GIMP :: Recolour Wooden Image But Colour Overlaps Its Natural Texture
Sep 13, 2013Well..i did'nt know where to put this. I want to recolour a wooden image but the colour overlaps its natural texture. Any solution for this?
View 3 RepliesWell..i did'nt know where to put this. I want to recolour a wooden image but the colour overlaps its natural texture. Any solution for this?
View 3 RepliesI'm doing a re texture mod for Fallout New Vegas and all I want to do is keep the weathered look while making my chosen apparel look unique.
View 3 Replies View RelatedMy question concenrs this photo: [URL] ... (this is my own photo by the way). Just so you know what I mean with 'sky' later on: you're looking at balconies.
I want to extend it on the left so I can make it a desktop wallpaper. However, the original photo does not extend far enough to allow me to just crop differently. How can I, using GIMP, fill up the new space so that it looks like the sky that's already there?
I have GIMP for Mac version 2.8.3.
You have an image of a wooden table, but would like the table to be a bit redder.So you would select the table and use a "blend with color" tool that would work like a bucket, but instead mix the default color of the table(or the selection) with the color you pick.So you pick red and... You got yourself the same table only instead of it being wood-brown, its reddish wood-brown.
View 4 Replies View RelatedI want to know how I can put a pattern on an image. It needs to be an image with a transparent background. For example, this image (that I found on Google):
(this is a huge picture, I am just using it as an example).
Its a PNG image. Its a star template, filled with a pattern of stars....how can I do this using Gimp? I want to make different stars like this one..some with cheetah pattern, some with zebra pattern etc.
I know it has to do with the layers or something
Also, does Gimp come with templates I can use? Like a star, for instance?
I obviously got far enough to add the images together and get the correct size. I just cant find any tutorials to show me how to make the layers blend and look more natural. I added a new background to an image and I want it to look like it belongs there:
[URL]
I have an image which I want to display using only a limited set of specific colours which I have defined in a colour palette. I am aware of the colour map plugin, but from what I can gather from the documentation it simply uses each pixels luminosity as an index. I want to to map each pixel to the colour in my palette that most closely represents the original colour. How do I do this?
View 2 Replies View RelatedI am desperately trying to change the Canvas Colour for an image in Gimp 2.8.
At the moment in displays in black and grey squares and when I save the image as a jpg it's black.
Basically, when I try to insert a photo through Edit>Paste As>New Layer, instead of the colour surrounding the image being white, it is black.
View 3 Replies View Relatedi am trying to just colour her lips in
View 1 Replies View RelatedWith Gimp 2.8 (Mac) I have made a 3D text with a YouTube tutorial. It looks like the Pulp Fiction logo. [URL]...........
How do I overlay a grungy texture, so the letters look 'older'?I tried making the texture image the top layer in the list on the right and then this: right click -> layer -> transparency -> color to alpha.But then, the 'see-through' texture covers the entire square transparent background! Not just the letters...So, how do I add a transparent texture layer over a shaped image that has a transparent background?
I am working on an extracted image that contains a logo and a transparent background. I cannot figure out how to change the background of the extracted image leaving the logo with the same colour. I will also like to learn how to change the colour of the logo.
View 3 Replies View RelatedMy image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.
How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.
I've rendered out hundreds of these before in 3DS max 2011 with no issue but in 2012 and 2013 the background colour of my ambient occlusion renders are black instead of being white for all the objects selected except for the first one. What's going wrong?
I set the colour to white in the render to texture window and if I select a single model it works fine but if I select the same model plus others, the first one is saved fine but the others all have a black background. I'm saving them as TGAs which is my preferred option and as I said has been working in 2011.
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
View 4 Replies View RelatedWindows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I am in need of an efficient method of changing an object within a photo to a standard colour without losing the shading and highlights. I am aware of the lasso selection tool but I have to do this process on potentially thousands of photos so need (in my perfect world) either an automated process or ( in a less perfect world) a process that takes only seconds per photo.
View 2 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View Relatedhow this effect was achieved?
The artist is called Jeffery Scott.
I'm using AutoCAD 2010 and I am trying to create a wooden peg in 3D used for coat hooks. These pegs are about 3 or 4 inches long with a tapered base to fit inside a hole for mounting. The base of the peg sits flush on the wooden surface and has a wide base which is tapered to a narrow top. The top looks like a mushroom head.
View 6 Replies View RelatedHow can I make a wooden building front into stonework ? I know it involves using the lasso to cut around the stone [I believe] and somehow placing the stone onto the wooden part of the building and using TYRANSFORM---but I need the steps again.
View 3 Replies View RelatedI'm taking classic movie images, making them into black and white silhouettes and trying to make a montage style thing of some great film noir images. Its all going well, got the making of the silhouette down but now comes my quandary.
Each image will overlap another slightly and where they overlap i want the top one to switch to an inverse of itself. For instance if the bottom layer is black when part of the layer above is overlaid only the section which overlaps becomes white in a kind of checkerboard effect.
I'm developing an application for iOS and Android and I love the style of the Wunderlist icon, so how to create this "rounded wooden drawer" effect in Photoshop.
View 9 Replies View RelatedHere is an example of my issue, when brush strokes overlap, a darker color is created:
I'm trying to brush with one flat color, with no overlaping effect. Here is a photo of what I'm trying to do, but this example was done with the pencil tool. I want to do this with the brush..I'd like to be able to switch from the top style to the bottom style when needed.
The text"shower"is overlap with the line, how can I erase the line around the text.
View 9 Replies View RelatedI draw a spline (gmask) and when it overlap itself, it will cut a hole. Can we change this kind of setting? I know it's already like this from the beginning but honestly what is the BIG reason to have this behavior ?
Also in gmask node, how to delete multiple spline without going to gmask schematic ? why can't just simply select multiple spline icon and press 'del' ?
How to change one texture to another . Added an attachment to show what i mean. example the snow texture, how to change just that part to a different texture.
View 2 Replies View Related