a friend of mine happened to take a photo of a sound mixing desk on location(my building).It was a snapshot over the sound mixing console and a pair of so called ghost arms appeared(i've not got the model and spec of camera yet. I've also asked what the previous image and the image after was.)
View 8 RepliesI am using CS5 Photoshop on a Mac OS X version 10.7.5 computer. I have recently re-opened a couple documents that I created a couple months ago, and found one layer on each doc was practically invisible. Odd that it is the same black and white key line drawing layer that is affected on each file; all other layers remain in tact.
I checked the opacity, layer eyeball, and all the settings and nothing makes a difference. In addition, I have turned off all other layers to make sure nothing is blocking it from view and it remains faded. I have duplicated the layer several times to make the image appear stronger; however, It barely makes a dent. It's as if the layer has slowly begun to evaporate!
If you have a photo where the camera was shaking at the time, and so there is a ghost image of the whole photo, is it possible to fix that in any way? I had a look online, and saw a link about using the Unsharp Mask filter in GIMP, but I couldn't do anything with it. I would have thought that as the ghost image is so far out, and quite a lot more faded, that something could be done.
View 3 Replies View RelatedI have an issue of a ghost image appearing in the composition background. I can't figure out how it got there or how to remove it. It's really annoyong as the image also appears in rendered videos.
This only seems to appear when my composition settings is set at 1024 x 576 px, which I must use for projects. If I increase the composition size by 1 pixel, the image disappears, change it back and it reappears.
note, that there is no files in my project and the image still appears.
if i just want the girl in the middle of that transparent blob, and not the rest with distorted parts of the wall and the transparent background that should be behind the guy to the left?
View 9 Replies View RelatedI'm using CS6 and trying to blend 2 images to HDR using the merge to HD Pro feature. I have used it before but now it appears that I can't select remove ghosts or select an image for prioritizing ghosts
I have tried photomatrix Pro and thats fine (but it was a trial).
I have tried impoting NEF, tiff and jpegs with no luck. I have also tried different bit depths which didn't work.
I am trying to create a banner for a website. I want to take a portrait from another pciture and add to mine, but I want it to be "faded" or "lighter" than the actual banner.
View 3 Replies View Relatedi am trying to clean up grayscale scans of line text to prepare it for ocr processing. i need to do three things in BATCH processes:
1) there is often some 'ghost text' that comes through from the other side of thinner pages when they are scanned, as well as some page texture. i need to strip these lighter gray marks without altering the black text. i don't want to binarize the text, as this reduces the text quality. just clear out the specific 'tone bands' of gray that are marking up the pages.
2) basic page splitting.
3) remove center gutter shadows left by scanning on a flatbed scanner.
how to do something like the following picture effects. I've been searching a lot and either I'm searching for the wrong things, or there isn't much info on this effect? =( The effect is kinda like a glassy, wattery, transparent object.
View 5 Replies View RelatedI am trying to create an effect that I saw in ghost of the shell
The video will explain plz skip to 1:51 sec to see the effect. [URL] ... How can I create this in Max?
I'm trying to make a ghost character for a client, but I'm having issues with the material.
I'm pretty much going for something like a "casper" effect.
It's a pretty simple set up, I've using a Blinn material w/ a falloff on both the opacity map and self-illumination map so the outer edges glow yet it fades towards the camera. I've also got a displacement map for the characters subtle detail.
The only problem I'm having is the area's (such as the ears or arms) the mesh is exposed through the model's transparency. I need to figure out a way to hide this... is there anyway I can fix this?
Is there a way to replace all "ghost" colors in the doc (colors that don't exist in the swatches palette) with a global process color?
View 4 Replies View RelatedWhen I click on some text in a particular dwg. I get ghost images on the same text in the various annotative scales. I know there is a setvar that only shows the text in the current scale.
View 1 Replies View RelatedI'm working on profiles for the first time - built my pipe network.
I have these dotted ghost lines - what they are and what I might have "on" that is causing them?
I have created a model containing three interlocking parts. I now need to do a version showing one of the parts with the other two parts ghosted in.
I changed the object visibility of the two I need to show ghosted to 0.3. When I do this the part is see through and shows all the hidden detail at the back of the part.
