I have installed Corel VideoStudio Pro X4 (32bit version) on my Win7 64Bit laptop.But when I easy playback, preview, 2 tracks with a Crossfade the preview slowdown. I remeber X3 on the same laptop works fine.
[edit]
VIDEO properties
extention .MTS
PAL HDMV
H.264Video, Upper Field First
24 bits, 1920 x 1080, 16:9
25 frames/sec
[/edit]
I am running a Q6600 quad core with 4gb ram, Windows XP Pro 32bit. Video card is Nvidia 8600GT 512mb with latest driver 1.8250 & have latest update of CS4 11.0.1.CS4 works fine for me for 40 - 60 mins or so & then starts to slow down. It gets to the stage where any selection tool is unusable. As ann extreme example, today I had been working on an image, then went to do something else for an hour or so, but left cs4 running with the image open, came back & 1 click of the quick selection tool resulted in a progress bar that took around 30 seconds to complete. If I shutdown cs4 & restart its fine again for a while. So it seems like some sort of memory leak.I have noted also that the enable Open GL option is greyed out. I tried resetting CS4 preferrences, but still greyed out. I had previously tried the DisallowOpenGL Windows_on patch from adobe, but found it made no difference so ran the DisallowOpenGLWindows_Off patch.I cant honestly remember if the openGL option was always greyed out or notI know there are lots of CS4 slow threads around, but I hadnt come across a thread on my version of the problem, where cs4 works ok for a while & then slows down.
View 9 Replies View RelatedI've just starting experiencing a tremendous slow-down in the viewport (Nitrous, Quadro 4000) . . . and discovered that the trajectory being displayed in the object properties is causing it. When I turn it off, everything runs as expected.
View 2 Replies View RelatedFor some unknown reason i get a slowdown when using RGB color mode, brushes, even 1px sized brushes trail behind the cursor and makes it rather slow and rather problematic to draw and paint.When i change to any of the other modes, greyscale, cmyk, etc; this slowdown doesn't occur at all which results in no slowdown.
Yesterday, painting with 1000px brushes in rgb mode didn't even give a noticeable slowdown which is very weird. So the issue has to have happend today.
I got
Intel core i5 2.5Ghz
8,00 gb Ram
64bit
AMD Radeon HD 7670M 2gb ram 900Mhz
on photoshop Cs5/Cs5.1
The program slows to a crawl when sending print merge jobs. Nothing else on the computer does this.
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
After eagarly installing the CS4 extended trial (on vista x64...) (and yes I should have seen it coming, as it does with every new release...) I was extremely dissapointed to find that, well, it doesn't really work.
It loads fine, images load, but as soon as I try and use a tool, zoom, scroll, paint, etc... I get a huge lag/slowdown. For example, rotating the canvas becomes slow and horribly jumpy, brushes lag a few seconds behind my cursor....
I have so far only heard from one other user who is experiencing a similar problem and I cannot understand it. My PC is surely up to standard (see sig links for details) and the only thing I can think of is that vista 64 is working its usual magic. My drivers are up to date and I've played around with the RAM and open GL settings in both ati catalyst and CS4 but have got nowhere.
I've been experiencing some slowdown on my PC when exporting files from LR4. No matter the size, or if it's .jpg or .TIFF... it always gives me some frezzes (mouse etc)
CPUMotherboardGraphicsRAMPhenom II X6 1055T @4.0ghz ASUS Crosshair FORMULA IV CrossFire ATI RADEON 6850 940/1150 8GB DDR3 CORSAIR VENGANCE @1525mhzHard DriveOSMonitorSamsung 500GB / Seagate 500GB / Seagate 1TB Windows 7 ULTIMATE x64 Dell U2410 IPS Lastest ATI driver...
I am using Gimp for years now, and few days ago I have updated to latest 2.8 version. However, since the update (more like clean installation than update) to 2.8 I am experiencing extreme slowdown while moving image around with middle mouse button (wheel) or with the button on my tablet's pen. The image gets thorn apart a Gimp freezes for about 10-15 seconds. The thing is, this only happens with 2.8 version (never happened with 2.6) and only while I am using middle mouse button (wheel), or the button on my tablet's pen, for moving around. If I use "Navigate" cross at bottom right, I can move the picture without any tearing and slowdown/freeze.
