Photoshop :: My Computer Shutdown When I´m In Photoshop 7.0
Dec 6, 2002when I´m using photshop my computer just shutdown.
No popups, no warnings, no nothing!
It just shuts of!
ADVERTISEMENT
Photoshop :: What's Causing CS6 To Shutdown Program And Computer
May 19, 2013CS6 not only shuts down itself, it shuts down my computer. I have a high-end graphics card (which I specifically got to run my photo-editing monitor), i7 processor, Win8, 64-bit, high resolution. It always happens, without fail, when I choose a large size brush or whatever tool in cloning, spot-healing, dodging, burning, etc). Otherwise, it runs fine. But if I choose a large brush, etc, it only shows me a half circle instead of the full circle, freezes PS, shuts down my computer, and then the computer re-starts.
I used this same PS program on my previous Win7 64-bit computer, which had far less capability, processor, graphics, and other credentials than this current one. It has nothing to do with having other apps running because it happens regardless. It has nothing to do with Bridge because I don't use Bridge. It happens every time as described above. When the computer boots itself back up, there's an option for me to send the notice of the error to Microsoft, which I've done about 50 times. Could it have something to do with Win8? Hope not, because I checked before I (regrettably) got a computer with Win8 to make sure Photoshop was compatible with Win8.
Lightroom :: Computer Shutdown While Working In 4?
Mar 26, 2013Since I installed LR4 my computer shuts down every time I am working in it. What could it be?
View 1 Replies View RelatedPhotoshop :: Cs6 / IMac Won't Shutdown
May 18, 2012I have the new cs6 master collection and all programs work well and don't cause problems when I shut down my iMac except Photoshop. If I use photoshop, anytime I try to shut down my computer all I get is a spinning wheel and computer will never shut down. This happened on cs5 as well and thought newer version would fix problem but it has not.
View 2 Replies View RelatedPhotoshop :: Unexpected Shutdown
May 30, 2008my CS2 shuts down when I try to open a raw file and sometimes in the middle of editing an image without warning and without saving any changes. I purchased a new Dell computer hoping it would solve the problem but it didn't. It's still happening with this new $6000.00 computer running Windows XP Pro. Is this a known issue and would an upgrade to CS3 resolve this matter?
View 1 Replies View RelatedPhotoshop :: CS5 Stopped Working And Must Shutdown
Mar 10, 2013My CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies View RelatedPhotoshop :: CS4 Shutdown After Alien Skin Use?
Jan 29, 2012I've been using CS4 on my macbook pro, I have Alien Skin plug ins that I use quite a bit. Recently, after using the Alien Skin actions, CS4 shuts down if I try to use them a second time. So, I open a photo, use the Alien Skin, continue to edit, but if I decide to use Alien Skin again, it shuts down CS4.
View 1 Replies View RelatedPhotoshop :: CS6 Not Closing Process (EXE) After Shutdown?
Jul 27, 2012I have this strange problem with processes that are not stopping Because it is not stopping i cant open photoshop on a later time hours later because the program thiks it is running on the background somewhere i cant find it. After terminating the process photoshop.exe and retry it opens again.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 24567 MB
[code]....
Photoshop :: CC Program Shutdown Directly
Oct 24, 2013photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies View RelatedPhotoshop :: Using Brush Causes Program Shutdown
Oct 17, 2008I have Photoshop CS (version 8.0) running on Windows XP Home (SP3). I searched the help files, FAQs, and the forums and didn't find anything related to this.
Today I opened a document I've been working on, created a new layer, picked a default 9 pixel hard round brush, and when I clicked on the canvas to paint I got "could not complete the task due to a program error" and right after this Photoshop shut down.
I ran my anti-virus, but the computer is clean. I then checked all the brushes in my Photoshop folder to see if there were any odd ones in there - there weren't. Then I closed PS and when I opened it again I held down Shift+Ctrl+Alt to reset the Prefs file. I created a new document and reset the brushes, then I tried once again to paint with a default brush. Again I received the same program error and PS shut down.
I uninstalled PS and reinstalled the program. I restarted my computer and opened PS and tried painting again - the same error, only this time PS didn't shut itself down.
