face
Mar 26, 2013I am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
Revit :: How To Have Different Colors For Different Wall Faces
Dec 2, 2013how to have different colors for different wall faces? Like all have a plaster finish on the external side, but the colors are different, but when I try to change the color of the external finish, it changes it for all the walls.
View 5 Replies View RelatedRevit :: How To Show A Wall Demolished
Oct 31, 2013I've inserted walls etc in the "Existing" phase.
How do I show them demolished?
In the "New Construction" phase do I need new wall types?
Revit :: How To Change The Wall Assembly
Jan 17, 2013I am trying to change the wall assembly of my foundations (getting rid of a layer of EIFS) and it won't let me delete the layer or change the width (although I can change it into an airbarier). Is there any way to control what parts of the wall are locked in the "edit assembly" window?
I am very new to Revit and am using a student version, I'm nt sure if that changes things.