GIMP :: Slowdown / Freeze While Moving Image?
May 21, 2012
I am using Gimp for years now, and few days ago I have updated to latest 2.8 version. However, since the update (more like clean installation than update) to 2.8 I am experiencing extreme slowdown while moving image around with middle mouse button (wheel) or with the button on my tablet's pen. The image gets thorn apart a Gimp freezes for about 10-15 seconds. The thing is, this only happens with 2.8 version (never happened with 2.6) and only while I am using middle mouse button (wheel), or the button on my tablet's pen, for moving around. If I use "Navigate" cross at bottom right, I can move the picture without any tearing and slowdown/freeze.
View 7 Replies
ADVERTISEMENT
Mar 22, 2012
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
View 1 Replies
View Related
Jan 29, 2014
I need to assemble multiple images in an illustration program (inkscape or illustrator for example). So I want to cut and paste several regions from different images, but I want them to all be exactly the same size. What I had been doing in photoshop was just dragging the selection from one open image to the other and that would preserve the size so I could copy again, but that doesn't seem to work in GIMP, or rather, nothing I tried seems to work.
How can I get a selection to be identically sized between different images without actually moving any part of the image itself?
View 3 Replies
View Related
May 22, 2012
Ive copy and pasted into an image and i thought i got it where i wanted so i saved it and exited the program. But then i realised that the image i pasted was a few pixels off. I have been trying to select a portion of the image and move it to where i want it but cant find how. Ive selected the portion and clicked on move then selection but it moves the selection area not the image within it.
View 1 Replies
View Related
Sep 17, 2013
When I move my mouse over my image the brush cursor is not moving and it will not let me click on my image (with the mouse) the crosshair/cursor will follow it, however the brush will not, nor will any other tools, my wacom tablet however works fine.
I thought it must be something to do with GIMP accepting input but its not going as of yet.
View 2 Replies
View Related
Dec 30, 2012
it seems to only be doing this on 50 x 0 in 72dpi unnamed (not given an extension yet) pictures!!! every time I have a picture of that size and I bring down ANY menu (such as 'edit') it causes Gimp to be unstable and freeze and I lose EVERYTHING in ALL pictures I have up after closing the nonresponsive process!
View 1 Replies
View Related
Jul 18, 2011
Since installing X3 I edit an image ... save and then try to open another image and the program freezes ... everytime. I have to end the process and restart the application. Never had this problem with Paint Shop Pro previous versions. I'm very close to uninstalling and asking for a refund. The install and patches ran fine. Running on XP SP3 ... 3+GHz machine with 4 MB RAM ... Dual Core.
There is no error message. I can see the progam in task manager using 25% CPU with memory usage climbing. I've waiting several minutes and the program does not return.
View 4 Replies
View Related
Apr 25, 2013
I'm having an issue where the more I zoom into a drawing that has a raster image (a 1mb jpg) in it, regenerating times become increasingly long until the whole program just freezes. When I zoom back out, it's fine.
I've tried changing the file type, saving it with a different program, lowering the quality to Draft, zooming in on an area that the raster image wasn't in, lowering the DPI of the image, nothing works. I've spent the last two hours searching Google for a fix, found nothing. The only thing that seems to work is if I put the image on a layer and freeze it. The problem there is, I'm tracing over the image, so it being invisible makes it rather difficult to work with.
View 2 Replies
View Related
Oct 25, 2011
I have installed Corel VideoStudio Pro X4 (32bit version) on my Win7 64Bit laptop.But when I easy playback, preview, 2 tracks with a Crossfade the preview slowdown. I remeber X3 on the same laptop works fine.
[edit]
VIDEO properties
extention .MTS
PAL HDMV
H.264Video, Upper Field First
24 bits, 1920 x 1080, 16:9
25 frames/sec
[/edit]
View 14 Replies
View Related
May 7, 2009
I am running a Q6600 quad core with 4gb ram, Windows XP Pro 32bit. Video card is Nvidia 8600GT 512mb with latest driver 1.8250 & have latest update of CS4 11.0.1.CS4 works fine for me for 40 - 60 mins or so & then starts to slow down. It gets to the stage where any selection tool is unusable. As ann extreme example, today I had been working on an image, then went to do something else for an hour or so, but left cs4 running with the image open, came back & 1 click of the quick selection tool resulted in a progress bar that took around 30 seconds to complete. If I shutdown cs4 & restart its fine again for a while. So it seems like some sort of memory leak.I have noted also that the enable Open GL option is greyed out. I tried resetting CS4 preferrences, but still greyed out. I had previously tried the DisallowOpenGL Windows_on patch from adobe, but found it made no difference so ran the DisallowOpenGLWindows_Off patch.I cant honestly remember if the openGL option was always greyed out or notI know there are lots of CS4 slow threads around, but I hadnt come across a thread on my version of the problem, where cs4 works ok for a while & then slows down.
View 9 Replies
View Related
Jul 11, 2012
I've just starting experiencing a tremendous slow-down in the viewport (Nitrous, Quadro 4000) . . . and discovered that the trajectory being displayed in the object properties is causing it. When I turn it off, everything runs as expected.
View 2 Replies
View Related
Jun 29, 2013
For some unknown reason i get a slowdown when using RGB color mode, brushes, even 1px sized brushes trail behind the cursor and makes it rather slow and rather problematic to draw and paint.When i change to any of the other modes, greyscale, cmyk, etc; this slowdown doesn't occur at all which results in no slowdown.
Yesterday, painting with 1000px brushes in rgb mode didn't even give a noticeable slowdown which is very weird. So the issue has to have happend today.
I got
Intel core i5 2.5Ghz
8,00 gb Ram
64bit
AMD Radeon HD 7670M 2gb ram 900Mhz
on photoshop Cs5/Cs5.1
View 2 Replies
View Related
Apr 14, 2008
The program slows to a crawl when sending print merge jobs. Nothing else on the computer does this.
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
View 3 Replies
View Related
Nov 14, 2008
After eagarly installing the CS4 extended trial (on vista x64...) (and yes I should have seen it coming, as it does with every new release...) I was extremely dissapointed to find that, well, it doesn't really work.
It loads fine, images load, but as soon as I try and use a tool, zoom, scroll, paint, etc... I get a huge lag/slowdown. For example, rotating the canvas becomes slow and horribly jumpy, brushes lag a few seconds behind my cursor....
I have so far only heard from one other user who is experiencing a similar problem and I cannot understand it. My PC is surely up to standard (see sig links for details) and the only thing I can think of is that vista 64 is working its usual magic. My drivers are up to date and I've played around with the RAM and open GL settings in both ati catalyst and CS4 but have got nowhere.
View 1 Replies
View Related
Apr 26, 2012
I've been experiencing some slowdown on my PC when exporting files from LR4. No matter the size, or if it's .jpg or .TIFF... it always gives me some frezzes (mouse etc)
CPUMotherboardGraphicsRAMPhenom II X6 1055T @4.0ghz ASUS Crosshair FORMULA IV CrossFire ATI RADEON 6850 940/1150 8GB DDR3 CORSAIR VENGANCE @1525mhzHard DriveOSMonitorSamsung 500GB / Seagate 500GB / Seagate 1TB Windows 7 ULTIMATE x64 Dell U2410 IPS Lastest ATI driver...
View 4 Replies
View Related
Feb 11, 2014
Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
View 5 Replies
View Related
Aug 1, 2011
I have ubuntu natty and gimp 2.7.3. Whenever I click the docks they won't move.
View 2 Replies
View Related
Dec 27, 2013
I am using GIMP 2.8 on a MacBookPro with OSX 10.8.
I want to cut and move a selection (and, if at all possible, preserve and then enlarge the selection rectangle to perform a subsequent cut and move operation.)
I've got a graphic, let's say it's a 10x10 pixel square in black. What I want to do is to add a vertical column of white pixels in between every existing column of the image.
What I thought to do is the following: first, enlarge the canvas to twice the width of the image, so 20Wx10T (original image on left, blank extension on right). Now select the rightmost column of pixels and move the contents of the selection one pixel to the right. Extend the left edge of the selection rectangle 2 pixels to the left, to include the newly "blank" column and the next column of the image. Move new selection and contents one pixel to the right, and so on, until the expanded canvas is filled and there are 'blank' columns between every column of pixels in the original image.
However, I am unable to find a way to move the selection and its contents. I've tried every combination of secret handshake I can think of, but none work. I'm able to move the selection and essentially duplicate it in another location, but not by cutting it and moving it somewhere else, leaving the initially selected area blank.
View 5 Replies
View Related
Aug 16, 2012
Upon inserting a .xcf drop-shadowed image into another .xcf image - by selecting Open As Layers - it inserts fine, but when I select the Move tool to move the image, the drop shadow doesn't move with the image. I tried selecting the drop-shadow layer from the layers - channels, paths area, but when I do that, and then try to move the drop shadow, instead of the drop shadow moving - when I select it, the entire background moves.
View 1 Replies
View Related
Jun 15, 2013
I have my background image, with some text which I created. I wanted to add some external images into the canvas.
When I open the image as a layer, it imports fine. But when I attempt to move it (holding ALT), it stays in the same place.
View 3 Replies
View Related
Nov 28, 2012
I have a photo where branches above the main image intrude too much.
i would like to move them up to the top of the picture.
So far the only way I have found to move them leaves me with a white space that I need to fill in.Is there any other way to do it.
View 1 Replies
View Related
Nov 17, 2012
I am having a hard time trying to add a logo to a picture. I open the picture, then I open the logo as a layer and it pops into the center of the photo. Problem is, I don't want it positioned in the center, so how do I select it and move it around to where I want it? Even when the layer is highlighted I can't figure out which tool will let you grab it.
View 2 Replies
View Related
Mar 26, 2013
I have watched another person move a signature from one location to another and then clone the area where he took it from. This was so that I could crop a painting for print to fit a certain size and needed to. It will happen quite a bit for me, as artists sign fairly close to the bottom edge generally.
View 5 Replies
View Related
Oct 9, 2013
I'm trying to move text in a PSD file that I opened in Gimp. I've recorded a Screencast video here, (removed link because image is not quite ready to be shared with the outside world;-) which shows what I'm trying to do.
Basically, I have a line of text which is several layers deep that says "IS THE NORM". I need to move the word "the" over to the left a little because it's a little too close to the word "norm".
However, when I select it and Cut, nothing happens. I tried locking the layer, even though I don't really know what that means - just saw it on YouTube and figured I'd try it - but no luck.
View 4 Replies
View Related
Apr 22, 2007
To make this you will need a very basic understanding of the workings of GIMP, as well as have GAP.Download GAP here. This has been made after many tweaks and changes from this tutorial, anything related to that tutorial on this tutorial I give him credit for (This includes the main method of fire creation and the colors) I also give much credit to ccbarr for finding a way to keep an even and never skipping fire :)
First create a new 500x100 transparent image.Then set the foreground color to #ff8400 (orange) and the background color to #000000 (black).Then select the gradient tool on "The GIMP" window, use the gradient 'FG to BG (RBG)' and make a gradient from the very bottom to the very top of the Background layer.
Now, make a new window (File -> New). Use the parameters 500x200.Go to Filters -> Render -> Clouds -> Solid Noise and use the following settings on the Layer you just created.
Now Create another Layer just like the last one, but this time named "Upper Flame".Do another Solid Noise, Filters -> Render -> Clouds -> Solid Noise, using the following Settings.
think it makes it look better. Select the upper flame layer and go to Layer -> Colors -> Colorize and click on the 'Hue' bar, and send it about halfway between the middle and the right side, to give the fire a redder look. For the reddest effect push that bar all the way to the right
View 19 Replies
View Related
Nov 8, 2013
I have an existing drawing (A3 size) which loads with a mottled grey background for some reason (looks fine when printed).
I want to select a couple of small rectangles and put them on another page. Perhaps another possibility could be if I could save my selections as separate files (if this were possible) then I could use the "Open as Layers" method which is well described in this forum.
View 1 Replies
View Related
Jun 13, 2012
I'm creating a drawing with multiple layers, but I keep dragging the background layer by accident. I've tried selecting the layer I want to move before dragging with the move tool, but this doesn't stop it. I've tried selecting the chain in the layers toolbox, but this just locks the layers into one group which gets dragged off the edge of the canvas. Is there any way to render the background stationary?
I'm using GIMP 2.8.0
View 1 Replies
View Related
Dec 10, 2013
I just started using GIMP the other day, and it's great; I've already gotten the hang of layers and moving stuff around! But sometimes, after I put together a part of an image using multiple layers, I'd like to move that part somewhere else to give me more room or to put it next to something else. Is there a way to do this without going through each of the layers, selecting the part, and moving the part to its destination layer by layer?
View 3 Replies
View Related
Nov 16, 2012
I'm creating text along a path and then stroking the outline and adding a gradient fill - this is all fine. The problem comes when I want to move it, as once the text is added along the path, it often doesn't follow the path until the end so I'd like to centre it on the page, or maybe move it vertically a bit to fit around other stuff as I add to the image.
View 3 Replies
View Related
Nov 22, 2012
Ive figured out how to scale images and remove their backgrounds, but when I go to paste them in a new location I lose their scaling.
What I'm trying to do is put multiple pictures (the items are scaled to actual size, which is important) onto a single 8.5 x 11 page.
So, I've taken some of my pictures, opened their files scaled them to where they need to be, and then removed the backgrounds. I saved that as a new file.
How would I then take those files and place them, with the scale I made them, into something that is this 8.5 x 11 page size.
When I try to do it now, it doesn't keep the scale.
View 1 Replies
View Related
Aug 16, 2013
I'm trying to learn Gimp so I can use the art I made with it in my games later on but as a formal Photoshop user I feel like that I have a hard learning curve.
I'm trying to move things on my layer without effecting the layer boundaries (just like the way move tool works in Photoshop).
I know that this is possible using selecting the part I want to move on my layer, then holding Ctrl+Alt and dragging with my mouse, then it creates a floating layer what I have to convert to layer in the layers panel.
View 5 Replies
View Related