View 7 Replies View RelatedRecently purchased Corel X5. I really like the editor and find it intuitive, fast, and stable, but the program that creates DVDs is giving me fits with a long list of issues. One of the main issue I have is that when I go to preview a DVD, more than half of the time the program immediately aborts and kicks me entirely out of Corel. I end up having to re-start Corel, go back into the DVD creation portion, and try again. Eventually, the preview works. If I don't close the DVD program and then save the project in the editor before running the preview and it aborts, I lose my changes, so I have to constantly go back to the editor and save my project when working on a DVD menu.
View 2 Replies View RelatedDownloaded trial version, seems to have issues with the editor. Clip playback ok but when I try to do a project playback, it hangs after a few seconds of play back and then only creeps forward a second or two every time I attempt to hit play to have it continue through to the end. I use other video editing programs, never encountered this kind of issue. Cool effects but if the editor doesn't function right, what's the point.
I am running a new ASUS, windows home premium 64bit and have 6GB ram.
I test at the moment Videostudio X3 and made a small test project. If i produce a AVCHD project i don't have a preview by rendering this project and i can't find a option to enable this ?
View 4 Replies View RelatedI am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
I've just downloaded VS11 plus TBYB and now I`m trying to make some DVD disk. All is o.k. but i can not see the disc preview.All i see on the black "preview window" is the record "Press "Play" button to start preview" .After i press the button i see the progress bar shortly and nothing more happens.
View 5 Replies View RelatedI have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
I have this problem in X4 and also in X5. When I load MP4 files from my HD camcorder I can preview the clips fine. When I drop them into the timeline, and play the project, the clips are mostly pixelated. When I open other projects that I created in X4 last year using the same type type of mp4 files, I see no pixelation in the project preview. All of these mp4 files are using smart proxy.
View 5 Replies View RelatedI've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details.
Operating system: Windows 7 Home Premium
VideoStudio Pro x2 - downloaded the patch
Project Properties:
NTSC
6.73 KB
37:31 minutes long
Still images are jpeg
videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI?
Microsoft AVI files
24 bits, 704 x 480
frame-based
4:3
MJPEG Compressor - should this be something different?
PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked
apply anti-flickering checked
After I successfully imported some videos into VideoStudio, I tried to preview them. Originally, the video preview was taking a quarter of the screen. It is still the case, but when I start playback, now the video size becomes half of this (half ot the quarter screen preview). I am searching since half an hour without any success for a solution. Google always return me PDF documents describing main features of Corel VideoStudio as well as reviews of the product. I thought this could be related to the fact project properties are set to output video at 480p, but I cannot set the project properties to HD. The HD option is just not there. Seems VideoStudio X6 Pro can only work for DVD projects and upconvert to HD after the fact. I found some page showing how to configure project as HD, but the layout of the options does not correspond to VideoStudio X6. Could this be because X5 had HD and X6 has not? Would be quite surprising. Seems I really have to ask support from Corel, seems an unknown undocumented issue, but I am now outside the 90-day warranty period and don't want to pay to be told to reformat my computer. So I will try other software, be pissed off during weekends and weekends and probably end up trying with another computer or asking a friend with a Mac to do the editing for me with Final Cut (and literally wait MONTHS to get a single 30-minute video).
View 3 Replies View RelatedWhen i want to record from tv/tuner card from vcr (smi grabber) my preview screen go's black. It records but i only hear the sound. No video preview. But it is recorded with video and audio. When i only play the vcr the video preview works in corel.
View 2 Replies View RelatedNo video preview during capture and did not see a cure to the problem. I just installed and updated VS X4 on Windows 7 and have the same problem. The capture goes perfectly it just does not show a preview on the screen. I tried capturing in Windows Movie Maker and it shows a preview while capturing
Direct X upto date preference set to window preview.
