Photoshop :: Fill Image With Texture From Another Image

Nov 22, 2013

I'm still new to PS and don't even know where to start! I have an image, it's a logo and is just a 3D letter H. I have been able to use pattern fills to create different version of the logo with different pattern fills. I am oddly enough trying to fill the "H" with the texture of a roast turkey from another image. I can isolate the outline of the letter that I want to fill but I'm not sure how to fill it. I've tried rubber stamping but that doesn't seem to work for me.

View 2 Replies

Paint.NET :: How To Fill Text With Image But Keep Anti-aliasing On Edges Of Image

Sep 18, 2013

Here is what I want to do. I have the letters 'XC' which I've played with a bit to look the way I want and due to anti-aliasing has nice edges. Now I want to basically fill those letters with an image. I can't figure out how to do this and keep the nice anti-aliased edges.

Current steps:

1. load image as base layer
2. Create new layer with text in it
3. using magic wand select a threshold that has smoothest edges on text layer
4. select image layer and copy the selection area... notice the hard edges of the finished result in the attached example. I want it nice and smooth and anti-aliased.

How to do this more elegantly? I've attached the basics of what I'm doing and the result.

Attached Thumbnails

View 10 Replies View Related

Photoshop :: How To Add A Texture To An Image

Apr 19, 2009

I need to add texture to a white image,

View 1 Replies View Related

Photoshop :: Any Way To Scale Image (texture) Down

Dec 26, 2012

I like the option of doing an IBL Lighting effect, but when I add a new texture image it is scaled so LARGE that I don't get any of the details of that image in my reflections, etc.

Is there a way to scale that image (texture) down?

View 4 Replies View Related

Photoshop :: Tiling A Texture/image

Feb 11, 2005

I have a texture and I want to fill the image with it as a background.

View 2 Replies View Related

Photoshop :: How To Texture Layer With Imported Image

Jan 25, 2013

I'm importing two separately made images to Photoshop; both made from Sketchbook Pro on the i Pad. One is a background, the other is just a doodle. (background)

(original doodle)

What I've done so far is use "Color Range..." to remove just the black, then apply the "Darken" effect within the Layers Palette.(current view)

What I must know is how to use my doodle layer as a mask; to use the texture from the background image in the doodles brush strokes, but not be seen in the areas that used to be black.

I aim to use this effect in many kinds of imported images made from my i Pad, as well as handwritten graphics. I trust this would be very simple to use with actual typed-out text, but I'm having difficulty to find pre-existing solutions.

View 1 Replies View Related

Photoshop :: Remove A Texture From An Scanned Image

Dec 22, 2006

I am restoring a very old photograph with all the familiar Photoshop tools (Healing Brush, Clone Stamp, Curves, and Noise Reduction). My image restoration has one need that I am not familiar with. The photograph was scanned from a textured print, which appears as a bas relief (like a canvas). I would like to remove this texture to help remove the noise and sharpen the photo. Please let me know any techniques for removing this moir?

View 5 Replies View Related

Photoshop :: How To Create Glassy Effect And Remove Texture From Image

Feb 18, 2005

remove the background/textured images from these patterns?

(the first image has a globe shap that i want to remove and the second has a hand with pointed finger.)

I want to keep the pattern because it creates a transparent/glassy effect, but when i tried to flatten the image thourgh the layer menu it shows up white (with the shapes i want to remove) without the transparent effect.

View 5 Replies View Related

Paint.NET :: Possible To Add Texture To Image

May 17, 2013

I'm working on an ebook cover and it was suggested I add texture. Can I do that in paint.net?

View 2 Replies View Related

AutoCAD VB :: Can't Go To Browser For Image To Be Used As Texture Map

Jun 16, 2008

i create a new material and i do it active. I cant go to browser for an image to be used as a texture map.

View 2 Replies View Related

GIMP :: Pattern / Texture In Image?

Jul 27, 2013

I want to know how I can put a pattern on an image. It needs to be an image with a transparent background. For example, this image (that I found on Google):

(this is a huge picture, I am just using it as an example).

Its a PNG image. Its a star template, filled with a pattern of stars....how can I do this using Gimp? I want to make different stars like this one..some with cheetah pattern, some with zebra pattern etc.

I know it has to do with the layers or something

Also, does Gimp come with templates I can use? Like a star, for instance?

View 2 Replies View Related

Photoshop :: Fill Shape With Image

Aug 4, 2013

I'm trying to use a single image to fill a shape but not consistently in the same position or size... similar to the cup below.

View 4 Replies View Related

Photoshop :: How Do I Fill In A Shape With An Image?

Sep 7, 2006

I need to fill in a rounded rectangle shape created on photoshop with an image how do i do that?

View 8 Replies View Related

Paint Shop Pro :: X3 - Can't Remove Texture From Image

Nov 6, 2013

I am very new to corel paint and accidentally added a horrible texture to an image - how to remove the texture.

View 1 Replies View Related

3ds Max :: Render Background Image To Planes / Bake Texture?

Oct 3, 2013

I saw a max demo at a show where they shattered the wall in a video/photo. The artist baked the background image to three planes (floor and two walls) like shown in the illustration, and then exploded one of these planes. It involved some kind of texture baking, but I didn't catch the whole process.

