Photoshop :: Why Does First Frame Change When Edit Second
Dec 24, 2012
I am new to the Photoshop animation feature (in C.S. 5.5)., and I am having a problem. When I edit the layers in the second frame, the same changes occur in the first frame. If I add additional frames, they all change whenever I edit one of them. As a result, all of the frames are the same, which makes for a rather uneventful animation.
I have tried unchecking the "propagate frame 1" box, but that has no effect. What am I doing wrong? How can I limit the changes to the selected frame only?
View 6 Replies
ADVERTISEMENT
Nov 19, 2013
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
View 9 Replies
View Related
Mar 16, 2012
I have some embedded images in Frame Maker that I need to edit in Photoshop. I copy the image from FM and paste it as a new image into Photoshop. Most of the time its OK, but sometimes it comes up like this, or worse.
It should look like this.
Pasting the image into any other program (i.e. Word, Visio, Paintbrush) works, but it takes more time to fix it, the size is usually off and needs adjusting, and the output is of lower quality.
In FM, the images that seem to do this are JPEG / Frame Vector or PNG / Frame Vector according to the Facets field.
View 5 Replies
View Related
Oct 30, 2012
My skeleton has lost translation with my frame generator and has offset the sketch. I have tried "Edit with Frame Generator" but the peices seem to stay in place.
View 4 Replies
View Related
Jul 19, 2012
I seem to be having a very strange and annoying problem with Maya 2013. I cannot change the rederable frame range at all and also some of the other rendering options! I had this problem with Maya 2012 but overcame it by borrowing a friends project file with all the render settings working and then saving a pre-set of those settings.
View 3 Replies
View Related
Aug 30, 2011
We have a multi-member frame generator assembly. Some of the frame members are demoted to make sub-assemblies. One of these sub-assemblies is giving us problems. The FG options are missing. Ex. "Edit with Frame Generator" and "Delete with Frame Generator"....
Yesterday, we changed the size of the member using "Edit with Frame Generator" but decided against the change and just simply closed the file wihout saving. Upon opening the drawing back up, the change was present and the FG options were missing.
We have tried restoring previous versions. We have tried replacing the member with the original member file that we wanted using Component Replace. Nothing has restored the FG functionality. (Other sub-assemblies and the overall assembly are unaffected and have the FG options). However, we cannot even just delete this subassembly and try again. Delete is not an option.
How to get rid of it or restore the link to the frame generator?
Inventor Profesional 2012
View 4 Replies
View Related
Sep 14, 2013
Does Frame Analysis uses the finite element method?
If it does, how to view/edit the mesh?
View 4 Replies
View Related
Dec 26, 2012
I'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
View 2 Replies
View Related
Oct 30, 2012
Part of my daily workflow is to export a single frame of my edit for client approvals. In the export menu, is there a way to NOT have Smoke add the zeros to the end of the file name?
Also, what's the best (fastest) way to export a single frame? The way I'm doing it now is that I'm copying a segment to the the desktop then going into tools then using the repeat function. is there a better way?
View 2 Replies
View Related
Apr 3, 2012
Autodesk Inventor 2010 - How do I set default for "use standards notation" to off or unchecked in the "Edit Unit Attributes" dialog box for feature control frames? I want to do this because the Feature Control Frame style unit setting does not override it as I believe it should. This causes an extra value within the tolerance box of the feature control frame if the Standard General units differ from the style’s primary units.
View 1 Replies
View Related
Mar 25, 2013
This is an annoying issue within photoshop. I am working on an animation for a video and when I try to change the position of a charater on a new frame it also changes the positioning on all of the frames previous of it.
I am making a walk cylcle and I want the character to walk from one end of the screen to the nextl but, when I make a new frame, move him to the opposite end of the screen on a NEW FRAME it changes the previous frames position to match the current one I am on.
View 1 Replies
View Related
Jun 23, 2013
Then I'll open it to change the set frame of the layers to "automatic" but it goes back to "do not dispose" How can I stop this from happening? I already reset my settings on photoshop.
View 1 Replies
View Related
Nov 5, 2012
I have been unable to change the frame delay rate using Photoshop Elements 9 on Mac when trying to create animated gifs. Does it work on later editions of Elements?
View 5 Replies
View Related
Jun 27, 2007
In the samples of the multileader in the help box, the frames around the text are circular. When I insert a multileader, it has a square frame and I cannot find where to change that.
View 3 Replies
View Related
Oct 28, 2012
So every time I try to change my layer replace like this (200ms) (replace) in the name field, it makes no difference when i open the image up like in chrome or anything. I also change it when I export it to default value to use for all frames, and nothing comes out of it.
View 2 Replies
View Related
Mar 7, 2013
I have a Quicktime render of a project I made a few months ago that was originally created at 23.976 FPS.
I now need to prepare this Quicktime render for digital projection in a movie theater -- the file I need to give my client has to be 24 FPS progressive.
I'd like to try and convert my Quicktime and audio without going back to the project itself, as this is a complex project and would take a really long time to re-render at 24 FPS.
Best method to convert my 23.976 Quicktime movie? Are there specialty plug-ins I should look into?
View 3 Replies
View Related
Mar 29, 2012
how to change frame rate. I have a images 59.94 fps in the edit desk, i want to change to 23.976 fps
View 1 Replies
View Related
Dec 15, 2013
I want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
View 7 Replies
View Related
Mar 13, 2012
I am building frame using frame generator. Well, firstly I build a sketch and then afterwards from that sketch I already make frame itself.
What I want to do iis when I am changing length of some frame memebers in a sketch, I want frame members to be changed as well.
For example:
From here you see that everything is ok. Frame members are according to the sketch.
But when I am changing the sketch, frame stais as it is on the first picture without any changes. Previously it was changing, but then something happened and it doesn't change anymore.
For me it seems that reference skeleton of a frame is not referenced to the sketch of the frame .ipt.
Autodesk Inventor 2014 PRO x64
Running on:
HP Z400 Workstation
Processor- Intel(R) Xeon(R) CPU W3565 @3.20GHz
RAM- 6.00 GB
64 BIT
View 9 Replies
View Related
Jun 3, 2013
I've made a number of frame generated assemblies with standard ISO 30X30X3 L-beams. Now they wanna change it to another dimension still standard just 40X40X4 instead.
I'm pretty new to this but shouldn't I be able to do this for an assemble in one go with frame generator?
View 2 Replies
View Related
Mar 11, 2014
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative.
View 14 Replies
View Related
Jan 2, 2014
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
View 1 Replies
View Related
May 16, 2012
How do I change the right click and edit association so a jpg opens for editing in CS6 instead of CS5 in Windows 7? I'd like to keep both programs installed and Windows no longer offers the ability to edit the "edit" association.
View 7 Replies
View Related
Oct 21, 2013
I'm slowly getting there with iLogic, so I'm really just looking for the function / call to change one part from Frame Generator, to another part from Frame Generator.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
View 2 Replies
View Related
Aug 13, 2013
In older versions of Autocad when you created a viewport and locked it, the frame around the viewport would change color so that you knew if it was locked or unlocked.
Is there a setvar or something that needs to be set so that when you lock a viewport it's frame color will change???
Civil 3D 2014
View 2 Replies
View Related
Jan 23, 2012
I'm trying to update company title blocks, I have had success loading in the raster image and plotting a few.
Although everynow and then the image frame prints.
So I have checked,
IMAGEFRAME > is 2
FRAME > is 2
Can you think or know of any other varibles I might need to change in order to plot the raster without the frame?
View 4 Replies
View Related
Feb 27, 2012
I have several frames built by Frame Generator in project.
Than one frame has been diminished much while design so I use just several frame links just like parts without skeleton.
Those frame links I have renamed since I have several copies and I would like to have unique name. Now when I start the assembly consisting those links Inventor naturally inquires about missing files.
I show to renamed one and everything works ok except when I start the file again it asks again nevertheless file has been saved. Inventor still remember this frame link names as it used to be in browser and does not accept replacement.
[URL]........
I wish I must not rebuild those parts from scratch again. Therefore I have two questions
Is it possible to save this frame part as normal part (save as does not do it) ?
Is there some other way to get rid of Frame Generator status of some part built by Frame Gen?
View 1 Replies
View Related
Dec 23, 2011
I'm using ilogic rules to customize an assembly generated by content center of frame generator. I would like replace the parts on my assembly when I change an assembly parameter multivalue.
View 4 Replies
View Related
Apr 18, 2013
I get this error message when attempting to change the material in the frame generator.
View 9 Replies
View Related
Apr 17, 2012
what/where is the pref to change the color of wire frame of a selected object- I'm trying to use the unwrap uvw and the fragile, winsome pale blue of a seam doesn't show up against the peak white of the wireframe.
(I must say my whole experience of 3dsmax has been awful because I can almost never clearly see what I am doing, as the whole interface color scheme is horribly designed)
here's a pic - spot the seam - this is in hidden line mode as you can/cant see, the pale blue line of the seam is blown out by the wireframe.
View 6 Replies
View Related
Feb 22, 2014
When I open an image in 'edit', the reds become much more saturated than when it was viewed in the organizer. The amount of red saturation is abnormal and the photo remains this way afterwards, even when viewed in the organizer or opened with other software. Why is this happening and how do I stop this from happening?
View 1 Replies
View Related