I'm at a loss here. I know Photoshop can have some psychotic moments, but this is the first time I have encountered this weird behavior. If anyone can give me some suggestions on what might be happening and how to remedy it I would appreciate it.
Photoshop :: Automatic Shutdown Of CS6 On Printing Image
Jan 18, 2013When I try to print an image, Photshop completely shuts dow. What is going on?
View 5 Replies View RelatedPhotoshop :: Install CS5 On New Computer To Replace Old Computer That Crashed
Oct 28, 2013I have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies View RelatedPhotoshop :: CS6 Shutdown After Using For 5 Minutes / No Image Can Be Display On Canvas
Jun 11, 2012Photoshop CS6 shut down after using for 5mins; no image can display on canvas.
View 5 Replies View RelatedPhotoshop :: Using Clone Stamp In CS6 (windows 7) Repeatedly Shutdown?
Sep 3, 2013Using clone stamp in CS6 (windows 7) repeatedly shutdown photoshop. What is causing this?
View 1 Replies View RelatedPhotoshop :: Screen Turns Bluish On Shutdown Asus Ee...
Jan 25, 2009I'm running photoshop on my Asus eee pc but I have it running on an Acer Aspire 5670 monitor (bigger screen makes it easier for my retouching work!) and whenever I shutdown photoshop my screen gets a little bit bluer.
I can fix it by doing a recalibration but it's still kinda annoying because I don't always remember to do it and I'm sure you can understand that trying to get skin tones right when your screen is blue can be an utter.
Photoshop :: Slideshow Video Clip Forces Shutdown
Mar 16, 2008I am using Photoshop Elements 6 in Windows XP.
My video clips play in sequence with thumbnails in full screen view, but freeze and shutdown software in slideshow mode. My goal is to burn slides and clips and show on TV via dvd player. Why does everything work fine in full screen mode and not in slideshow mode?
Photoshop Elements :: Organizer Will Not Restart Unless PC Is Shutdown And Turned On Again
Nov 8, 2012If I close down PE11Â (Trial) the Organizer will not restart unless the PC is shutdown and turned on again. The editor will restart without a problem but not the Organizer.
View 3 Replies View RelatedPhotoshop Elements :: Why Does PSE11 Shutdown When Try To Open Organizer
Mar 10, 2013When I try to open the organizer it will start to load and then shut down. The editor opens up with no problems.
The program was working fine until I tried to import my picture files into the organizer. Ever since, it has been shutting down like this.
I tried uninstalling Photoshop and reinstalled it and the problem persists.
Photoshop :: CS6 Is Opening Auto-recovery File Even When Program Had Been Shutdown Properly?
Apr 12, 2013I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
Â
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
 CS6 Version 13.0.4
Â
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
Lightroom :: Starting LR5 On An New Computer And Porting LR4 Pics From A Previous Computer
Mar 15, 2014I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies View RelatedLightroom :: 4.2 Doesn't Shutdown Completely?
Oct 19, 2012I have an intermittent problem with LR. I click to start and nothing happens. I have to go into Task Manager, Processes, find that LR is still active from the last time I used it, and shut it down, before I can restart the program. I never had this problem with LR 1,2,&3.
View 1 Replies View RelatedVideoStudio :: X5 Intermittent Shutdown During Menu And Preview?
Oct 27, 2012I have had VSX5 shutdown completely without any error messages while in Share>Create Disc>DVD. I have no problems in the Add Media step. I add a Video File, MPEG2, in Add Media and change the Thumbnail to have the title of the clip. I click Next to go to Menu & Preview. I select a main menu from the gallery, select Hide Object for one of the provided texts in the main menu, and edit the PRJxxxx one. I select the Edit tab. Select Customize>Motion Filter and Zoom In and Out options. When I click OK to leave the Customize Menu, VSX5 completely shuts down without any error messages. This doesn't occur every time. I have also clicked OK, returned to the Menu & Preview window, and then clicked Preview. After clicking Preview, VSX5 has shutdown. I have also had the problem after selecting Navigation buttons in Menu & Preview and clicking OK. I have opened an incident with Corel support, and they asked if I had Service Pack 1 installed and if my software and drivers are up to date. I have Service Pack 1 installed and everything is up to date.