View 1 Replies View Related

AutoCAD Inventor :: 2014 - Cannot Read Texture Image

Sep 20, 2013

I have Inventor 2014 installed. My O/S is Windows 7 Ultimate 64 bit. The program has been working fine until recently. Now, I keep getting "cannot read texture image". I read all the solutions I found in the discussion group but, I cannot figure out how to resolve the problem with the solutions given. Should I uninstall and reinstall the program. All the files were opening as they should but then out of the blue I started getting this message for every file I tried to open.

View 2 Replies View Related

Photoshop :: How To Change All Colors In Transparent Image Rather Than Using Fill

Apr 25, 2013

I have a transparent logo. I've conferted it to RGB and tried using fill (it's primarily a single color except for some fading at the edges) but the results were not 100%. Rather than using Fill and leaving some scruff around the edges, can I just tell it to change ALL image bigs to a single color? How?

I am new at Photoshop.

View 4 Replies View Related

Photoshop :: Fill Lines With Texture

Mar 25, 2013

I have a question:

- I have two layers which I want to combine. The first layer is form by black lines (in my example are blurred, but this is not necessary) which each one act as a "way" that are to be filled with the second layer that is just a line textured.

Images attached, shows what I want to do automatically (in my example, I made the process manually, but I can't do it any longer because it takes too much time.

View 7 Replies View Related

Photoshop :: How Do I Fill A Texture In Perspective

Dec 5, 2005

way to do this other than filling the selection with the texture then resizing the fill and then clipping it to the object?

View 5 Replies View Related

AutoCAD Inventor :: Start New Doc Or Open File - Cannot Read Texture Image

Nov 28, 2010

When I start a new document or open a file in Inventor, I get a pop up saying: "Cannot read texture image C:UseerspublicDocumentsAutodeskInventor 2011TexturesChrome.dds" I moved the whole Autodesk file and changed all paths under settings>files in Inventor. The new path to Chrome.dds is C:UsersKajDocumentsAutodeskInventor 2011TexturesChrome.dds

View 3 Replies View Related

GIMP :: Recolour Wooden Image But Colour Overlaps Its Natural Texture

Sep 13, 2013

Well..i did'nt know where to put this. I want to recolour a wooden image but the colour overlaps its natural texture. Any solution for this?

View 3 Replies View Related

GIMP :: Transparent Background - How To Overlay Gritty Texture Layer On Shaped Image Only

Mar 27, 2013

With Gimp 2.8 (Mac) I have made a 3D text with a YouTube tutorial. It looks like the Pulp Fiction logo. [URL]...........

How do I overlay a grungy texture, so the letters look 'older'?I tried making the texture image the top layer in the list on the right and then this: right click -> layer -> transparency -> color to alpha.But then, the 'see-through' texture covers the entire square transparent background! Not just the letters...So, how do I add a transparent texture layer over a shaped image that has a transparent background?

View 5 Replies View Related

GIMP :: How To Fill Silhouette With Image

Jan 1, 2014

how you fill a silhouette of a face with an image?

View 2 Replies View Related

Illustrator :: How To Add / Change Fill To Image

Jul 6, 2012

How do I add/change a fill to an image in illustrator? I have binary tiff images (bitmaps). In CS4 I could change the fill from the default black to any other color simply using the control panel or the appearance panel. In CS6 it has no affect at all.

In the sample below the the image originally comes into illustrator shown in black. Once I update the fill to blue in the appearance panel, the image changes to blue (in CS4).

In CS6, changing the fill does nothing. Is there an extra step that now has to be performed? This is not a problem with the image. I opened the same image in both versions, followed the same steps and only have an issue in CS6.

View 3 Replies View Related

CorelDRAW X5 :: Fill Font With Background Image

Jun 22, 2011

I am trying to take a big block font and fill it with a background pattern image and am having NO luck.

View 3 Replies View Related

GIMP :: Fill Image With Dark Color

Feb 24, 2013

i recently started using GIMP and i made afew stencils with pretty decent success. i started making my 3rd stencil and when i go to fill the image with a dark color, it fills with dark gray instead of dark green, and the light color wont fill at all.

View 1 Replies View Related

Illustrator :: How To Fill A Shape With Image As Background

Mar 8, 2013

I am trying to get more familiar with Illustrator in meanwhile. Still have difficulties with some tasks.

I ve got designed a shape in illustrator which has to be need filled with image like a background. Imagine we have a circle and what I need is to fill only circle with costum picture, how to do that?

View 4 Replies View Related

GIMP :: How To Fill Areas Of Rotated Image (2013)

Aug 19, 2013

I'm trying to rotate an image. Actually, I figured out how to rotate it. But I can't figure out how to fill in the "empty" triangular areas that represent the area between the edges of the original image and the horizontal and vertical edges of the canvas. I would like to fill these spaces so it is not obvious that the image was rotated. How can I do this?

What is the standard way to manipulate images in this manner?

I've attached a sample image that I rotated.

View 5 Replies View Related

Illustrator :: Cannot Fill Path Correctly After Using Image Trace

Dec 14, 2013

When I pull a regular 2-color photo from the web and use the tracing option, selecting ignore white, then expanding it into a path, it will not fill correctly. Instead of filling the object created, it fills the entire photo area of the original image. URL....

In the video, you'll notice that the fill option after expanding is marked with a "?".The goal here is to, after expanding, fill ONLY the image of the cursor.

View 4 Replies View Related

Lightroom :: How To Enlarge Image On IMac To Fill Screen

Apr 24, 2012

I use an iMac with LR3. I would like to know if it is possible to enlarge the image so as to fill the screen. I have tried Window>screen mode> full screen and pressing L to get rid of panels but there is still a large black margin around the image.