Photoshop :: Increase Cs4 3d Preview Resolution?

Jan 14, 2009

When I work on the texture in one window and have the 3d window showing there is a huge discrepency in the preview resolution in the 3d window. It only gets crisp when I interact with the 3d model, move, rotate etc, but when I stop, it gets all pixelated again. I have it set to Best AA but that made little difference and I'm not finding any options anywhere.

Is there any way of setting the redraw resolution of the 3d preview to match the crispness of the 2d canvas?

View 3 Replies


ADVERTISEMENT

VideoStudio :: How To Increase Preview Resolution And Performance

Dec 3, 2011

I know those are almost opposites, but is there a way to allow VSPro to somehow pre process the video such that my preview runs more smoothly and with high resolution (or at least more smoothly).

I have a decent box and am trying to process 1080p clips. It seems to run smoothly after I create a file (in the preview window), but is there a way to have it do that without going to step 3 ("Share")?

View 4 Replies View Related

Illustrator :: Increase Resolution Of Texturization Preview Window?

Dec 5, 2013

Illustrator Question regarding the texturization window. For some reason, every texture included (as well as one that I made in Photoshop), shows up in the Texturization window with a resolution of  about 20 x 20 pixels. Even the simple sandy texture I made with Photoshop is displayed with poor resolution.
 
When I try File >> Place >> sand_texture.psd  and drag it into the Swatches window, the texture isnt added no matter what I try.
 
I have included an image of what I see when opening the Texturization window.
 
Oh: Windows  7 64 Bit, Illustrator CC

View 7 Replies View Related

Photoshop :: Able To Increase The Resolution Of The Pic?

Nov 3, 2007

I've been wondering... Since resolution is such an important factor to whether a pic is sharp and clear, how is photoshop able to increase the resolution of the pic? From what I heard, the picture is broken down into more pixels when the resolution is increased. If so, how can it distort the pic?

I also have this senario which I'm facing now... Since it's rather confusing, I have broken it down into Steps...

Steps:

1) Open picture A in photoshop
2) Transformed picture A smaller so that it is easier to work with (less lag)
3) I created some layers and merged all the layers together
4) Copy the merged layer into another Art piece in Photoshop
5) In the new Art piece, I transformed the merged layer back to the original size

As I transformed the merged layer back to the original size, will it become distorted? Or will the resolution remain around the same?

View 1 Replies View Related

Photoshop :: How To Increase Resolution ?

Jan 10, 2007

How can I change low resolution into high one?

View 3 Replies View Related

Photoshop :: How To Increase The Resolution, DPI Of Text

Apr 15, 2009

So i write some text on to a picture and it never look sas sharp as i want it too, so if i zoom in a bit you can see that the DPI are not very good, very blurred, what can i do to increase this, so that even in a highly zoomed state, it looks very clear and sharp?

View 2 Replies View Related

Lightroom :: Library Preview Displays At Lower Resolution Than Develop Preview

Jun 2, 2013

I recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
 
Previews zoomed to 1:1 in Library Mode are noticeably soft.  The image below is a screen shot of the Library preview:

Moving to Develop View produces a higher-resolution 1:1 preview.  The image below is a screen shot of the Develop preview:

Look at the bricks and window screens to see the difference.
 
This difference occurs immediately after import (with a User Preset applied during import).  Once any Develop work is done, the Library preview updates and displays at full resolution.
 
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.

View 3 Replies View Related

Photoshop :: Increase Quality Of Low Resolution Images?

Apr 23, 2013

I would like to know if there's any possible way of increasing the quality of a low resolution image? if sharpening the image might make a difference.

View 3 Replies View Related

Lightroom :: How To Increase Resolution In LR4

Dec 11, 2013

How do you increase resolution in light room 4

View 9 Replies View Related

3ds Max :: How To Increase Viewport Background Resolution

Jul 20, 2011

Trying to model from an image. I can load the picture for the background, lock the pan and zoom, and match the bitmap in the aspect ratio.... but how to increase the resolution of the background so I can get a more detailed model?

View 4 Replies View Related

GIMP :: Increase Quality Of Low Resolution JPG?

Sep 11, 2013

I understand there's a plugin that can increase the quality of a low resolution JPG, smoothing out the pixel effect. which one it is, if it exists?

View 3 Replies View Related

Lightroom :: How To Increase The Resolution To Read The Text

Apr 7, 2014

How can I increase the resolution so I can read the text

View 4 Replies View Related

AutoCAD 2013 :: Render Resolution - How To Increase Quality

Oct 28, 2013

I need a render with good Quality, so i define the " standard render" on "presentation", and "render quality" on "5", and image size on 2500*2500, BUT the image Weight gets so low, like 500KB..

How can it be? How can i increase the quality?

View 8 Replies View Related

Photoshop :: Increase Edit Or Preview Window Size Or Is It Locked To Default?

Feb 16, 2012

I have a very small document (image) I want to use the Liquify filter on but its goes so small while in the Liquify edit window It is really tough to get to what I need to see,My question is ,Is there away to increase the edit or preview window size or is it locked to default?

View 9 Replies View Related

AutoCAD 2013 :: How To Increase Resolution Of Shading In Model Documentation

Mar 27, 2012

In AutoCAD 2013 model documentation, how do you increase the resolution of shading so it more closely follows the linework? See example.

View 4 Replies View Related

Paint.NET :: Increase Photo Resolution / Double Number Of Pixels In Image?

Aug 9, 2011

What I'm after in an 'increase photo resolution' tool similar in result to PhotoAcute Studio (without the hefty price tag). I suspect this may be available but named something else.

View 2 Replies View Related

Photoshop :: Should One Change The Resolution Of The Preview Photo?

Jul 28, 2009

I use PS 7 and learning fast.