View 14 Replies View RelatedAutoCAD Architecture :: Unknown Error On Shutdown
Sep 28, 2011I receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies View RelatedAutoCAD 2013 :: Display Driver Shutdown
May 27, 2012I've recently installed ACad13 and it shuts down on me at least once, sometimes twice a day - A message appears that says "Display driver fail to display". I have also installed 13 onto a brand new computer using Windows 7 (64 bit). Or is it a problem relating to the new pc - everything else seems to work ok on the computer
View 1 Replies View RelatedLightroom :: Shutdown And Startup When One Switches Catalogs?
May 21, 2012I find it very inconvienent to have lightroom shutdown and restart every time I switch catalogs. I'm sure programing to eliminate that has got to be simpler than all the wonderful stuff we can do to our images.
View 16 Replies View RelatedAutoCAD Inventor :: Punch Tool Causes 2013 To Shutdown?
Jun 18, 2012why the Punch i created causes the following?Â
1. The punch will not work with part 1.I have 4 points for the Punch on part-1
2. When attempting to get the 4 punch holes on to the flat sheet it causes inventor to shutdown.I have done 4 attempts to fit the punch into the flat sheet (part-1) and 4 times it has shutdown Inventor
AutoCAD Inventor :: Unexpectedly Shutdown / Lose Savings
May 23, 2013After saving several times I am not able to open the last saved version of the file when I open it after unexpectedly shut down. All my saving is gone! Nice to use DROPBOX to upload my last saving. Why are inventor undoing all my saving?
View 4 Replies View RelatedIllustrator :: CC - Layers - Row Size Resets On Program Shutdown
Oct 3, 2013In illustrator I like my row size to be at 50px in size. Every time I close down AI and reopen it later it seems that the layers have reverted back to their default sizes (I think its like normal or somthing cartoonishly small)
Â
To get to the option panel I'm talking about, bring up your layers in AI then in the top right drop down menu select Panel Options at the very bottom of the contextule menu, and in that window the top options are "Row Size".This is where I pick "Other" and then set it to 50px (every time).
Lightroom :: Windows Error Being Logged During Shutdown / Backup?
Jun 30, 2013Ever since I switched to LR5, I've been getting a Windows error being logged at random when I shut down and optimise/backup the catalogue. This isn't happening everytime, but it is happening quite reguarly - maybe 50% of the time. I don't notice anything untoward, and the backup all seems to be working as expected, but right before LR closes (in the last few seconds of the backup and optimisation process), Windows records that LR "stopped working" and gives me a 1000 Event ID error (seems to be a pretty generic code for any application failure). Event Viewer is implicating gdiplus.dll as being the cause of the error. Didn't ever get this in LR4.
Â
As I say, it doesn't actually seem to be causing any problem as such: LR is working fine and I wouldn't even know about this if I didn't keep an eye on things in Event Viewer/Reliability Monitor in Windows 7, so it's not a major issue. It is however annoying, and I hate to leave error messages like this unresolved. I've tried re-setting preferences, rebuilding all previews, clearing raw cache - no change. I'm wondering if the .dll file mentioned above might be corrupt - or if it's a bug.
Â
Maybe fellow Win7 LR users could check in their Reliability Monitor to see if it's been recording any errors (just type in "relia" into the Windows search box and you'll find it for those who don't know about this feature).
AutoCAD Inventor :: 2012 Freeze On Shutdown - Clean Install
Dec 2, 2011I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. Â All other programs work with no issue. All of the settings are default as installed.
So far I have tried:Â
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
Photoshop :: What Computer?
Apr 1, 2006just wondering, dont know if this has been asked before, but what type of computer does everyone use for their graphic design? Does everyone use Mac's?
Can we also please write the spec, i.e. ram, HD, graphics cards and screen size?
Just thought it would be interesting to see what people use in comparasion, and also im thinking of buying a new computer just for graphic/print design and wanted some tips!