VideoStudio :: X5 Intermittent Shutdown During Menu And Preview?
Oct 27, 2012
I have had VSX5 shutdown completely without any error messages while in Share>Create Disc>DVD. I have no problems in the Add Media step. I add a Video File, MPEG2, in Add Media and change the Thumbnail to have the title of the clip. I click Next to go to Menu & Preview. I select a main menu from the gallery, select Hide Object for one of the provided texts in the main menu, and edit the PRJxxxx one. I select the Edit tab. Select Customize>Motion Filter and Zoom In and Out options. When I click OK to leave the Customize Menu, VSX5 completely shuts down without any error messages. This doesn't occur every time. I have also clicked OK, returned to the Menu & Preview window, and then clicked Preview. After clicking Preview, VSX5 has shutdown. I have also had the problem after selecting Navigation buttons in Menu & Preview and clicking OK. I have opened an incident with Corel support, and they asked if I had Service Pack 1 installed and if my software and drivers are up to date. I have Service Pack 1 installed and everything is up to date.
View 14 Replies
ADVERTISEMENT
May 1, 2013
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC
View 3 Replies
View Related
May 27, 2013
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
View 6 Replies
View Related
Jan 13, 2014
I'm trying out the new Adobe Edgee CC and I have the trial version. I am unable to preview any of my animations. When I try to an IE window opens but nothing happens.
View 6 Replies
View Related
Oct 12, 2012
I installed a bunch of fonts and ever since then Photoshop has been crashing when the font preview menu is accessed with the type tool. So I deleted all fonts except for the required system fonts I believe. But it still crashes when I access the font preview menu. I can't provide a crash log now.
View 13 Replies
View Related
Jan 22, 2008
am currently working on a Flash site which is relying quite heavily on images with transparency.
my method has been to create PS3 images, save as TIFF, preserve transparency, and then import into Flash. However sometimes when I go to save, I do not get the TIFF options dialogue box, and when this happens Flash cannot import the image.
I found this quote on another post which might be related, but I do not know enough about photoshop to understand it!:
"Keep in mind that before you will have a transparency option when saving, you need to have either a clipping path or an alpha channel saved with the transparency info in it. (aka a mask)"
is this what I am not doing, and if so, how do create a clipping path or alpha channel to save my transparency info 'in'?
At the moment I seem to be able to get around the problem by opening a new image, dragging the layer into that, and then saving. but it's a pain in the arse and for some of them, I need to preserve the position of a layer more accurately...
View 1 Replies
View Related
Mar 24, 2009
In Photoshop CS4 the paint deposited by a brushstroke by a Wacom Intuos3 pen tool intermittently and unpredictably just stops mid-stroke after some while of a continuos stroke. This is a real problem when making simulated watercolor washes because these require a continuos application of paint using a brush with Wet Edges. When the paint just stops and the pen tool is removed from contact and then re-contacted, the paint starts again but now the new brushstroke sits on top of the old stroke and does not merge into it (as you want with a watercolor wash).
No brush controls are set to Fade and in any case the ink-stopping happens well into the continuos stroke - much later than a Fade control would affect it.
I'd be grateful for advice on how to stop this happening, please. Why is the paint flow just stopping? Is this a known problem with CS4?
CS4 is fine in other respects.
System:
Intuos 3 with Grip Pen and latest driver; Vista Ultimate 64 bit; Photshop CS4 64 bit; Q9550 cpu; 8 Gb ram; x2 WD velociraptor hdds; ATI Gigabyte 4850 graphics card with 1 Gb ram and 9.3 driver; Asus Xonar D2X sound card.
View 4 Replies
View Related
Dec 11, 2012
I notice the tranparent background flashing intermittently when I zoom or use any of the functions like layers, levels etc. I am using a new Win 8 system and have updated both photoshop CS6 and my video card drivers.
View 2 Replies
View Related
Oct 12, 2011
I have been experiencing an intermittent problem with printing from my AutoCAD program.
Around 80% of my plotting tasks are sent to the printer and print correctly.
