After saving several times I am not able to open the last saved version of the file when I open it after unexpectedly shut down. All my saving is gone! Nice to use DROPBOX to upload my last saving. Why are inventor undoing all my saving?
View 4 Replieswhy the Punch i created causes the following?
1. The punch will not work with part 1.I have 4 points for the Punch on part-1
2. When attempting to get the 4 punch holes on to the flat sheet it causes inventor to shutdown.I have done 4 attempts to fit the punch into the flat sheet (part-1) and 4 times it has shutdown Inventor
I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. All other programs work with no issue. All of the settings are default as installed.
So far I have tried:
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
Recently upgraded from 2008 to 2013 (AC&IV) and now having the issue shown in the two attachments. Some of the leader text w/ iProps that had additional text added come thru ok, but straight iProps don't.
View 1 Replies View RelatedConcerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
Is there a known issue with inventor 2014 and STP file exports loosing their colour settings?
We export PCB's and assemblies to Altium PCB CAD tools as step files and have just noticed that the colours don't travel well at the moment! The assemblies just end up light grey/white. I tried an earlier stp export dated 2011 and that opened fine in Altium but not any 2014 exports.
When Daylight Savings did its change this spring I started having problems saving files in Illustrator. I will go to save files, mainly .eps format, and it crashes Illustrator. I have changed my time zone to a zone that has not switched yet due to Daylight savings, and it works. Unfortunately as I find a new time zone, it also ends up hitting Daylight Savings, and I am back to square one. I have been searching both the Adobe site and the Windows site to find an answer to my problem, but am having no luck.
My proper time zone is
(UTC-07:00) Mountain Time (US & Canada)
I have even tried using Saskatchewan as they do not follow Daylight Savings, but it also creates crashes. I have tried many other time zones, the two that have worked so far are
(UTC-06:00) Guadalajara, Mexico City, Monterrey (worked for a little while but a time change a few weeks later messed it up)
(UTC) Casablanca (working on this time zone now, but an alert on my computer says time change coming up on the 28th)
I feel like I am running out of time, as I am not sure how many more time zones will work.
I receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies View RelatedI've recently installed ACad13 and it shuts down on me at least once, sometimes twice a day - A message appears that says "Display driver fail to display". I have also installed 13 onto a brand new computer using Windows 7 (64 bit). Or is it a problem relating to the new pc - everything else seems to work ok on the computer
View 1 Replies View Related2012 LT about a year old, just recently started shutting off/closing unexpectedly during a drawing command (pline, copy, offset etc...) or when using numeric keys on keyboard. seems like everything else works ok. no error messages. nothing. just dissapears.
View 6 Replies View RelatedI am having problems with my acadlt.pgp file when I take my laptop home with me. I lose all hot key options and can only use the on screen icons, or I can do some commands (save, line, ect.) in longhand command. I was told by our I.T. guy to mention that it could be a "roaming profile" issue? How can I get my hot keys back when i'm disconnected from our work server?? This is actually becoming an occuring issue with others in our department as well.
View 1 Replies View RelatedUsing Full Autocad 2013, no extensions.I have a directory full of 25 drawings, P&ID's to be exact. I've done all the drafting on them, and I need to publish the set. I used to publish them 24x36 to our plotter, but we have started sending out large plot jobs, so I need to publish to PDF. This normally isn't a problem at all. I set up the first drawing's layout tab to print. Everything is good. Preview it, all is good.
I open the publish box, add all the drawings layouts, use the page setup from the first drawings layout, select publish to PDF, set them to go to my normal folder, and publish. The drawings all publish, and everything is correct except that they all, instead of centering on the page, they center horizontally but go to the bottom of the sheet vertically. So I have a two inch margin on the top of the drawing and .5 inch or so on the bottom. I'm assuming this means that the publish can't find the drawing extents (we use plot to extents, center plot). So I go into all the drawings, zoom extents in all the layouts, and still it publishes the same.
Is there a variable I'm missing? If I plot just one it works and the plot is dead center of the page, publish more than one and it doesn't work.
I'm trying to import Excel charts (from Excel Office Home and Student 2010) into Autocad LT 2009. I've been doing this for years without a problem using Excel 2003 but now that I've upgraded to Excel 2010, I loose a lot of formatting (line weights are different, fonts are jumbled). how I can import with Excel 2010? BTW, I tried the trial of Autocad LT 2012 and still had the problem.