Is there a way I can ghost the other two parts in but not show what is going on behind them? I tried all the settings in object visibility but nothing seems to work? Is there another way to achieve faded parts?
I am doing a building as shown in the attached image. I inserted the file as a link and flipped to make the total building, but in the perspective view are showing these ghost lines that do not let me save a shaded image of the building. I have just updated the graphic driver to the certified by Autodesk.
View 2 Replies View RelatedFrom DWG files exported off Vectorworks, in Model Space my lines are interrupted with blank area which are non removable, unpickable. If I move my drawings in MS theses black areas stay in place, the problem is: I can drag my drawing away from them but without seeing them, where they are. In Paper Space, these invisible hatch turned into grey area in random location and as grey background behind Elevation Benchmark (circle+text), room text, floor section.
How to reveal and delete these ghost Hatchs?
Is this possible to hide the ghost display which is not in x5. This is confuses me often.
View 7 Replies View RelatedI don't consider myself a minimalist in any way, but I like to keep my personal folders clean of any system files. I recently changed the path for the autosave-folder as it intruded my private work files. The problem is that even though I did change the path, every time I start AutoCAD a new 'Autodesk'-folder is created in my personal folder. It still contains the sub-level 'Autosave'.
View 1 Replies View RelatedOne of my parts had "Invalid origin/axis" problems and I got all my visible aketches fixed. But I have what I call "ghost" sketches left from bolted connection updates, erasures etc. I can get rid of the visible points but cannot access the sketches to erase them.
The red + sign showing irritates me and I want rid of it.
I have attached the file, 2014 version, some of the adaptive features may not come thru or they may work better on another computer, who would know.
Previously in 2013, you were able to identify you clip ghost joint set and your master controller separately. HOWEVER, in maya 2014 there is only one option and that is "Set Ghost Clip Root". This works on HIK IF and only if you select the root FK controler, yet I've not been able to get it to work if I'm using a custom rig as the joint is driven by a transform (i.e. a nurbs curve). , using a reference character seems out of the question with anything related to trax and clip sequencing if you want to use the ghosting options.
View 3 Replies View RelatedI created a drawing where I created a grading object (pad) under a site, a couple of alignements, etc.
After deleting everything to maintain layer states and settings, I saved the drawing as a starting template for day to day drawing (left it as a dwg, not dwt)
When I start a new drawing from a saveas of the template, it says that there is already a grading group named 'pad' but there isn't anything shown in the prospector. Purge hasn't worked. Any ghost entities left in a drawing.
I've also noticed that if you screw up a grading and try to delete the entire site and start over...you get weird results too. It's like it remembers old stuff you did (ghost entities) and won't let you start with a clean slate.?
Infrastructure Design Suite 2013
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Corel Draw X5 (32 bit) ships with gpl ghostscript 8.64 (32 bit). On my PC (win7 ultra x64) is installed gpl ghost script 9.02 (x64) too.
Does CDR use the built-in gs hard-coded or does it read the information from the registry (or some config file), so I could "redirect" CDR to my newer version? I´d like to do this (any problems about x64 ?) and then uninstall gs 8.64 (that came with CDR).
Is it possible to do so and tag here any problems about incompatibilities?
acad 2012 is creating ghost files on my desktop. How do I stop the creation of them?The files are greyed out and are titled "Drawing2.dwl2".
I remember having this annoyance, for me at least, a year or so ago but don't remember how I made them disappear.
This has happened on all versions of AutoCAD in our office.
I paste schedules from Excel into AutoCAD. I print out the sheets and ghost lines appear on the PDF and hard copy that were not intentionally place in the excel file. What is happening and what can be done about it.
I also paste a tif file on a sheet change the setting to imageframe <0> and a residual line willl appear in pdf and hard copy that seems to be the border of the tif image.
I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
I am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.
View 3 Replies View RelatedI'm trying to make an image in which a friend appears as a stereotypical ghost. I'm at a loss as to how I should proceed. What kinds of effects could I use to make a semi-transparent apparition?
View 2 Replies View RelatedAny way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.
View 6 Replies View RelatedI am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View Related