Can not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
I just started using the new x4 version of VS and I noticed the playback on the preview window is very choppy. I have Pinnacle Studio HD, Sony Vegas Pro & of course Premiere CS5 installed to compare between them all, and don't have that problem, even with effects or anything added. Is there an option somewhere I'm missing? I've tried different video types and it doesn't seem to matter. The main one I'm trying is a 1280x720 AVI file I recorded.
Checked and unchecked the "Hardware Acceleration" ticks, no difference either way.
Checked DirectX....up to date.
Checked graphics drivers...up to date.
Why do I allways have a 4:3 preview window ? Although the captured movie is of the correct AR, 16:9
View 14 Replies View RelatedI'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies View RelatedI am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
I just upgraded to windows 7 and now there is a blank preview window when I try to capture. I have tried capturing in both DV and DVD and no preview. I am capturing via firewire from a VHS. This worked perfectly under windows xp but is not working under 7. It seems that it does capture but I cannot preview in order to find my spot on the tape.
View 6 Replies View RelatedHave just installed VSx4 trial version. I previously used x3 with no problems. I've created a new project, imported an AVI and it plays fine in the preview window, in either Clip or Project mode. However, as soon as I pause it the image goes black.
This makes any kind of editing nearly impossible. I don't get the problem with the pre-installed sample video "V21". So I guess it is clip related? It plays and pauses fine in media player.
I am running Windows XP, and using Videostudio 11. I know I used to have the DIsable Audio Preview button available when capturing. I have not used the software in about a year and now the button is not available for me to turn off from the capture screen. How can i turn that off? I find that during capture i get less a chance of dropped frames if i turn off the Audio Preview.
View 1 Replies View RelatedI know those are almost opposites, but is there a way to allow VSPro to somehow pre process the video such that my preview runs more smoothly and with high resolution (or at least more smoothly).
I have a decent box and am trying to process 1080p clips. It seems to run smoothly after I create a file (in the preview window), but is there a way to have it do that without going to step 3 ("Share")?
Situation - running VS10 and have been for a while now. However for some reason recently I've failed to manage to capture video from my Panasonic NV-GS11 mini-DV. The error is simply "Failed to build a preview graph".
I've checked and re-installed the VS10 SP1, as well as the Vista patch someone mentioned in one topic here I did find, but so far no change. I'm just a bit leery of something that has worked fine in the past, but for some reason that's changed...
I am using VideoStudio Pro X3, and am having a lot of difficulty with the preview window.
When I play the video I have been working on, it runs the video at about 1 frame per second or so, and renders the program useless. The odd thing is, when I select an individual clip and click run, it runs at a proper frame rate.
Is there some sort of codec or driver that I am missing?
I have come across - the 1st time - a series of mpg video clips which, assembled into a project file on a 3rd party usb memory stick, irregularly freezes the preview image and sound while playing, usually in the 1st or 2nd clip in the file. Searching for a reason, I have played the file on two machines across both usb2 and usb3 connections, and using different versions of VS, and the freezing of the play occurs in all of them. At different places in successive events. The same thing happens with individual clips in VS, and individual clips in other video player software like media player and VLC.
I've no reason to believe that the software or even the files are causing this. At least, not yet. The only common element seemed to be the memory stick, so I copied the files from the 3rd party item to one I know is usb3, opened the project file and after re-linking, played it. Same thing happened in the 3rd clip. The results to date suggest that the player software (any of them) in doing the background data load from the memory stick at some point is taking too long, and thus the freeze. Which led me to review the file formats and size.
The freezing files are interesting - mpg format, but way bigger than I had expected for the duration involved. For example, one of the freezing ones is 1min18sec duration and 99,791Kb in size. Compared to a 51sec 22,224Kb file taken on a different camcorder. The duration versus size differences are substantial (for only a 27 sec duration difference the size difference is nearly 5 times), and one wonders why? Both of them loaded into VS show as MPEG-1 format on a right click properties display.
As far as I am aware, mpeg-1 is the same as avi format, and mpeg-2 and mpeg-4 are compressed and thus smaller versions of the same file length without loss of quality. Why mpg file should freeze during play in VS X6, X5, media player and VLC, on a desktop and a separate laptop machine?