The other 20% print but only partially (they get anywhere from 1/3 to 2/3s through the plotting process then the remainder of the drawing is blank).
There does not seem to be any consistency to the fault i.e. it happens on different drawing files at different times.
When it does occur, there is nothing I can do to correct it. I have tried shutting all other programs down and doing no further work whilst the print is in progress but to no avail.
This is only a problem with AutoCAD and only some of the time.
View 4 Replies
View Related
Mar 30, 2012
I've written a piece of code in C++ to open a part in Inventor and get parameter data from the part from out-of-process. This code works, but occasionally (i.e. randomly) execution of the code will result in an error message being returned from Inventor which indicates a crash of the program. I cannot figure out why, and because the problem occurs randomly I've had difficultly isolating the problem. Here is my code. The error suggests that I might be releasing memory that I don't own or something like that, but since it happens intermittently it is hard to know.
int error;CComBSTR bsPartName;CLSID clsid;FILE *out;HRESULT hres = NOERROR;TCHAR szFileName[255];/* Global Autodesk Inventor pointers */CComPtr<Application> aiApp;CComPtr<Document> aiDoc;/* Get Inventor program ID
[Code]....
View 1 Replies
View Related
Jan 17, 2014
The standard symbol for a stream on topographic maps is a blue line.
The standard symbol for an intermittent stream on topographic maps is a a blue line, with long segments interrupted regularly with a series of three dots. I can create a dashed line interrupted by two dots, but there aren't enough boxes for me to specify the third dot.
View 4 Replies
View Related
Mar 24, 2012
I have been experiencing an intermittent crash of Photoshop CS5 in Windows 7 when saving. I cannot effectively reproduce the problem and am having difficulty diagnosing the cause of the it. I have updated Photoshop to 12.0.4.0 and still experience the crash.
Hardware:
AMD Phenom II X4 965 3.4GHz
8GB RAM
AMD Radeon HD 5450
Software:
Windows 7 Home Premium Version 6.1 (Build 7601: Service Pack 1)
Photoshop CS5 12.0.4 x64
View 8 Replies
View Related
Jan 3, 2014
Product: AutoCAD 2014
OS: Windows 7 64bit
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
View 5 Replies
View Related
Jul 28, 2012
Recently purchased Corel X5. I really like the editor and find it intuitive, fast, and stable, but the program that creates DVDs is giving me fits with a long list of issues. One of the main issue I have is that when I go to preview a DVD, more than half of the time the program immediately aborts and kicks me entirely out of Corel. I end up having to re-start Corel, go back into the DVD creation portion, and try again. Eventually, the preview works. If I don't close the DVD program and then save the project in the editor before running the preview and it aborts, I lose my changes, so I have to constantly go back to the editor and save my project when working on a DVD menu.
View 2 Replies
View Related
Jul 15, 2013
Downloaded trial version, seems to have issues with the editor. Clip playback ok but when I try to do a project playback, it hangs after a few seconds of play back and then only creeps forward a second or two every time I attempt to hit play to have it continue through to the end. I use other video editing programs, never encountered this kind of issue. Cool effects but if the editor doesn't function right, what's the point.
I am running a new ASUS, windows home premium 64bit and have 6GB ram.
View 1 Replies
View Related
Dec 14, 2010
I test at the moment Videostudio X3 and made a small test project. If i produce a AVCHD project i don't have a preview by rendering this project and i can't find a option to enable this ?
View 4 Replies
View Related
Feb 22, 2012
I am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
View 1 Replies
View Related
Oct 25, 2011
I have installed Corel VideoStudio Pro X4 (32bit version) on my Win7 64Bit laptop.But when I easy playback, preview, 2 tracks with a Crossfade the preview slowdown. I remeber X3 on the same laptop works fine.
