Photoshop :: Converting Colors To Nearest Pantone

Feb 26, 2008

I have a simple graphic (not continuous tone). I need to convert the colors in it to their nearest matching Pantone colors. Is there a way to do this in PhotoShop?

View 2 Replies


ADVERTISEMENT

Illustrator :: Converting Pantone Colors To CMYK Presets?

Jan 8, 2014

I have been trying to convert both Pantone Colors to CMYK and CMYK to Pantones on a few of my projects.  I walk throught the steps but nothing happens.  My counterpart which has CS5.5 also is able to do it both ways just fine.  Is there a pre-set someplace that I need to be aware of? 

View 6 Replies View Related

Photoshop :: Lab Input Colors Rounded To Nearest Full Number

Feb 22, 2012

Is there a setting to not have adobe Photoshop round up or down to the nearest full number? My X-rite scanner reads in the hundreds and I would like more color accuracy.
 
I read here that humans can't see any difference smaller than 1. I disagree, maybe 1 in the L value, but a and b seem to be a little less.

View 1 Replies View Related

Illustrator :: Find Closest Pantone Spot Colors For CMYK Colors?

Mar 21, 2013

Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.

View 4 Replies View Related

GIMP :: Replace Similar Colors With One Nearest Color (2013)

Oct 16, 2013

An image I imported contains an area with quite a few different, yet very similar colors (different shades of the same red). I want to change the complete area to one single red tone. What's the most appropriate approach to this? Especially without loosing the antialiasing at the edges that surround the area.

View 3 Replies View Related

CorelDRAW X5 :: Converting RGB To Pantone?

Nov 4, 2013

I know there is a way to find the Pantone number for an RGB color... How to do this in Corel X5?

View 1 Replies View Related

Photoshop Elements :: How To Access Pantone Colors

Nov 26, 2013

Can I access Pantone colors from photoshop elements 12?  If so, how do I do it? 

View 3 Replies View Related

Photoshop :: Mixing Pantone Colors - Just Like CMYK Channels?

Oct 31, 2013

What I'd like to do [in photoshop] is treat 4 pantone colors just like CMYK channels. What I mean by that is that I would like to replace Cyan, Magenta, Yellow and Black with my own colors [pantone colors] and have them mix and act exactly like those channels. As in, when I open a full color image, and my pantone [or any color] channels or color profile is active, the full color image will react to those colors [with the blending of the colors].
 
Instead of 45% Cyan, 55% Magenta, 83% Yellow, and 2% Black in a given spot, it would be a mix of the 4 chosen colors [example: 45% pantone A, 55% Pantone B, 83% Pantone C, 2% Pantone D].
 
or to put it another way, if I were to color the background in, say, a blue, I would be able to use the "Info" panel to see how much of each pantone color was mixed to create that color. Obviously there would be a limit to the colors I could create based on the pantone colors I select.
 
I don't want to do anything printing wise with this technique. I am looking at it solely as an on screen viewer or perhaps use it in some manner for screen printing.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Converting RGB Values ​​to Pantone Quickly?

Nov 7, 2012

converting RGB values ​​to Pantone quickly.

View 15 Replies View Related

Xara :: Pantone Colors Availability In XD7 Pro

Jul 7, 2011

Just working through a few designs and noticed that quite a few of the Pantone colors don't exist in XD7 Pro so far all six colors i wanted to use are not in the libraries. How to update the Xara Pantone palettes.

View 4 Replies View Related

Illustrator :: How To Get Back Pantone Colors

Dec 18, 2013

I'm using illustrator CS6 but now there are only pantone+ colors in the swatchbook to select. And these are different from the pantone colors. How i will get back the pantone colors?

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Color Management - Converting CMYK To Pantone

Jan 8, 2013

I always use CMYK in my designs and the Pantone color codes for their logo design.  I have never had to convert them before and have searched forums and boards with no luck in finding an easy way to do this.

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Pantone Conversion Tables When Converting To CMYK

Aug 23, 2012

Recently found another bug in X6. This time it is in the Pantone conversion tables when converting to cmyk. I had a job that had been updated over the years and the file was last used in X5. The colour in question was PMS 7406. The file opened fine & was converted to cmyk and sent to the printer unchecked. What could possibly go wrong - this file had been used countless times before without incident. Pantone 7406 breaks down to 18% magenta and 100% yellow (as per Pantone's own specification). X5 converted it to 17% magenta and 100% yellow. Near enough - I'm not going to quibble over 1%. However, opening the X5 file in X6 caused it to use the 'Pantone previous version' colour table (and you don't get any notification that it is doing it). Result is that it now converts the colour to 18% cyan, 24% magenta and 100% yellow. Where the #@**# did it get the cyan from? We are now talking about a completely different color!

