I have a user that when adding a sliding window has Revit crash on her. This is happening several times during the day. There will be over 80 of these windows. Her workstation has plenty of grunt, Xeon Quad core, 12Gb RAM etc. I have attached the journal file that shows the crash.
View 1 Repliesi have atocad 2011 installed on my computer (64 bit), a HP Pavilion p6370nl desktop pc, and also have a new videocart: nvidea gt 640, but if start atocad, it starts, and close then. what to do? i already have reinstalled it and also repaired it so...
View 9 Replies View RelatedI tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
We have a fairly large project set to print tomorrow. However, one of our sheets causes a crash every time we try to print it. Actually, it's not sheet specific. Anytime we try to print a certain portion of of the building on any sheet, it crashes the project. We have two separate plan views of the same area created on separate sheets and each one causes the project to crash.
I've audited the filed, recreated the views and re-placed them on sheets, but to no avail. Same result. On a similar topic, there were some corrupt elements (doors) in the file that caused the project to crash anytime I tried to delete them or change the swing.
Ever since I've installed PS CC it has crashed several times per day. I've installed 14.1.2, and the crashes still persist.
The viewport always fails to rerender at some point when I'm zooming in or out or have changed layers. The scenerios differ, but it always has to do with a needed graphics refresh. On some occasions the crash dialog will not appear until I attempt to save (knowing that's already crashed, but hoping...).
I have used Photoshop since (I believe) version 2. CC is the worst release I have ever seen.
AMD Phenom II X4 945 Processort 3.00 GHz
8.00 GB
64-bit Win 7
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 14.1.2.427
Application Timestamp: 524002c6
Fault Module Name: Photoshop.exe
[code]...
We have heard from few users that there is a crash on launch after the latest Illustrator update 17.0.1 on WINDOWS. We need to debug this issue and to isolate this. Any user who is encountering this on windows can join the connect session: [URL]
View 2 Replies View RelatedI have Adobe Premier Pro CC on a laptop windows 8.1.
I can open the software without problem but when i want to create a new projet, open a projet, import media (all actions which needed to use the window's browser) the soft crash and a "adobe premiere pro has stopped working" pop up appears.
I have the follow report in "C:ProgramDataMicrosoftWindowsWERReportArchiveAppCrash_Adobe PremiereP_c3d8aff034e6134d452e86f0b46eb49124ae68d4_bdc6adc1_9321fcde Report.wer" is attached
I've installed the entire CS6 Creative Suite on a new Windows 8 Machine. Launcing any of the applications other than Acrobat 10 causes a crash. Windows 8 and the Nvidia GTX670 are all up to date. Crash reports for Photshop and Illustrator are as follows:
Version=1
EventType=APPCRASH
EventTime=130049840096886225
ReportType=2
Consent=1
UploadTime=130049840098761275
ReportIdentifier=37a6f1e2-7397-11e2-bea3-9cb70dad8ba7
IntegratorReportIdentifier=37a6f1e1-7397-11e2-bea3-9cb70dad8ba7
NsAppName=Photoshop.exe
Response.BucketId=23ed3b6a404a94083e867a3519a4b84e
[code]....
When I add "Document Settings" to the quick acess toobar it causes Inventor to Crash when I close the active .ipt, idw, etc.
View 6 Replies View RelatedI have been experiencing an intermittent crash of Photoshop CS5 in Windows 7 when saving. I cannot effectively reproduce the problem and am having difficulty diagnosing the cause of the it. I have updated Photoshop to 12.0.4.0 and still experience the crash.
Hardware:
AMD Phenom II X4 965 3.4GHz
8GB RAM
AMD Radeon HD 5450
Software:
Windows 7 Home Premium Version 6.1 (Build 7601: Service Pack 1)
Photoshop CS5 12.0.4 x64
WARNING/ Windows update crash X6
View 14 Replies View RelatedAfter an AutoCAD/Windows crash, I reboot. The system begins to load Windows (Win 7 splash), then the screen goes blank and a white Windows cursor appears -- nothing more; no desktop or taskbar.
Control-Alt-Del does nothing, however, the HDD light continues to flash as if it is continuing to boot. The same thing happens when I boot in Safe Mode (except cursor is larger due to different resolution).
I can boot from bootable CD and everything works fine. HDD scan and memtest both pass. I formatted the drive and reinstalled Windows and AutoCAD and everything works fine. However, two days later, the same exact problem occurred on the second of five workstations.
Details:
Win 7 Professional 64bit
MS Office Home and Business (with Outlook configured for IMAP)
i7 processor, 6GB ECC RAM, Nvidia Quadro 600 w/1GB RAM.
AutoCAD 2013 was originally loaded from a trial version, then purchased license key installed.We are using Xref on a file server and opening drawing on a file server across a ethernet Gbit lan.
Here is the end of the journal file:
'***********************************************************
'CT [Modifier la nomenclature ou les quantités]:
'{1} Dialog_Revit_ScheduleBar_a
'{458} Dialog_Revit_ScheduleBar_b
'{458} Dialog_Revit_ScheduleBar_c
'{458} Dialog_Revit_ScheduleBar_d
'{458} Dialog_Revit_ScheduleBar_e
[code]....
