Photoshop :: Printing A Document Created In 5?
Oct 10, 2011I created an envelope with a return address and logo in photoshop. It looks fine in print preview but when it prints the envelope has a pink tint.
View 2 Replies
ADVERTISEMENT
Photoshop :: Can't Print CS5 Document To Same Size As Created On 27" IMac
Jun 6, 2012can't print photoshop cs5 document to same size as created on 27" imac.
View 1 Replies View RelatedPhotoshop :: Printing Large Document
Aug 10, 2008I need to design a large logo for a billboard ad. The dimensions are about 14'x6' I spoke with the printing company and they weren't all that helpful about DPI & such. The most info I could get was that they print at 150 DPI, and if I wanted to make my image smaller they will scale it up.
it's a very elaborate pixel based graphic that I don't want to be distorted when blown up. So, I've been trying to design at the literal dimensions of the sign, and 150 pixels/inch (in CS3). Problem is that I'm getting all kinds of scratch disk errors (even with 250gb free) and excessively long wait times between modifications to the document.
Is there any smaller size I can put this document to or anything I'm missing? I realize that I should be using a vector design, but the person I'm doing it for is very set on an elaborate pixel design with tons of detail.
Photoshop :: Printing A Full Page Document
Jun 21, 2007I create a graphic that has the dimensions of a standard piece of paper (8.5in X 11in) and then i savedit on a disc for my friend and he goes to office max to print it out and it comes out with a border... Is there a way to get rid of the border or can printers just not print full page.
View 6 Replies View RelatedPhotoshop :: Printing / Resolution / Document Size
Nov 9, 2008I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
Anyway, my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
Photoshop :: Printing / Resolution / Document Size
Nov 10, 2008I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
Photoshop :: Moving Edited Photos Onto A New Document For Printing
Jul 3, 2008i am having problems moving an edited photograph to a new document for printing. I get a screen stating 'The target document has a different depth than the source document. This may result in lower than expected quality.
if i try to print from the edited photograph without moving it onto a new document it doesnt fit onto an A4 paper and comes up with 'Specifit print settings (Interpolation, Calibration,Encoding) will be ignored since you are printing to a non post-script printer.
This has just started to become a problem I have not changed printer which is a printer/scanner/copy Lexmark 4550
Lightroom :: Send Photobook Created On V4 To Blurb For Printing?
Mar 21, 2013I am trying to send a photobook created on Lightroom 4 to Blurb for printing.Â
I was told from Blurb that soft proofing function on Lightroom 4 does not work for them because the color profile is different. What does Adobe recommend to do to match the color space?
Photoshop Elements :: Document 60cm X 23cm - Printing In Series To Paste Afterwards
Aug 18, 2013I am trying to print a doc 60cm x 23cm but my printer will only accept A4 paper. I am happy to have this printed over a few sheets but even using the custom print options for paper and print sizes I am only able to print one section of the picture. How I can print a series from the picture so I can paste up afterwards?
View 1 Replies View RelatedIllustrator :: CS6 Crashes When Saving Or Printing Existing Document
Mar 27, 2013The problem doesn't apply if I create a new document. This is the error code: [URL]
View 3 Replies View RelatedIllustrator :: When Printing - Document Prints Black Instead Of Blue
Jun 25, 2013Computer is Windows 7 x64 running adobe CS6. The printer is a HP laserjet 3800dn the driver for the printer is PCL5 but it does the same thing printing with the Postscript driver. We have a navy blue color that prints out black for some reason. In the print options right before releasing the job we changed the use Illustrator colors to use Post script colors and it still does the same thing....Prints black where blue is supposed to go on the document. Doesn't matter if it is a .jpeg or plain text. Sending the job to a different printer works which is a Xerox work centre.
View 8 Replies View RelatedCorelDRAW X6 :: Multipage Document With Linked Frames Of Paragraph Text Not Printing Pages After 3-rd
Aug 5, 2013I have multipage (16 pages) document with linked frames of paragraph text. Every page consists of 2 linked frames of paragraph text and second one is linked to the first one of the next page. When printed, it prints only first two pages as a whole. And the 3-rd and all the others prints only first frame of the page and two rows of the second frame of the page.
Is this my printer (Canon LBP3010) or the CorelDRAW ?
BTW: Paste 16 pages from WORD to Corel X6 takes infinity and crashes. In Corel 9 it takes about a minute for 80 pages!
Photoshop :: Error Opening The Portable Document File (PDF) Document
Nov 5, 2013I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
Photoshop Elements :: Can Save JPG Document Into Non Photo Document File
Nov 23, 2013I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View RelatedPhotoshop :: Target Document Has A Different Depth Than Source Document?