It gets worse. If you create a new object in X6 and fill it with PMS 7406 (using the Pantone + colour table) and then convert it to cmyk, you get 6% cyan, 22% magenta and 100% yellow. Again, this is not the correct break down of this colour.  Pantone is a world standard with known conversion to cmyk figures. InDesign can get it right, Illustrator can get it right, then why can't Corel? And how many other Pantone colours are wrong? I have used Draw for 20 years and this is the worst bungle yet (apart from version 4). For a program that tells the world it is a professional program to screw up like this beggars belief.

If we have to check every single Pantone to cmyk conversion against the Pantone specifications, then it just isn't worth using Corel in printing. Add this to the font problems in Font Navigator and the scale error in Barcode Generator and it make X6 pretty much useless in the print industry. Throwing in freebies like fonts, second rate web creators and Photo Paint are not much use when the flagship program is sinking.

View 13 Replies View Related

CorelDRAW X5 :: Change RGB Colors In Image To Pantone?

May 18, 2012

Is there any way to change the RGB colors in an image to Pantone without having to select each individual part of the design? Basically what I am hoping to do is change certain parts of an image that are let's say R:0, G:0, B:0 and change them to Pantone Black C without having to select each section one by one.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Using New Pantone Colors

Jan 4, 2013

I just purchased the new formula guide and digital software manager from Pantone. I have successfully imported the home and fashion colors into Corel Painter, but I am having trouble doing this in CorelDraw. I see nothing on the adobe swatch exchange (.ase) or importing  the new PMS colors.

View 2 Replies View Related

Xara :: Difference Between CMYK And PANTONE Colors

Dec 20, 2011

I am new to designing.

1) What is the difference between CMYK and PANTONE colors?

2) How can I convert CMYK colors to PANTONE in Xara Xtreme PRO 4.0

View 2 Replies View Related

Illustrator :: Determine What Pantone Colors Are Used In Logo?

Mar 21, 2013

I use Adobe Illustrator CS4 and I have a logo (.ai file in CMYK) that uses 2 colors.  I don't know how to convert / find what Pantone colors my logo uses. 

View 10 Replies View Related

Illustrator :: Mesh Gradients Using Pantone Colors

Mar 18, 2013

I'm struggling to create gradients for screen printing purposes. The artwork will be printed on 12oz canvas using 3-4 pantone spot colors.
 
1) if I fill an object with a single Pantone color, create a mesh gradient from it using a variety of different opacity settings, say 100%, 50% and 25%, then play around with the mesh handles to produce a pleasant, mixed background, will a gradient of this type work for screen printing? I don't know if a gradient of this type will require halftones, as a linear or radial gradient would.
 
2) it's my understanding that when you prepare artwork for screen printing using spot colors, each color should be on its own layer. In an attempt to add highlights or shadows to an object, if I copy an object and paste it in front of itself, then apply a gradient using another Pantone spot color, say Pantone Process Black(100% to 0% opacity), does it matter what the blending mode is? Obviously you'll get different results based on the option you choose, but again, I'm concerned here only with screen printing. I can then place the gradient on the Black layer.
 
The problem is that I'm familiar with off-set printing, and apparently gradients have to be converted into halftones when screen printing, so I'm trying to figure out the best way of creating shadows and highlights.

View 12 Replies View Related

CorelDRAW Graphics Suite X6 :: Pantone Colors When Saving Down To X4

Aug 31, 2012

I just upgraded to X6 from X4 about 2 weeks ago. I do all of my work in spot colors since i'm in the screen printing industry. Since not all of my clients have upgraded I still have to save down my work to X4. This is where the problem begins. When its been saved down it's creating a LOT of extra colors in the print separations. It's a lot of the same color. For instance I used black, Pantone Rhodamine Red and Pantone Yellow...when I save it down to X4 it's giving me 2 blacks, 3 Rhodamine Reds and about 10 Pantone Yellows. When I export to pdf and open in Corel X4 it doesn't do this...only when I save down. I don't want to have to export and open each time I have to send a file.

View 14 Replies View Related

Illustrator :: Two Files / Same Pantone Color - Onscreen Looks Like Two Different Colors?

Jun 24, 2011

Recently we have been having this issue at work, We have a line of packaging that uses the same pantone color (375 C). When we go to create a new document and use that same pantone the color onscreen looks more saturated then its predecessor. The only think I can think of is that I've upgrade to the pantone plus system but have since uninstalled and reinstalled the old color books. Both documents are in CMYK color space and both use the same ICC profile. I know it wont appear this way when printed but we make a lot of PDFs for approvals and the colors come out more saturated in the PDF as well. See sample image below.

View 14 Replies View Related

Illustrator :: Can't Find Pantone Colors From 7548 To 8002

Sep 27, 2012

I have my Pantone Solid Coated palette open in Illustrator but can't find the Pantone colors from 7548 to 8002 (they actually jump from 7547 to 8003, and I want to use 7737), my list is sorted by name.
 
The only thing I think might be the problem is that these have a transparant White value, and all the rest hasn't so maybe it's in another swatch ?

