I have an intermittent problem with LR. I click to start and nothing happens. I have to go into Task Manager, Processes, find that LR is still active from the last time I used it, and shut it down, before I can restart the program. I never had this problem with LR 1,2,&3.
View 1 RepliesOn a couple assy's, I am trying to use pack&go to make self-contained versions of them.
Only problem is, the assy file (xxx.iam) and all sub-assy files are still linked to the component files in the original location even though the component files were copied to the new location with the P&G command
The whole point in this feature is to make self sufficient copies of something that don't depend on the original data.
This shows the settings I am using It is finding all the files ok. It just doesn't change the relationships on the new iam files. I could manually copy them and do the same thing this feature is doing.
Is there some hidden checkbox I need to find ? Note, I also tried once with "Include linked files" unchecked and got the same result.
Since I installed LR4 my computer shuts down every time I am working in it. What could it be?
View 1 Replies View RelatedI find it very inconvienent to have lightroom shutdown and restart every time I switch catalogs. I'm sure programing to eliminate that has got to be simpler than all the wonderful stuff we can do to our images.
View 16 Replies View RelatedEver since I switched to LR5, I've been getting a Windows error being logged at random when I shut down and optimise/backup the catalogue. This isn't happening everytime, but it is happening quite reguarly - maybe 50% of the time. I don't notice anything untoward, and the backup all seems to be working as expected, but right before LR closes (in the last few seconds of the backup and optimisation process), Windows records that LR "stopped working" and gives me a 1000 Event ID error (seems to be a pretty generic code for any application failure). Event Viewer is implicating gdiplus.dll as being the cause of the error. Didn't ever get this in LR4.
As I say, it doesn't actually seem to be causing any problem as such: LR is working fine and I wouldn't even know about this if I didn't keep an eye on things in Event Viewer/Reliability Monitor in Windows 7, so it's not a major issue. It is however annoying, and I hate to leave error messages like this unresolved. I've tried re-setting preferences, rebuilding all previews, clearing raw cache - no change. I'm wondering if the .dll file mentioned above might be corrupt - or if it's a bug.
Maybe fellow Win7 LR users could check in their Reliability Monitor to see if it's been recording any errors (just type in "relia" into the Windows search box and you'll find it for those who don't know about this feature).
When I use the fill tool to simply 'fill' a selection, it does not completely fill it. There is an ivisible barrier or line that prevents it from filling all the way to the edge. Do you think I have my settings wrong?
View 2 Replies View RelatedI was in the middle of editing when Lr3 froze up, I tried to restart, it prompted me to force quit Lr3 which I have done in the past. When I reloaded Lr3, my entire library was gone. 0 files.
View 1 Replies View RelatedI want to do a fresh install of LR3 but need to remove it from my iMac. How do I do this?
View 1 Replies View RelatedIt will shutdown frequently or sometimes not at all while i'm using Lightroom 3.6. I have Windows 7, 64 bit system, 2.80 GHz, 8 GB Ram.
Lighroom Info indicates that real memory used by Lightroom is 1.7%, Virtual memory used is 116.5 MB.
Fan seems to be ok, my system does not indicate any over heating issues. I also use Photoshop and various other heavy programs with no issues or shutdowns.
Since the latest update, my Lightroom 3 catalog has gone completely blank. Find Missing Pictures comes up empty. The photo files are still on my Drobo and show up on Bridge. Do I have to reimport 1000's of files? Why did this happen?
View 4 Replies View RelatedWorked fine until tonight... the export window completely vanished. I installed the 4.2 update, no luck. Restarted the computer, nothing. Uninstalled LR completely and re-installed it, still nothing. I can't view the window with the options regarding export, making it impossible.
View 9 Replies View RelatedI recently copied all my photos over to an external hard drive by "exporting as catalog". How do I set up another catalog in Lightroom 3 that will recogize my external hard drive so I can import and work directly on that external drive or do I have to create a new folder? I want to delete all the original RAW photos and JPEG photos from my laptops hard drive to clear up some space.
View 3 Replies View RelatedI still have lightroom 3 wich works great but a couple of weeks ago I got a problem with the spot removal tool. Short explanation, it's not the same.I don'd know what I did but I dont have the regular spot removel tool.WHen I shoot the spot removal tool the cursor dissapear when I get over the picture like it hides behind the image.When I click I get a very tiny circle and when I drag it makes an arrow. WHat is up with that?
now the spot removing tool is completely useless.
The Lightroom Library is missing many photos that are on my external Working Drive although very many are. I can't seem to find a wat to get the missing photos in the Library.
View 9 Replies View RelatedI'd like to create a totally custom page, inserting photos at various locations and sizes as well as text regions. Can this be done? I haven't been able to find a way to do this.
View 6 Replies View RelatedI have the new cs6 master collection and all programs work well and don't cause problems when I shut down my iMac except Photoshop. If I use photoshop, anytime I try to shut down my computer all I get is a spinning wheel and computer will never shut down. This happened on cs5 as well and thought newer version would fix problem but it has not.