Jul 5, 2013as of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
AutoCAD .NET :: Adding A Document To Document Manager Collection
Jul 30, 2013The code below crashes with an "attempt to write to protected memory" Â in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then   acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
AutoCAD Inventor :: How To Get Model-document Name For Drawing-document
Feb 11, 2013I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedPhotoshop :: Tile Printing With High Resolution Printing?
Oct 2, 2006i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
Lightroom :: Convert Colour Profile Of Custom Printing Package From Pro Photo To SRGB Before Printing
Oct 30, 2012How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedPhotoshop :: How Do I Add .swf Created With
May 14, 2008I've used Photoshop CS3 to create a Flash Web Gallery. I put that folder in my site root in dreamweaver, but when I add the .swf to the webpage- it only shows as a white box. Even when I press "play" nothing happens. What else needs to be done? All of the files created with the .swf are also already in the root directory.
View 1 Replies View RelatedPhotoshop :: Can This Be Created In CS2-3?
Nov 19, 2007This CBS News background...can it be recreated in Photoshop (pref left in layers)
View 2 Replies View RelatedPhotoshop :: Created Action In CS2 Does Not Run?
Dec 23, 2012created an action in cs2 using ctrl-f12. When I hit ctrl-f12, I get a print option and my action does not run.
View 8 Replies View RelatedPhotoshop :: Preview Is Not Being Created
Oct 27, 2004I am running Photoshop 7 on a Mac, the problem is that when I save a group of Jpegs, for some a preview is created, and others there is no preview. I am also using iPhoto, To get a preview I am having to use SAVE AS and that is tedious.
I seem to only be able to view the images with a preview on my DVD player - so If I burn a disk, I have to create previews beforehand.
Photoshop :: Uninstalling CS3 Created
Apr 17, 2009I kept CS3 on my system even though I've been using CS4 since it was released. Uninstalled CS3 yesterday and since then I cannot call PS4 from Br4/ When I double-click on an image in bridge it brings up the magnifier. The menu option, "File-->Open With" does not show PS CS4 as an option nor does it give me a "Choose File" option. It does list Acrobat, my browsers, and Paint as opening programs. How can I get PS4 to show as an option here? Have searched all the Preferences but see no way to do it. On a related note -- is my memory faulty or didn't a double-click at one time allow one to open a photo in an external editor? Oh yes, I can open PS4 from LR, and I can open Br from PS4 via menu or icon click. Would appreciate some help. JEL P.S.I found I can get to PS4 from Br4 by first opening a photo in Camera Row and then opening it via the Open Image button.
View 2 Replies View RelatedPhotoshop :: How To Created Splash 18
Apr 5, 2003how to create team ps splash 18,
i like the shiny balls,
Photoshop :: Using Psd File On A PC That Was Created...
Apr 11, 2008I am new to this. Any help I can get is greatly appreciated. I am working on a PC using Photoshop CS2. I am working with a graphic artist that uses a MAC (Photoshop CS2). When I try to import her files into my Photoshop I get a message that says the layers can not be read and I must make a composite to see the file.
I need to see the layers so I can create menus for a DVD I am making( I am using Encore) Am I getting this message because I am going from a MAC to a PC? How can I get around this?
Photoshop :: Locate Action Created In CS5?
Jun 14, 2012How do I locate and action that I created in CS5, so I can load it into CS6?
I am running CS5 and 6 using Mac OSX Snow Leopard.
Â
I created two actions, but am now not sure where they reside, to load them into CS6
Photoshop :: How To Determine If PNG Created Is Interlaced
May 31, 2012How can I determine if a png, created in photoshop, is interlaced?I have about 10 png files I need to check. Sure I could just re-save them for web and make them all interlaced,
but I don't want to lose image quality by going through this process again if it is unnecesary (because they are already interlaced).
Photoshop :: Delete Preset Created In PS5 HDR Pro?
Feb 26, 2012How can I delete a preset I created in PS5 HDR Pro?
View 2 Replies View RelatedPhotoshop :: Way To Save Actions That Have Created?
Nov 23, 2012What is the correct way to save photoshop actions that I have created? I currently save them by selecting the folder and then 'Save Actions' from the dropdown.
View 2 Replies View RelatedPhotoshop :: Created Layered Templates In CS6
Jan 21, 2013I have created layered templates in CS6. I've saved them both as psd and tif formats (an industry requirement). I have no problems reopening the files but some of my colleagues get an error when opening the tif file. This is the error message "This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead choose flatten to load composite data as a flattened image."
View 7 Replies View Related