Photoshop :: Pantone Solid System
Jan 19, 2005
I have same question for pantone Solid system, I am a Chinese boy, Work by photoshop cs use spot channel.
1> the "Pantone Solid system" have 1114 color,204 Metallic,126 Pastel.yes or no?
2> the "Pantone Formula guide-coated" have 1114 color only have 14 Metallic,why?
3> the "Pantone Solid to process coated" Solid system before use spot channel have CMYK PRINT OR SPOT PRINT,why?
4> what the "Pantone Film guide" and "Pantone Foil guide" and "Pantone Foil stamping guide".
View 2 Replies
ADVERTISEMENT
Aug 19, 2004
I know that I am to click on the color palette, (which brings up the "color picker"), then I click on Custom, which brings up Custom Colors.....
this is where I get lost, I don't know what to do next to find the correct PMS color.
If anyone can help me, I would appreciate it so much! I just recently got a job at an advertising company, and it crucial that I know this.
I am fairly new to Photoshop, so if you could please keep the terminology simple.
View 6 Replies
View Related
Jun 9, 2013
I am trying to make business cards in Adobe Illustrator using the Pantone Color System. In my logo, the middle circle is a dark grey: C20 Y20 M20 K80. I can't find a suitable Pantone grey that is this dark. Pantone 425U is too light. Also, which Pantone Black is the darkest?
View 21 Replies
View Related
Aug 12, 2013
I'm trying to include PMS 2077C in an Illustrator CS6 file. For some reason, when I search 2077 in the Pantone Solid Coated find field, nothing comes up.
View 2 Replies
View Related
Feb 11, 2014
I have a Pantone + Solid coated book that has 336 new colors in the back. Specifically pms 2028 C. The problem is when I try to find it in the PMS charts in Illi CS6 or PS CS6, those 336 new colors are not in my Pantone + Solid coated charts. I ran the adobe updates and it updated what it needed but I'm still unable to find it. Am I looking in the wrong chart? The name matches that of my PMS book so it just doesn't make sense. I scroll through the Illi chart and also try to use the "find" section.
View 1 Replies
View Related
Jan 2, 2013
I have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies
View Related
Mar 19, 2012
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
 (setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
View 4 Replies
View Related
Sep 19, 2012
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
View 4 Replies
View Related
Jun 18, 2013
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
View 9 Replies
View Related
Aug 12, 2013
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Jul 10, 2013
Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies
View Related
Nov 18, 2012
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
View 9 Replies
View Related
Dec 13, 2012
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies
View Related
Nov 7, 2012
I want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies
View Related
Dec 1, 2006
How can i convert some solid bodies to a single solid.
View 8 Replies
View Related
Nov 30, 2012
i acquired a design bundle inside of which i got over 200 gradients my first question would be who can tell me what exactly a pantone gradient is? and seeing how it's coming up to to christmas i feel like being generous so attached is a screenshots of most of the gradients if you want one, two or maybe even ten lol let me know and i will email them off to you i won't be uploading these to a file sharing site mainly because i don't trust them anyway, if you want any of them let me know which ones you want along with your email in a PM and i'll get them sent off to you asap.
View 1 Replies
View Related
Aug 19, 2003
Why is it that when i choose a Pantone colour from my Pantone book, then go into Photoshop and select the same Pantone colour number, the CMYK breakdown in my book is different to the one that Photoshop tells me?
View 4 Replies
View Related
Apr 9, 2009
My online printing outsource made a postcard containing my image and it came out about 1-1/2 stops too dark. When I questioned this I was advised as follows: "For best prediction of color output on a 4 color offset press, please compare your CMYK percentages with an industry-standard Pantone Process guide.">>This seems strange since a color image will have numerous different percentages of cmyk. I must be missing something. My friend who has the Pantone guide wants me to specify a Pantone number for use in comparing the image. I don't see how this can work for the same reasons (different colors, different percentages).>>The easiest solution I can think of is simply to brighten the image the next time I order postcards from this printer.>>
View 1 Replies
View Related
Mar 14, 2012
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies
View Related
Jan 23, 2013
There is a noticeable difference between color values specified in Pantone books/Color Manager and CS6. For instance, the correct RGB value for Pantone 158 CP should be 228/126/26, whereas Photoshop's RGB value for the same color is 245/127/41.
Â
I have a subscription to Creative Cloud and all applications are up to date. When will this be fixed?
View 16 Replies
View Related
Mar 27, 2013
I have had some trouble since installing Lion and CS6 with colours. A good example is 362 green. It is the client's corporate colour. The swatch book had cmyk values of 70c 0m 100y 9k. So did the swatch selection in InDesign CS4 and earlier OSX. The new values are now 73c 13m 100y 1k. Quite a different colour. On screen and print.
Â
I am tempted just to rename the colour as 'Client X green' and use the old values. I just wonder if I should say "Mr Client, Adobe and Pantone have changed your colour" and not interfere.I have tried using Pantone Bridge selections, but they are different again.
View 9 Replies
View Related
Jan 24, 2005
I've got a couple of questions regarding pantone colour selection.
Which pantone colour palette should I use if i'm to prepare a design for commercial printing; Pantone Solid or Pantone Process?
And when the printers say :"Pantone 185", which palette are they referring to?
View 9 Replies
View Related
Jul 24, 2006
how to find the pantone reference of a colour in either Adobe Illustrator CS2 or Photoshop CS2.
View 1 Replies
View Related
Jan 15, 2008
I have (for example) an object set to spot color PMS 145 C 100% solid in an Adobe Illustrator drawing.
According to my Pantone Color Bridge Coated swatchbook, PMS 145 C "translates" to R 202 G 119 B 0.
BUT, if I "open" that AI file in Photoshop, and eyedropper that spot in the drawing, the RGB "translation" comes in as R 229 G 142 B 26.
I'm using CS2, and with Photoshop Color Settings at the default "North American General Purpose 2" at open time.
If I open the AI file as 300ppi CMYK, the spot color "translates" to the RGB values as above.
If I do this same operation with Photoshop set to open the AI file as 300ppi RGB, the same color eyedrops as R 230 G 143 B 26 (which is close, but not the same).
But NEITHER of these are the same as what Pantone publishes as the "official" equivalent RGB to the Spot color.
Why the discrepancy between Pantone's published equivalent and what Photoshop does?
View 15 Replies
View Related
Mar 23, 2009
I was just told by a printer that I need to convert my clients logo from CMYK to SPOT COLOR PANTONE? Though for the life of me I have never had to do this, I was told it is QUITE a procedure in Photoshop.
View 2 Replies
View Related
Apr 29, 2013
I have a client that would like to include a light pink metallic pantone color in a design. They want a metallic color similar to an existing light pink solid coated pantone color already in the design (image lighter color in mane) but when I look at the pantone metallic color books the colors seem dark (img darker color in mane)Â and there does not seem to be a metallic match for the light pink color.Â
View 5 Replies
View Related
Mar 23, 2012
I receive a psd file, how I can tell if a pantone color is involve when they first create the image.
View 4 Replies
View Related
Feb 26, 2008
I have a simple graphic (not continuous tone). I need to convert the colors in it to their nearest matching Pantone colors. Is there a way to do this in PhotoShop?
View 2 Replies
View Related
Nov 17, 2008
I have a logo that needs to be on a pantone color background at 50% opacity......
View 2 Replies
View Related
