i just recently got a Wacom Graphire4 tablet, absolutely love it. my only problem is when i draw with it my lines are just a little "shaky". its just barley noticeable, is there a filter or something i can try doing to clean things up a bit? i like the pictures i just want them to look a little more professional.
View 1 RepliesI recently tried the trial version of photoshop CS6, and the lines I draw in photoshop are more like series of little straight lines. I can draw better lines in Paint Tool SAI with no stabilizer, but no matter what I do in photoshop the resulting lines are finicky.
My (really not that good at all) PC
i3-550 processor
4 GB DDR3 RAM
Intel HD Graphics (no workstation card for me, unfortunately)
500 GB HDD
Windows 7 64-bit Home Premium
I have 2 problems that I'm trying to solve.
1) on the attached, how do I produce the effect of the shaky light on the brick floor that can be seen on the 2 lights in background behind the swimming pool (tried shadow effects option)
2) the fire on the left hand side (in front) still looks too superimposed, even though I've tried some of the things I was advised to do on a similar post (adjust vibrant mid tones, use burn tool etc).
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
If you have a photo where the camera was shaking at the time, and so there is a ghost image of the whole photo, is it possible to fix that in any way? I had a look online, and saw a link about using the Unsharp Mask filter in GIMP, but I couldn't do anything with it. I would have thought that as the ghost image is so far out, and quite a lot more faded, that something could be done.
View 3 Replies View Relatedwhen placing a .oam file into indesign then previewing in the content viewer the 'tween' is not so smooth.
Is this a content viewer issue? The animation is simply a 1 second file with content coming in off the stage in a linear movement.
I want to be sure when published to the app store the final result will have a smooth movement.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
[URL]........
When i opened my ai file into ps, it converted the lines into pixels, how do i maintain the vector lines as shown in the link above?
Also, how do i color underneath those lines?
I use "Illustrator CS"
I painted a picture using "Paintbrush Tool".
(Bezier lines )
Is it possible to convert it to Bezier lines drawn by
"Pen Tool"?
way to make a CAD drafted plan look like it was drawn by hand? Or is there a way to use a photoshop brush to draw a line that looks like the pressure was varied along the length of the line, giving it some artistic character?
I've heard of people using Illustrator for this type of thing, but all I have is photoshop. I'm on a quest to make CAD drawings look hand-drawn.
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View RelatedI was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View RelatedI know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies View RelatedI want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View RelatedTrim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies View RelatedIs there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
Any way to convert area boundary lines to room separation lines?
View 1 Replies View RelatedFor some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies View RelatedI need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
See the example. I need the second lines.
One more thing that is pretty annoying. I'm working in webdesign and have to work with lines to make designs.
1. There is no chance to scale 1px line to be 2px
2. You cant make from 10px height object 1px line.
From 1px line always staying 1px.
From more than 1px you can make only 2px line not 1px.
Thing happening from X3 to newest X6.
Small things but making my work a bit longer.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
Civil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies View RelatedI am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
In both model and paper space, rectangles with corners filleted look fine. However, the filleted curved corners are not joined with straight lines once it's exported/plotted to PDF. I have to zoom in very closely to see this, so it won't be a big problem for actual printing. But I can't figure out why the lines are broken on PDF when they are well joined in both model and paper space.
I tried changing PDF quality, plot style, and anything I can think of, but to no avail.
Autocad 2012 on MAC, 10.7.2 with Acrobat X.