The default resolution when I open a photo, is set on 72 pixels per inch. This produces a photo with not a lot of detail and my previews are not the same as the end result. I have read somewhere that it is better to work on 300 dpi. Is this correct?

And if so, how do I change the default setting?

Or should one always work on 72 and occasionally change to 200-300 dpi?

View 4 Replies View Related

Photoshop :: Making Low Resolution Image Look Higher Resolution For Print

Mar 17, 2013

I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.

View 4 Replies View Related

Photoshop :: Convert Low Resolution Image To High Resolution

Aug 25, 2007

I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?

View 1 Replies View Related

Photoshop :: Big Low Resolution To Small High Resolution

Oct 23, 2004

i have some big .jpgs with low resolution say 10x10 inch at 72dpi.

is it possible for me to convert it to 2x2 inch at 300dpi?

View 5 Replies View Related

GIMP :: Create High Resolution Version Of Low Resolution Texture Used In A Game

Nov 17, 2012

I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...

Original texture:

[URL]

The image to be colorized:

[URL]

View 2 Replies View Related

Photoshop :: Oil Paint Feature - Preview / No Preview Capability?

Sep 3, 2012

A feature notably absent from the Oil Paint filter is any way to temporarily disable the effect (e.g., not preview it).I happen to like using Oil Paint to make refllections in the surface of water smoother and more "liquid" (which involves turning off the "Shine"), and it would really be nice if I could easily gauge the amount of the effect easily by blinking back and forth between original and processed image with a quick "disable preview" functionality.
 
With most standard filters, one can either uncheck a [ ] Preview box, and/or click the mouse button down on the image to temporarily show what the image is like without the effect.Yes, I know I can turn the Stylization down to 0.1 and see how a very minimal amount of the effect can be  applied.  And I can look at the original image in Photoshop proper, but of course that can't be zoomed while the Oil Paint filter is active.
 
Also, the zooming / panning seems kind of stiffly implemented.In summary, the more or less standard and expected filter features I'd like to see added to this (new class of) GPU-accelerated filters are:Preview/No Preview capability.  It doesn't have to update Photoshop, just the preview display in the filter itself.  I suggest a [  ] Preview checkbox and/or an on-mouse-click temporary effect disable. 

Modal click and drag Zooming vs. Panning - i.e., based on a Zoom or Pan function selected (e.g., via an icon along the left) vs. having to hold modifier keys down.  I personally would want it set to Zoom by default, not Pan.  Since the filter has scroll bars (a Good Thing), I would have thought Zoom would have been a better default as it is. I have implemented these things in my own GPU-accelerated plug-ins, so I know that all the infrastructure Adobe needs to support them is already in there.  These changes are controls only and should be trivial to implement.

View 11 Replies View Related

After Effects :: Preview Is Just A Black Screen Throughout Entire Preview / Titles Never Show Up

Jan 2, 2014

I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.

View 2 Replies View Related

Lightroom :: Fails To Create Preview And Smart Preview?

Mar 29, 2014

I am using MacBook (late 2008) OS X 10.9.2 and recently upgraded to Lightroom 5.3 from Lightroom 4. After a while, some photo started to show exclamation mark at the right hand corner of the photo (*.CR2 raw files in NAS) in grid view. When I click on the exclamation mark, it shows a dialog with following message; "Lightroom has encountered problems reading this photo". So, I moved previews.lrdata, which is about 9GB, to the trash and restarted the Lightroom 5, expecting Lightroom 5 to create a new previews.lrdata. However, it won't create any preview at all.
 
exclamation mark at the top right hand corner of the photos in grid view.
 
size of Previews.lrdata file stops at 152KB.

View 3 Replies View Related

Photoshop :: Increase Available RAM For FS Use?

Jul 17, 2013

Can't allocate more of my available RAM.  Program only recognizes 1600 MB to be my 100% allocation, although I have 8GB RAM available.

View 6 Replies View Related

Photoshop :: How To Take PNG And Increase Its Opacity

Oct 6, 2012

I have a PNG file with some transparency. I need to paint in some opacity in the alpha channel. How can I achieve this? In the Channels window, I can access the R, G and B channels just fine, but I need to access the Alpha channel. I need to make my image more opaque in places. 

View 11 Replies View Related

Photoshop :: Increase 3D Perspective

Aug 27, 2012

I was messing around with Repousse (CS5 Extended) and found that it would be nice to increase the perspective severity on my object, much like increasing the Perspective degree value when adding the 3D effect to a vector shape in Illustrator. Is this possible? Or can it be faked somehow?

View 3 Replies View Related

Photoshop :: How To Increase Illumination In 3D

Oct 9, 2012

Well the pest is back with another 3D in CS6 question... I'm attempting to use Illumination on my office ceiling here to simulate light reflecting off a wood floor. As you can see, the reflections don't show up very well. How to increase the intensity of the reflected ceiling lighting in this digital room?

View 11 Replies View Related

Photoshop :: Increase A Size

Apr 4, 2006

you probably heard this many times but i got a picture and would like to resize an object in the image. for example a car and i would like to make the rims bigger, how would i do that.

View 1 Replies View Related

Photoshop :: Mem. Usuage Increase

Mar 13, 2006

I have Photoshop CS and it's been runing well. I believe it was running when 'doing ctrl/Alt/Del to checl processes' around 30,000K or so. But recently I've noticed that the Memory Usuage is at 99.524 before working on any doc. I'm not sure if I tweaked something my computer and I'm sure I didn't tweak anything in Photoshop.

View 1 Replies View Related

Lightroom :: Can't Jump Back From Publish Service Folder Preview To Different Folder Preview In Grid Mode

Oct 7, 2013

Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
 
I updated from LR 4 using Creative Cloud installer.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved