I know those are almost opposites, but is there a way to allow VSPro to somehow pre process the video such that my preview runs more smoothly and with high resolution (or at least more smoothly).
I have a decent box and am trying to process 1080p clips. It seems to run smoothly after I create a file (in the preview window), but is there a way to have it do that without going to step 3 ("Share")?
When I work on the texture in one window and have the 3d window showing there is a huge discrepency in the preview resolution in the 3d window. It only gets crisp when I interact with the 3d model, move, rotate etc, but when I stop, it gets all pixelated again. I have it set to Best AA but that made little difference and I'm not finding any options anywhere.
Is there any way of setting the redraw resolution of the 3d preview to match the crispness of the 2d canvas?
Illustrator Question regarding the texturization window. For some reason, every texture included (as well as one that I made in Photoshop), shows up in the Texturization window with a resolution of about 20 x 20 pixels. Even the simple sandy texture I made with Photoshop is displayed with poor resolution.
When I try File >> Place >> sand_texture.psd and drag it into the Swatches window, the texture isnt added no matter what I try.
I have included an image of what I see when opening the Texturization window.
Oh: Windows 7 64 Bit, Illustrator CC
I am buying a laptop for AE for mobile reasons.does the fast preview(so the instant result after changing an effect value you get in the preview window) depend on gpu or cpu, or both depending on what effects are used? I am looking at a 670mx for cuda, but 7970m for dominant opengl scores.
Will these 2 gpu's give me different performances regarding fast preview,or is looking into different gpu's not a worthy question yet due to After effects mostly being a cpu heavy program? Now i know all that ray tracing acceleration and how nvidia cards are necessary for that, but this is regarding fast preview only.
I recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
I've been wondering... Since resolution is such an important factor to whether a pic is sharp and clear, how is photoshop able to increase the resolution of the pic? From what I heard, the picture is broken down into more pixels when the resolution is increased. If so, how can it distort the pic?
I also have this senario which I'm facing now... Since it's rather confusing, I have broken it down into Steps...
Steps:
1) Open picture A in photoshop
2) Transformed picture A smaller so that it is easier to work with (less lag)
3) I created some layers and merged all the layers together
4) Copy the merged layer into another Art piece in Photoshop
5) In the new Art piece, I transformed the merged layer back to the original size
As I transformed the merged layer back to the original size, will it become distorted? Or will the resolution remain around the same?
How can I change low resolution into high one?
View 3 Replies View RelatedHow do you increase resolution in light room 4
View 9 Replies View RelatedSo i write some text on to a picture and it never look sas sharp as i want it too, so if i zoom in a bit you can see that the DPI are not very good, very blurred, what can i do to increase this, so that even in a highly zoomed state, it looks very clear and sharp?
View 2 Replies View RelatedTrying to model from an image. I can load the picture for the background, lock the pan and zoom, and match the bitmap in the aspect ratio.... but how to increase the resolution of the background so I can get a more detailed model?
View 4 Replies View RelatedI understand there's a plugin that can increase the quality of a low resolution JPG, smoothing out the pixel effect. which one it is, if it exists?
View 3 Replies View RelatedI would like to know if there's any possible way of increasing the quality of a low resolution image? if sharpening the image might make a difference.
View 3 Replies View RelatedHow can I increase the resolution so I can read the text
View 4 Replies View RelatedI need a render with good Quality, so i define the " standard render" on "presentation", and "render quality" on "5", and image size on 2500*2500, BUT the image Weight gets so low, like 500KB..
How can it be? How can i increase the quality?
In AutoCAD 2013 model documentation, how do you increase the resolution of shading so it more closely follows the linework? See example.
View 4 Replies View RelatedWhat I'm after in an 'increase photo resolution' tool similar in result to PhotoAcute Studio (without the hefty price tag). I suspect this may be available but named something else.
View 2 Replies View RelatedI have a very small document (image) I want to use the Liquify filter on but its goes so small while in the Liquify edit window It is really tough to get to what I need to see,My question is ,Is there away to increase the edit or preview window size or is it locked to default?
View 9 Replies View Related90 mins to render 6 mp4 files to an AVCHD file. I don't see much quality difference for the 3x longer rendering time and file size compared to an mpg file.
View 3 Replies View RelatedOne thing that is slowing me down is that all my photos and videos are on a Western DIgital NAS box that I can access with fairly decent performance. I want to leave them there as I have them all organised how I want them. I have a 64-bit Windows 7 laptop with 4GB RAM and Intel Core i5 processor and access the NAS box via a Wireless-N connection on the laptop via a Netgear Wireless-N router.
When I add a video or photo I get a lag (more notably the videos) but worse is selecting a video after importing it into a library. It can take a good 10-30 seconds before I can continue using VideoStudio. Is there anyway I can reduce this lag selecting videos or is my only option to copy videos to my laptop?
I recently purchased Corel VideoStudio X4. I installed SP1 and SP2. I am facing very long delays in a project with 1080p files. The slowness only comes when Smart sounds track is added. If I delete it, everything is back to normal. I have tried rebuilding the index for Smart sounds Quick tracks but the problem persists.
View 2 Replies View RelatedI use PS 7 and learning fast.
The default resolution when I open a photo, is set on 72 pixels per inch. This produces a photo with not a lot of detail and my previews are not the same as the end result. I have read somewhere that it is better to work on 300 dpi. Is this correct?
And if so, how do I change the default setting?
Or should one always work on 72 and occasionally change to 200-300 dpi?
I found a post here that says the best way to increase the volume in a video is to normalize all clips individually. I tried that but for some reason my video would get all buggy with I split the clips into video and audio and then normalized the audio.
Buggy in the sense that at playback it would just stop as if stuck and wouldn't play. Then I tried creating a media file despite the fact but it would not do so.
Fast forward I am out of time for a project so I went to every clip and changed the audio percentage instead.
In sum, my question is, is there a way to increase the volume for the whole video before or after the mp4 output is created? Somehow the overall volume doesn't seem loud enough.
I have a video shot from inside a vehicle driving down a rural French road. I would like to increase the speed to 110% to 115% as the video progresses to match the music I will overlay it with.
I know how to increase the playback speed, but I can't seem to find if it's possible to do it gradually. Everything I try increases the speed all a once. Is this possible (gradually increase speed) with the Playback Speed settings, or do I need to make two clips of the same segment, 1 at regular speed and 1 at the final speed, and use a long transition between them?
How can I increase the size of the sound wave in the time line. When I use the zoom tool to increase the size, it increases in width but not height and I need to see the wave in a larger view regarding editing and syncing etc. Using x4
View 3 Replies View RelatedI'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies View RelatedI'm experiencing poor resolution with a title bar that is a png file. I am creating the bar from a vector graphic and creating a large png file that has great resolution. But when it's rendered in the movie it look terrible. Is there a preferred graphic type to use?
View 3 Replies View RelatedI've just burned a DVD slideshow using some 7mp Photos. The mpg file looks fine at 720X480 but when I burn this to disk the resolution appears really low, maybe around half the original. The video file is only 350M so it's not a compression issue.
View 1 Replies View RelatedI'm having problems trying to set the video resolution on both of my copies of VS Pro X4. The captures I'm using are 16x9, and when I select a thumbnail and play it, the clip first displays as 4x3 in the preview window, then when it starts playing, it goes to 16x9, but when I put the clip in the video track, it displays and plays in 4x3... even after I change the Project Properties to 16x9, it still does the same thing.
I have recently taken some of the same files and created a 16x9 optimized MPEG in the share menu, but for some reason, I'm unable to do it again. I have had problems with my capture device, and haven't used VS Pro X4 for a while, but now I have a new methodology, and am back to working with video, again. Some of the things I did before, are now forgotten... I'm sure the answer is somewhere on this site, but so far, all of my searches and reading have only offered the things I have already done, and so far as I can tell, that doesn't work. At this point, I can't remember if the editing I did before, was displayed in 4x3 or 16x9, but the DVDs I have burned are definitely in 16x9, but the last one was definitely 4x3.
This may seem a strange question, but I do not work with images very often and having just returned from holiday in NZ (how privileged you are to live there Ken) I have some 30GB of video and almost 1000 images to edit.
These images are 16:9 4000x2248, 180 dpi and 24 bit depth, so is there an optimum resolution that these should be reduced to, for creating projects in conjunction with the video (1280x720 HD 59fps) I read some time ago that images need to be reduced in size, but I can't remember why.
I have a screen capture video which is 1024x768. I want to edit it and export as .mp4 in its same resolution--1024x768. You would think this would be easy, but it's grayed out. I tried Settings, create a custom export format and it was grayed out there too. How do I export my 1024x768 video as 1024x768 .mp4?
View 4 Replies View Related