[edit]
VIDEO properties
extention .MTS
PAL HDMV
H.264Video, Upper Field First
24 bits, 1920 x 1080, 16:9
25 frames/sec
[/edit]
View 14 Replies
View Related
Nov 13, 2007
I've just downloaded VS11 plus TBYB and now I`m trying to make some DVD disk. All is o.k. but i can not see the disc preview.All i see on the black "preview window" is the record "Press "Play" button to start preview" .After i press the button i see the progress bar shortly and nothing more happens.
View 5 Replies
View Related
Mar 18, 2013
I have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
View 9 Replies
View Related
Jun 5, 2012
I have this problem in X4 and also in X5. When I load MP4 files from my HD camcorder I can preview the clips fine. When I drop them into the timeline, and play the project, the clips are mostly pixelated. When I open other projects that I created in X4 last year using the same type type of mp4 files, I see no pixelation in the project preview. All of these mp4 files are using smart proxy.
View 5 Replies
View Related
Jan 18, 2012
I've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details.
Operating system: Windows 7 Home Premium
VideoStudio Pro x2 - downloaded the patch
Project Properties:
NTSC
6.73 KB
37:31 minutes long
Still images are jpeg
videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI?
Microsoft AVI files
24 bits, 704 x 480
frame-based
4:3
MJPEG Compressor - should this be something different?
PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked
apply anti-flickering checked
View 4 Replies
View Related
Oct 6, 2013
After I successfully imported some videos into VideoStudio, I tried to preview them. Originally, the video preview was taking a quarter of the screen. It is still the case, but when I start playback, now the video size becomes half of this (half ot the quarter screen preview). I am searching since half an hour without any success for a solution. Google always return me PDF documents describing main features of Corel VideoStudio as well as reviews of the product. I thought this could be related to the fact project properties are set to output video at 480p, but I cannot set the project properties to HD. The HD option is just not there. Seems VideoStudio X6 Pro can only work for DVD projects and upconvert to HD after the fact. I found some page showing how to configure project as HD, but the layout of the options does not correspond to VideoStudio X6. Could this be because X5 had HD and X6 has not? Would be quite surprising. Seems I really have to ask support from Corel, seems an unknown undocumented issue, but I am now outside the 90-day warranty period and don't want to pay to be told to reformat my computer. So I will try other software, be pissed off during weekends and weekends and probably end up trying with another computer or asking a friend with a Mac to do the editing for me with Final Cut (and literally wait MONTHS to get a single 30-minute video).
View 3 Replies
View Related
Oct 6, 2011
When i want to record from tv/tuner card from vcr (smi grabber) my preview screen go's black. It records but i only hear the sound. No video preview. But it is recorded with video and audio. When i only play the vcr the video preview works in corel.
View 2 Replies
View Related
Jul 30, 2011
No video preview during capture and did not see a cure to the problem. I just installed and updated VS X4 on Windows 7 and have the same problem. The capture goes perfectly it just does not show a preview on the screen. I tried capturing in Windows Movie Maker and it shows a preview while capturing
Direct X upto date preference set to window preview.
View 4 Replies
View Related
Sep 19, 2008
Can not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
View 5 Replies
View Related
Aug 24, 2011
I just started using the new x4 version of VS and I noticed the playback on the preview window is very choppy. I have Pinnacle Studio HD, Sony Vegas Pro & of course Premiere CS5 installed to compare between them all, and don't have that problem, even with effects or anything added. Is there an option somewhere I'm missing? I've tried different video types and it doesn't seem to matter. The main one I'm trying is a 1280x720 AVI file I recorded.
Checked and unchecked the "Hardware Acceleration" ticks, no difference either way.
Checked DirectX....up to date.
Checked graphics drivers...up to date.
View 7 Replies
View Related
Dec 1, 2011
Why do I allways have a 4:3 preview window ? Although the captured movie is of the correct AR, 16:9
View 14 Replies
View Related
Aug 9, 2010
All I want to do is transfer some video files to DVD. I do not want any of Corel's menus to appear: I just want to put the DVD in a player and have the video start playing.
View 14 Replies
View Related
Mar 7, 2012
I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies
View Related
Jun 17, 2013
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
View 9 Replies
View Related