View 2 Replies View Relatedmy CS2 shuts down when I try to open a raw file and sometimes in the middle of editing an image without warning and without saving any changes. I purchased a new Dell computer hoping it would solve the problem but it didn't. It's still happening with this new $6000.00 computer running Windows XP Pro. Is this a known issue and would an upgrade to CS3 resolve this matter?
View 1 Replies View RelatedMy CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies View RelatedI've been using CS4 on my macbook pro, I have Alien Skin plug ins that I use quite a bit. Recently, after using the Alien Skin actions, CS4 shuts down if I try to use them a second time. So, I open a photo, use the Alien Skin, continue to edit, but if I decide to use Alien Skin again, it shuts down CS4.
View 1 Replies View RelatedI have this strange problem with processes that are not stopping Because it is not stopping i cant open photoshop on a later time hours later because the program thiks it is running on the background somewhere i cant find it. After terminating the process photoshop.exe and retry it opens again.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 24567 MB
[code]....
photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies View RelatedI have Photoshop CS (version 8.0) running on Windows XP Home (SP3). I searched the help files, FAQs, and the forums and didn't find anything related to this.
Today I opened a document I've been working on, created a new layer, picked a default 9 pixel hard round brush, and when I clicked on the canvas to paint I got "could not complete the task due to a program error" and right after this Photoshop shut down.
I ran my anti-virus, but the computer is clean. I then checked all the brushes in my Photoshop folder to see if there were any odd ones in there - there weren't. Then I closed PS and when I opened it again I held down Shift+Ctrl+Alt to reset the Prefs file. I created a new document and reset the brushes, then I tried once again to paint with a default brush. Again I received the same program error and PS shut down.
I uninstalled PS and reinstalled the program. I restarted my computer and opened PS and tried painting again - the same error, only this time PS didn't shut itself down.
I'm at a loss here. I know Photoshop can have some psychotic moments, but this is the first time I have encountered this weird behavior. If anyone can give me some suggestions on what might be happening and how to remedy it I would appreciate it.
CS6 not only shuts down itself, it shuts down my computer. I have a high-end graphics card (which I specifically got to run my photo-editing monitor), i7 processor, Win8, 64-bit, high resolution. It always happens, without fail, when I choose a large size brush or whatever tool in cloning, spot-healing, dodging, burning, etc). Otherwise, it runs fine. But if I choose a large brush, etc, it only shows me a half circle instead of the full circle, freezes PS, shuts down my computer, and then the computer re-starts.
I used this same PS program on my previous Win7 64-bit computer, which had far less capability, processor, graphics, and other credentials than this current one. It has nothing to do with having other apps running because it happens regardless. It has nothing to do with Bridge because I don't use Bridge. It happens every time as described above. When the computer boots itself back up, there's an option for me to send the notice of the error to Microsoft, which I've done about 50 times. Could it have something to do with Win8? Hope not, because I checked before I (regrettably) got a computer with Win8 to make sure Photoshop was compatible with Win8.
When I try to print an image, Photshop completely shuts dow. What is going on?
View 5 Replies View RelatedI have had VSX5 shutdown completely without any error messages while in Share>Create Disc>DVD. I have no problems in the Add Media step. I add a Video File, MPEG2, in Add Media and change the Thumbnail to have the title of the clip. I click Next to go to Menu & Preview. I select a main menu from the gallery, select Hide Object for one of the provided texts in the main menu, and edit the PRJxxxx one. I select the Edit tab. Select Customize>Motion Filter and Zoom In and Out options. When I click OK to leave the Customize Menu, VSX5 completely shuts down without any error messages. This doesn't occur every time. I have also clicked OK, returned to the Menu & Preview window, and then clicked Preview. After clicking Preview, VSX5 has shutdown. I have also had the problem after selecting Navigation buttons in Menu & Preview and clicking OK. I have opened an incident with Corel support, and they asked if I had Service Pack 1 installed and if my software and drivers are up to date. I have Service Pack 1 installed and everything is up to date.
View 14 Replies View RelatedI receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies View RelatedI've recently installed ACad13 and it shuts down on me at least once, sometimes twice a day - A message appears that says "Display driver fail to display". I have also installed 13 onto a brand new computer using Windows 7 (64 bit). Or is it a problem relating to the new pc - everything else seems to work ok on the computer
View 1 Replies View RelatedPhotoshop CS6 shut down after using for 5mins; no image can display on canvas.
View 5 Replies View RelatedUsing clone stamp in CS6 (windows 7) repeatedly shutdown photoshop. What is causing this?
View 1 Replies View Relatedwhy the Punch i created causes the following?
1. The punch will not work with part 1.I have 4 points for the Punch on part-1
2. When attempting to get the 4 punch holes on to the flat sheet it causes inventor to shutdown.I have done 4 attempts to fit the punch into the flat sheet (part-1) and 4 times it has shutdown Inventor
After saving several times I am not able to open the last saved version of the file when I open it after unexpectedly shut down. All my saving is gone! Nice to use DROPBOX to upload my last saving. Why are inventor undoing all my saving?
View 4 Replies View Related