If you have a photo where the camera was shaking at the time, and so there is a ghost image of the whole photo, is it possible to fix that in any way? I had a look online, and saw a link about using the Unsharp Mask filter in GIMP, but I couldn't do anything with it. I would have thought that as the ghost image is so far out, and quite a lot more faded, that something could be done.
View 3 RepliesI'm using CS6 and trying to blend 2 images to HDR using the merge to HD Pro feature. I have used it before but now it appears that I can't select remove ghosts or select an image for prioritizing ghosts
I have tried photomatrix Pro and thats fine (but it was a trial).
I have tried impoting NEF, tiff and jpegs with no luck. I have also tried different bit depths which didn't work.
a friend of mine happened to take a photo of a sound mixing desk on location(my building).It was a snapshot over the sound mixing console and a pair of so called ghost arms appeared(i've not got the model and spec of camera yet. I've also asked what the previous image and the image after was.)
View 8 Replies View RelatedI am trying to remove the person in the background of the attached image. I believe I have finally installed the resynthesizer plug-in but am not successful in removing the person behind the couple shown.
View 1 Replies View RelatedI have a black text image. It has a dotted cut line (ex - - - - - - - ) boxed around the image. How do I remove it ?
View 3 Replies View RelatedI have an image, of a woman wearing heels, and i wanna remove the old, crappy looking floor from the image, where just the feet and the heels are visible. Is this possible, and easy to do? Here is a link to the picture.. [URL] .....
View 4 Replies View RelatedIs it possible to read raw image data into Gimp? By raw, I mean image data without a header or compression, i.e., RGB, 16-bit unsigned, or 32-bit floating point grayscale, etc.
I see "Raw image data" under "Open > Select File Type", but grayscale isn't listed. Is the only option? Are there any add-ons for grayscale?
I am using CS5 Photoshop on a Mac OS X version 10.7.5 computer. I have recently re-opened a couple documents that I created a couple months ago, and found one layer on each doc was practically invisible. Odd that it is the same black and white key line drawing layer that is affected on each file; all other layers remain in tact.
I checked the opacity, layer eyeball, and all the settings and nothing makes a difference. In addition, I have turned off all other layers to make sure nothing is blocking it from view and it remains faded. I have duplicated the layer several times to make the image appear stronger; however, It barely makes a dent. It's as if the layer has slowly begun to evaporate!
Let's say I have a picture with an ugly translucent overlay, like this:
If I have a copy of the overlay that isn't transparent (or is transparent, but doesn't have anything behind it), is there a way I could use that to remove it from the original image? One application of this would be removing UIs from video game screenshots.
I have used gimp for years, and never tried to remove a blue cast from an image. I have several images I have shot over the years, of winter scenes, now I want to see them in "normal" colors. I tried a couple of plugins and gimp operations, but I have no real good results.
View 2 Replies View RelatedI need to crop-remove slices of lots of of images, so preferably in one single step. Here is a more detailed description: [URL] Since this post is about two years old, I wonder whether this is still unsupported by Gimp.
View 2 Replies View RelatedI want to remove all but a rectangular area from an image. I do not want to make the rest of the image white, I want it to go away. I want to just have the rectangular image pixels left.
To be explicit, I want it to be like I cut up a photo, and threw the outside away.
I'm looking for a technique for removing the background from an image similar to the way noise canceling headphones work.
Prior to shooting the portrait, we took a picture of the background and then, without moving the camera, took the portrait so that we were left with two images, one with and one without the subject.
Noise canceling headphones cancel sound by emitting a sound wave that is the exact opposite of the sounds they pick up from the outside. I'm wondering if there is some technique that could be used to make all pixels in the background a specific color (by mixing with its "opposite") to then improve the functionality of the fuzzy select or select by color tools.
Using Gimp 2.8 in Windows 7. I have a scanned image of a topological map. At areas where the contour lines get too close, squares appear in between the image (See attached photo). Is there a good way to remove these extra squares in the contour lines rather than tracing the lines manually?
View 1 Replies View RelatedI resized my image from small to large. It is now 600wx300l px (for blog banner). How do I remove the blur and clear it up? Is this possible?
View 2 Replies View RelatedI have a basic image and I just want to remove the background and be LEFT just with the image (i.e. No white background).