View 8 Replies View Related

Illustrator :: Cannot Find New PMS Colors Pantone And Solid Coated Charts

Feb 11, 2014

I have a Pantone + Solid coated book that has 336 new colors in the back. Specifically pms 2028 C. The problem is when I try to find it in the PMS charts in Illi CS6 or PS CS6, those 336 new colors are not in my Pantone + Solid coated charts. I ran the adobe updates and it updated what it needed but I'm still unable to find it. Am I looking in the wrong chart? The name matches that of my PMS book so it just doesn't make sense. I scroll through the Illi chart and also try to use the "find" section.

View 1 Replies View Related

Illustrator :: Unnamed Global Colors From Pantone Color Manager ASE File?

Dec 23, 2013

I am not sure, if this -- or something similar -- was answered before but I couldn't find any suitable thread/message/...
 
First of all some system information:
* imac running OSX 10.8.x and macbook running OSX 10.9.1
* Illustrator CC
* Pantone Color Manager
 
I am trying to use the Pantone Fashion and Home / Paper color library provided by the Pantone Color Manager, specifically for using the Radiant Ochid 18-3224 TPX (Color of the Year 2014). I saved the named library to a *.ase file and opened it in Ai. From the number of colors I guess, that all colors are imported but I can't find the 18-3224. BUT there are lots of "Unnamed Global Colors" with some of them wich might be the one in question. Using 'xxd pantone.ase' in the terminal I can find at least the name "Radiant Orchid 18-3224 TPX", which means, that it is saved in the given file.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Adding Dots From Post Script Options To PANTONE Colors

Jul 29, 2011

I work in a print shop. We do a lot of work with a printing press as well as our digital machines. Whenever we design something digitally that has grayed areas or logos, and we want to print it using our press, we need to make sure the shaded areas have "dots" so that the ink from the press will spread evenly.

In CorelDRAW X4, I used to to have it sent to the general PANTONE uncoated palette. After selecting the gray area, I would double click the color box at the bottom right, bringing up the fill window. From here, I selected the Options drop down menu, then PostScript Options. Here I could set the dots and the frequency.

Now that we've updated to CorelDRAW X5, the palette options are quite different. I want to have one centralized PANTONE unocated set that stays for everything I work in. And the big problem, is that when I do find a good gray to use (after clicking through way too many choices), the PostScript Options is grayed out and can't be clicked on.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Export To EPS Makes Pantone Colors Black Or Gray Scale

Dec 1, 2011

Hopefully my title gets the point across.  I've read numerous threads on here where people seem to have the same issue, but I've yet to discover a solution.

I recently bought a new pc and installed Corel Draw X5.  When I export to eps and open the eps in Corel, the Pantone colors appear nearly black.  This is also true for my clients, although I'm not sure what program they are using to open the eps. 

It is worth mentioning that on my old PC I did not have this problem. EPS files I exported from Corel Draw X5 were fine. I could export eps files containing Pantone colors, and the Pantone colors would be there when I opened the eps file.

The settings I'm using under export to eps dialogue are the exact same settings I was using before:

Output colors as Native and PostScript 3.

I am running Windows 7 Home Premium SP1, and CorelDraw X5 15.2.0.695

View 12 Replies View Related

Photoshop :: Converting To Different Colors Works?

Oct 8, 2012

I'm trying to understand how converting to different color profiles within Photoshop works.
 
What I'm trying to understand is why, when I have a document saved in with an embedded color profile of "Adobe RGB (1998)", when I *convert* the color profile to "Adobe RGB (1998)" (the same profile) the colors change dramatically. If I am converting to the same color profile, shouldn't the colors remain the same, and not change?

View 19 Replies View Related

Photoshop :: Converting Photo To Just Three Or Four Colors

Aug 3, 2006

I am trying to convert a full color photograph into an image with just a few colors.

The purpose is to allow the photo to be embroided with color stitching. I envisage the final result will be a diagramatic representation of the photo.

Is anyone familiar with the photoshop tools I can use to play around with and automatically convert the photo to just a few colors?

View 2 Replies View Related

AutoCad 2D :: Round Dimensions UP (within Specified Value) Instead Of To The Nearest?

Nov 22, 2011

I know of DIMRND, but how is it possible make acad round dimensions UP (within a specified value) instead of to the nearest?

(This could be very handy to make various lengths of wooden baseboards and other mountings fit to machine cabinet standard lengths. I'd like to keep all the work in acad, and avoid ms-excel.)

View 2 Replies View Related

AutoCad 2D :: Inaccurate Nearest Osnap

Oct 22, 2012

My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.

Image attached.

View 9 Replies View Related

AutoCAD LT :: Can Get Nearest Snap To Work On Multileaders

Aug 8, 2012

there is a way I can get NEAREST snap to work on the multileaders?

END and INT (where leader crosses other entities) work but cannot use NEAREST.

Can use NEAREST on normal leaders though.

Running AutoCAD LT 2013 on Win 7 Pro.

View 6 Replies View Related

AutoCAD 2010 :: Round Dimensions Up Not To Nearest

Feb 23, 2012

I am looking for a way to get my dimensions to round up instead of to the nearest.

For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved