I have a photo where branches above the main image intrude too much.
i would like to move them up to the top of the picture.
So far the only way I have found to move them leaves me with a white space that I need to fill in.Is there any other way to do it.
Ive copy and pasted into an image and i thought i got it where i wanted so i saved it and exited the program. But then i realised that the image i pasted was a few pixels off. I have been trying to select a portion of the image and move it to where i want it but cant find how. Ive selected the portion and clicked on move then selection but it moves the selection area not the image within it.
View 1 Replies View RelatedI want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
I have a photo. I used the Perspective tool and it is amazing. I do not know how, and cannot figure out how to make the black part of the photo go away though. What to do?
View 7 Replies View RelatedHow do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies View RelatedI need to find out how much smaller the part in the upper image is so it fits inside the similar shape in the bottom image. The real part is a bit more complicated so it's hard to calculate if it fits. Is it possible to make those parts in assembly mode so that they don't move through each other and I could move the upper part inside the lower and find out that way if it fits?
[URL]
I'm new to Inventor and I've been working on a complicated part for quite some time. However, I've just realised that I've made an error at the very beginning. I'm drawing the part in the YZ plane and extruding along the X axis. My problem is due to the fact that I began the drawing at x=0 when I should have began at x=7780mm. moving the entire part in the positive X direction? I've tried several approaches but none seem to work.
View 9 Replies View RelatedI am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.
View 2 Replies View RelatedI am using Inventor 2010 and would like each view of a drawing to show a different machining step. I.e.. A rough cut dimension and then the finish cut dimension. Is it possible to create the part as it would be machined and then use the EOP marker to set each view. Would like to model one part and get all views.
View 9 Replies View RelatedI have a bunch of parts that are almost identical except for a few minor changes each time. Most have already been created in Inventor. My problem is that I want to rotate the part so that a face that was once along the XZ plane will now be in the XY plane. Is there anyway to rotate it like this? I would like to do this so that when I bring it into Mastercam, I don't have to rotate it each time.
Crev64
Autodesk Inventor 2009
We have imported an AutoCAD 3D model into Inventor and the process generates many individual Inventor parts which are placed in a new Inventor assembly. The parts are all unconstrained in the assembly but spacially positioned relative to each other as they were in the AutoCAD file.
We want to create a new, empty, assembly and place the individual parts one by one into the new assembly constraining them appropriately as we go. This way we can develop a more logical set of sub-assemblies and have the parts more intelligently connected.
So to the point of my question, at last!. Each individual part, generated from the import, contains just a single body. There is no sketch or any features. The part's origin is at the point of the original AutoCAD model's origin. All of the imported parts will have the same origin point. We want to move the part's single body in space to align with the part's origin point and planes. This way when we re-build the assembly we can use each part's origin planes when constraining the part.
There doesn't appear to be any way of constraining or 'snapping' a part's body in space to the origin planes.
I'm wondering if I can move a part in iLogic or rule via X,Y,Z coords say from it's current location to 0,0,0?
I don't want to use constraints because it simply can't jump from one constraint to the next without blowing up.
I have a catalog of 13k+ photos that I'm trying to clean up. I'm using Elements 7, I have purchased Elements 11, and am planning to install it soon. Part of my photos are physically located on my hard drive, and part are on a network drive mapped as J:. Elements finds these photos on J: but I don't think that the Elements Catalog is aware that J: is a network drive/removable drive. It looks for them every time I open Elements, making the program very slow to start up.
Should I use the "move to removable drive" to move these photos? How will Elements treat these photos that have been sent to a removable disk? Will I still be able to see thumbnails of the photos and search through my tags for them? If I copy my photos to a new drive, but still call that drive J: will Elements be able to find them? And finally, if I perform this "move to removable disk" task, should I do it now with Elements 7 or update to Elements 11 first?
sometimes when using constraints the "movable" part is fixed after adding the first constraint.
If i use i.e. a surface to surface constraint the movable part should be free to slide on the surface.
To move the part in this case I have to add further constraint or delete the old one.
Furthermore sometimes constraints in assemblys do not update automatically. I have to click on the part and try to move it away. After releasing the part the consraint will be updated.
Are there any options to control or better change this behavior?
I am using Inventor 2013+Vault 2013.
I went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Is there a way to move a solid part in an assy using grip snaps and a specific vector direction .
Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.
The question is what is the best method of moving the gusset to the precise distance and direction ?
I found that Photopaint X6.1 is very unstable when i'm trying to move objects down or up.
Bad news is that its happening after longer period of work like around hour or more, designs with hundred or more objects.
90% of "not responding" errors are caused by moving objects down or up.
With X6 64bit I learned to save files more often than in previous versions.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I would like to move a selection from on photo to another. Example: I would put my face on an advertisement captured by by scanner. How can I do that with Photoshop elements?
View 2 Replies View RelatedHow can I move all my LR3 photo folders at once to a new drive so that LR3 knows where to find them?
View 10 Replies View RelatedI am new to GIMP.
I want to import a photo, trace geometric shapes over the photo like circles and lines, and then remove the photo. I have a very basic understanding of LAYERS. I have viewed a few tutorials. But I don't know how to import a photo or how to get rid of it once I have drawn the geometric shapes over it.
Lets say you use the adjustment brush and highlight only the subject of the photo to brighten it up and make adjustments. Then the next photo you have is almost identical, except it is framed a little differently. So, when you sync the settings from the previous photo to this new photo (including the brush adjustments), the overlay mask will mimic the previous photo and will not line up with the subject in the new photo. Thus, my question is, is it possible to move the overlay mask in the new photo after the sync so that it can match precisely over the subject?
View 1 Replies View RelatedWhen I'm working in PP on designs with many layers I have problem with uncontrolled attaching to object i'm moving.
For example I'm moving object to bottom of page using shift + page down and after trying to move it few layers up using ctrl + arrow up. Sometimes two objects moving instead one. Its random error so hard to simulate it when you want.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
how to go about moving all the photos that are currently on my comp hard drive to an external hard drive without losing all my work labelling the photos in the catalog. I want to avoid having to relink all the connections on >15k photos which are all tagged and in a catalog.
BTW I am currently running on PSE 7.0 but am willing to upgrade.
How do I move existing photo albums from photoshop 9 to photoshop 12?
View 1 Replies View RelatedI have ubuntu natty and gimp 2.7.3. Whenever I click the docks they won't move.
View 2 Replies View RelatedI have one hard disk filling up with photos, so I have purchased a secondary hard disk to expand my storage. I would like to move my shoots from 2010 to that new hard disk, but I don't want to loose all of the edits saved on them in LR3. I have experimented with moving non-important images that have edits on them, then re-importing them. Unfortunately, LR3 does not preserve that history.
View 1 Replies View RelatedI am using GIMP 2.8 on a MacBookPro with OSX 10.8.
I want to cut and move a selection (and, if at all possible, preserve and then enlarge the selection rectangle to perform a subsequent cut and move operation.)
I've got a graphic, let's say it's a 10x10 pixel square in black. What I want to do is to add a vertical column of white pixels in between every existing column of the image.
What I thought to do is the following: first, enlarge the canvas to twice the width of the image, so 20Wx10T (original image on left, blank extension on right). Now select the rightmost column of pixels and move the contents of the selection one pixel to the right. Extend the left edge of the selection rectangle 2 pixels to the left, to include the newly "blank" column and the next column of the image. Move new selection and contents one pixel to the right, and so on, until the expanded canvas is filled and there are 'blank' columns between every column of pixels in the original image.
However, I am unable to find a way to move the selection and its contents. I've tried every combination of secret handshake I can think of, but none work. I'm able to move the selection and essentially duplicate it in another location, but not by cutting it and moving it somewhere else, leaving the initially selected area blank.
Upon inserting a .xcf drop-shadowed image into another .xcf image - by selecting Open As Layers - it inserts fine, but when I select the Move tool to move the image, the drop shadow doesn't move with the image. I tried selecting the drop-shadow layer from the layers - channels, paths area, but when I do that, and then try to move the drop shadow, instead of the drop shadow moving - when I select it, the entire background moves.
View 1 Replies View RelatedI need to assemble multiple images in an illustration program (inkscape or illustrator for example). So I want to cut and paste several regions from different images, but I want them to all be exactly the same size. What I had been doing in photoshop was just dragging the selection from one open image to the other and that would preserve the size so I could copy again, but that doesn't seem to work in GIMP, or rather, nothing I tried seems to work.
How can I get a selection to be identically sized between different images without actually moving any part of the image itself?
I have my background image, with some text which I created. I wanted to add some external images into the canvas.
When I open the image as a layer, it imports fine. But when I attempt to move it (holding ALT), it stays in the same place.
I am having a hard time trying to add a logo to a picture. I open the picture, then I open the logo as a layer and it pops into the center of the photo. Problem is, I don't want it positioned in the center, so how do I select it and move it around to where I want it? Even when the layer is highlighted I can't figure out which tool will let you grab it.
View 2 Replies View Related