I have an SAT file that I inserted into a Conceptual Mass Family and then loaded into a Revit project. I have changed the name of the object in the Object Styles/Imported Objects dialog and assigned a unique material to it as well.
When I load it into the project its generally fine, sections/plans/elevations/section boxes work fine. When I try to update the material settings or the material it retains the original material settings. After the second attempt at assigning a new material: Crash Error Unexpected something or other Shut down.
I opened the original Mass famiily and updated the material shading once and it worked fine. I did it again and: Crash Error Unexpected something or other Shut down.
This is not my first time to use this process. Probably the fiftieth time. However it is the first time I've used it in 2014 with the new(really old) improved (fixed) materials dialog.
Is there a bug or known issue in 14 vs. 13. Am I missing a hotfix? It works on 13.
I keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
this is a pretty newb question, but how do you open a current layer in a photoshop file into a new window so that all the dimensions of the new window will automatically fit tightly around that that layer? is this possible?
I'm trying to add the new layers into new windows so i can automatically save each layer image as a jpeg. I'm doing this so i can load each image separately in flash and do cool tricks with it.
how to fix an issue I have of autocad hitting 100% cpu? It's mainly when copying. It's used on server 2008 r2 by multiple users through xenapp.
View 2 Replies View RelatedI recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
I have downloaded AutoCAD 2012 and when I try to open it my computer automatically shuts off without even openig AutoCAD. I tried downloading the newest version of AutoCAD 2013 and it does the same thing. Inventor fusion seems to open and work properly but not AutoCAD.
View 1 Replies View RelatedIm trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies View RelatedI try to load AutoCAD 2010 on windows 7 but it keeps on failing Language Pack - English failed installation aborted, Result 1624 so it rolls back and doesn't install.
View 9 Replies View RelatedHad a system crash. I had Norton 360 using a slave HD as my automatic backup source. To reinstall windows, master HD was overwritten. I thenfound out Norton 360 didn't save my autocad files to the slave HD. Their definition of "other files" didn't cover dwg files unless you did an extremely detailed setup process, which, was not in the Norton instructions. Anyways, local computer service was able to recover about 60% of the "lost" autocad files.
Of those recovered files, about 60% will not open up. Only get a message "not a valid file" The file details show its an autocad file, its size, and the last date of revison.
AutoCAD 2010 civil 3D.
Main issue is frequent crashes of the AutoCAD software. Sometimes 10-12 time's in a day. Unfortunately their are no error messages, and I have yet to see any pattern in when and how it crashes.
The problems I can see are the workspace, and process memory of my system. The workspace does not load correctly. The Ribbon shows multiples of the every tab at least twice. All tabs show the commands but not the pictures associated with the commands. CUIload shows correct workspaces.
Second note is that my system runs the same .dwg file's at 2/3 the processing memory than any other identical systems I run AutoCAD on.
Third, through my digging and attempted solutions I found that the AcSignCore_.dll file was missing.
I have: re-installed 3D twice, updated graphics drivers on my system and run open close save hotfix as well as AutoCAD2010 update 2 for 64 bit system.
When creating a PDF from a DWG AutoCAD LT 2010 (running on windows 7) I get the following error.
unhandled access violation reading 0x6a162be0 exception at 6a162be0h
This only happens the second time I create a PDF - the first time it is very quick and there are no errors
I have tried a repair and a reinstall but am still having the same issue.
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
My working company currently practicing multiple user per pc. The autocad can run smoothly during the 1st time windows user account setup. But later on, after few days it start crash. The app will load and run but just for doing simple thing such draw lines, polilines n such. When i want to access the task panel, it crashed. Same if wan to load application, lisp etc. It only work fine under the user account which it is installed in. My user account have the administrative privilege and i'm running Windows XP platform (x32).
View 1 Replies View Relatedmy tool palette causes a systematic crash at startup .
is there a way to launch without opening toolpalettes .?
Dev env: AutoCAD 2012, VS 2010, ObjectARX.Net 2012
A simple windows form command dll to test within the VS2012 + AutoCAD 2012
Bug: when debugging with VS2012, the first command runs fine and I can debug it with breakpoints etc etc. However, after the first debugging session, if I try "File"->"Open" or "New", file dialog will popup and then my AutoCAD 2012 crashs.
It won't happen if I compiled the dll, and load directly from AutoCAD independantly running instance.
When i attempt to change any value of any dimension style, i am no longer given the 'Ok' option to finish and close the dialogue box. Instead i get an error code.
I recall that it arose when using civil 3D 2013 (which i've since uninstalled) and has continued into AutoCAD 2012 (installed post civil 3D 2013 uninstall).
I have currently imported .sat files into revit and positioned them to where I want, but is it possible to add a face color to the models?
View 3 Replies View RelatedWe have a family that errors when certain values are hit. Its realated to Automatic Sketch Dimension reassociating with work planes when two workplans over lap... Anyway, the QA team knows about this.
The problem I have is that I have an IF statement to trigger an generic error message when these two rare conditions are met. I would rather a pop up window explaining what thy can not do. "Position of legs from ends can not equal half total length" and an OK button.
Is there a "say" style command for revit formulas?