View 3 Replies View RelatedI'm working in a locked viewport. Every time I move the view with the middle mouse, I lose the selection. Is there a way to change this?
View 5 Replies View RelatedI have a drawing from an outside source which was not drawn to scale, and dimensioned in MS.. When trying to scale the drawing to 1:1, the dimensions lose their contents. When looking at the properties, the contents of the override do not jive with what is actually shown, and any attempt to edit, move, copy/paste, or scale the dimensions will delete the contents. I have not come across anything like this before. Drawing attached...
weird dimensions.dwg
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
When i use AutoCad 2010, that is on a wind 7 OS, appear a message that indicate the next.
A software problem has caused autocad to close unexpectedly.
I have the new cs6 master collection and all programs work well and don't cause problems when I shut down my iMac except Photoshop. If I use photoshop, anytime I try to shut down my computer all I get is a spinning wheel and computer will never shut down. This happened on cs5 as well and thought newer version would fix problem but it has not.
View 2 Replies View Relatedmy CS2 shuts down when I try to open a raw file and sometimes in the middle of editing an image without warning and without saving any changes. I purchased a new Dell computer hoping it would solve the problem but it didn't. It's still happening with this new $6000.00 computer running Windows XP Pro. Is this a known issue and would an upgrade to CS3 resolve this matter?
View 1 Replies View RelatedI use DVIEW and my contour and slope labels shrink. I suspect the dreaded OE factor but cannot confirm.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
My CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies View RelatedI've been using CS4 on my macbook pro, I have Alien Skin plug ins that I use quite a bit. Recently, after using the Alien Skin actions, CS4 shuts down if I try to use them a second time. So, I open a photo, use the Alien Skin, continue to edit, but if I decide to use Alien Skin again, it shuts down CS4.
View 1 Replies View RelatedI have this strange problem with processes that are not stopping Because it is not stopping i cant open photoshop on a later time hours later because the program thiks it is running on the background somewhere i cant find it. After terminating the process photoshop.exe and retry it opens again.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 24567 MB
[code]....
photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies View RelatedI have Photoshop CS (version 8.0) running on Windows XP Home (SP3). I searched the help files, FAQs, and the forums and didn't find anything related to this.
Today I opened a document I've been working on, created a new layer, picked a default 9 pixel hard round brush, and when I clicked on the canvas to paint I got "could not complete the task due to a program error" and right after this Photoshop shut down.
I ran my anti-virus, but the computer is clean. I then checked all the brushes in my Photoshop folder to see if there were any odd ones in there - there weren't. Then I closed PS and when I opened it again I held down Shift+Ctrl+Alt to reset the Prefs file. I created a new document and reset the brushes, then I tried once again to paint with a default brush. Again I received the same program error and PS shut down.
I uninstalled PS and reinstalled the program. I restarted my computer and opened PS and tried painting again - the same error, only this time PS didn't shut itself down.
I'm at a loss here. I know Photoshop can have some psychotic moments, but this is the first time I have encountered this weird behavior. If anyone can give me some suggestions on what might be happening and how to remedy it I would appreciate it.
Since I installed LR4 my computer shuts down every time I am working in it. What could it be?
View 1 Replies View RelatedI have an intermittent problem with LR. I click to start and nothing happens. I have to go into Task Manager, Processes, find that LR is still active from the last time I used it, and shut it down, before I can restart the program. I never had this problem with LR 1,2,&3.
View 1 Replies View RelatedSuddenly a few weeks ago I can't do anything in Photoshop on my Mac without it unexpectedly quitting about a minute into waht I am doing.
I was using Photoshop CS2 9.0 in OX 10.5.8 .I did a disk repair,I took Photoshop off and reinstalled a few times.Upgraded to 9.1 and now 9.0.2
Process: Adobe Photoshop CS2 [2477]
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Identifier: com.adobe.Photoshop
Version: 9.0.2 (9.0.2x312 [20060822.902x312 02:00:00 cutoff]9.0.2x311) (9.0.2)
Code Type: PPC (Translated)
Parent Process: launchd [96]
[code]....
Why does my Photoshop CS5 keep quitting unexpectedly?
View 1 Replies View RelatedI just wanna know what happend?!
View 4 Replies View RelatedWhy is my ps3 quitting unexpectedly all the time?
View 5 Replies View Related