I have opened the image with Gimp and on this image I was able to "add alpha channel" which I believe needs to be done. Do I need to do anything after I add the Alpha channel?
This is what I did next:
The image is 100% and background 1.1mb. Select Fuzzy tool and position cursor over the background and click. The image and the image background have the moving dashes going around them.
Next I hit the delete key and the background goes checkered. Still there are the moving dashes around the image and the background outer square. Next I hit autocrop and I am left with a reduced checkered background around the image.
My question - what do I do from here. I just want the image with no background what so ever; also is there anything I need to do with saving too.
Previously I have saved this and when I go to use the image it appears to be much the same as the original with a white background.
I have an issue of a ghost image appearing in the composition background. I can't figure out how it got there or how to remove it. It's really annoyong as the image also appears in rendered videos.
This only seems to appear when my composition settings is set at 1024 x 576 px, which I must use for projects. If I increase the composition size by 1 pixel, the image disappears, change it back and it reappears.
note, that there is no files in my project and the image still appears.
I have a world map(.gif file) which has yellow circles on top of it. I need to erase all the them from the map. How can I do it using GIMP? Is there anyway I can get my original picture back?
View 3 Replies View RelatedI have a few images that I have saved from online that have an alpha layer in them. When I open them in GIMP, the checkerboard pattern makes it far too difficult to edit the image. When I try any of the obvious options for removing the alpha layer, the result looks awful.
How do I remove an alpha layer without changing the way that an image looks when it's viewed in an image viewer (or GIMP)?
After removing an image from a background, what is the proper procedure ( in order) to "save" the image to "file", for later use?
View 1 Replies View RelatedWe are trying to make a little art project with my daughter for her school, so my wife went and took pics of each of the kids in her class making a "heart shape" with their hands. I have the backgrounds that will go behind them all complete, so I just need to extract the hands. Well, I thought I was being smart by purchasing a green piece of fabric to put behind them, but this has almost caused more of a hassle. In the original hand picture, you cannot really see the problem, but after extracting the hands from the original, there is all kinds of green that has bled into the skin color of the kids' arms.
View 6 Replies View RelatedHow do I edit sand and coarse textures, so well that even the experts can't find the edit?..
"Sand-brushes"..?
I encountered was after I outlined an image in order to remove the background around it, i could not disconnect from the outline tool (scissors). How do I do the disconnect?
View 4 Replies View Relatedi just recently got a Wacom Graphire4 tablet, absolutely love it. my only problem is when i draw with it my lines are just a little "shaky". its just barley noticeable, is there a filter or something i can try doing to clean things up a bit? i like the pictures i just want them to look a little more professional.
View 1 Replies View RelatedI recently tried the trial version of photoshop CS6, and the lines I draw in photoshop are more like series of little straight lines. I can draw better lines in Paint Tool SAI with no stabilizer, but no matter what I do in photoshop the resulting lines are finicky.
My (really not that good at all) PC
i3-550 processor
4 GB DDR3 RAM
Intel HD Graphics (no workstation card for me, unfortunately)
500 GB HDD
Windows 7 64-bit Home Premium
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
I was wondering how do you take the camera phone effect on a picture. I've tried many times but it would come out really burnt looking or too bright and you can still see the little dots that the camera phone leaves. Anyone know how?
View 2 Replies View RelatedI normally generate a new camera calibration profile by x-rite everythime I change the light settings. This gives rise to a lot of camera calibration profiles in LR5. How to erase them after use?
View 2 Replies View Relatedwho has lightroom 5 tell me if its possible to remove the in camera crops from a 5d mark III? It wasn't possible with 4.4 without a plug in that I couldn't get to work anyway.I've shot two jobs before realizing the information was gone once imported.
View 2 Replies View Relatedwhen placing a .oam file into indesign then previewing in the content viewer the 'tween' is not so smooth.
Is this a content viewer issue? The animation is simply a 1 second file with content coming in off the stage in a linear movement.
I want to be sure when published to the app store the final result will have a smooth movement.
And that problem is how I can remove the frames, let's say for about ten minutes, of a video I made with an DSLR-camera. Maybe the answer is simple, nevertheless I couldn't find it.
View 4 Replies View Related