I've just burned a DVD slideshow using some 7mp Photos. The mpg file looks fine at 720X480 but when I burn this to disk the resolution appears really low, maybe around half the original. The video file is only 350M so it's not a compression issue.
View 1 RepliesI still have actual burned DVD's and am wondering if it is possible to somehow open them in VideoStudio to do some additional editing.
View 3 Replies View RelatedI have been using corel video studio pro x4 for about 6 months for uploading videos to youtube. Works just fine. I have now edited and composed a 50 minute video that I have tried to burn onto dvd+r and when the finished product is played it starts out just fine and in time. Minute by minute though the audio starts to lag away from the video being displayed to where at the end of my 50 minute dvd it is off by more than 5 seconds.
View 1 Replies View RelatedWhen you are burning HD footage (video type H.264, Upper Field First) to a DVD, do I keep the project input and output on UPPER FIELD FIRST? Or am I supposed to change both to FRAME BASED?
This is what I know:
SD is Lower Field First
HD is Upper Field First
"Still Photos" is Frame based
I had a videographer tell me today that to burn HD to a DVD i'm supposed to use FRAME BASED. And HD to a BLUE RAY disc is UPPER FIELD FIRST. I thought Frame Based was only for Slideshows.
I'm currently using Corel VideoStudio Pro X4 Ultimate
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: 8000 kbps
Audio data rate: 128 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies View RelatedI tried to burn a movie to my tv screen in VS Pro X4. i used 4:3 aspect ratio but when i took the DVD to view on my tv, i saw 4 black borders around the movie on my tv screen, the borders were on top, bottom and both the right and left side. I tried both 16:9 and 4:3 in VS x4 and both had the same results 4 black borders.
when i burned the same movie in VS 10 plus with 4:3 the movie fits the size of my tv screen.
why is it that VS pro X4 ultimate cant burn the movie to fit the size of my tv screen as it did in VS 10 Plus? what setting am I missing in setting in VS X4
Completed my film, created video file and burned it successfully. For this film I used copyright free music. Unfortunately, when playing back the burned disk, the sound "skids" and sounds somewhat distorted in places. Less so but still distorted is some of the spoken word in the film (ie the person on the film not voiceover). (Everything is fine when playing back the project in VS.) It's not so bad you can't play or hear it but obviously not satisfactory to my own pride! - letalone the viewer.
I do not use the "normalise audio" function and wonder if this would make a difference? I had presumed until now that the normalise audio function would merely make all audio the same level - on whatever work I had done to make the sound/voice overs different, e.g. lowering sound at the point of voice-over etc. I should say I have used a lot of visual effects in the film - 6 overlay tracks - and wonder if I have exceeded the bounds of sensibility!
File name appears at bottom of video ?
I new to VS X5 Pro. I have a very basic question, I'm sure.... Is it possible to not have the computer file name of the video appear at the bottom of the video for the first few seconds? It does fade away but is not acceptable to be there at all. Is this a Windows 7 config issue or something in VS?
I'm experiencing poor resolution with a title bar that is a png file. I am creating the bar from a vector graphic and creating a large png file that has great resolution. But when it's rendered in the movie it look terrible. Is there a preferred graphic type to use?
View 3 Replies View RelatedTried to install PS 7.0 on my spanking new computer with XP Pro, and was asked to furnish proof of a prior version, I couldn't. I went from 3.1 on an old Gateway to 4.0 on a previous Dell and upgraded to 7.0. needless to say 3.1 is toast, and I can't install 4.0 without it. 7.0 won't install without a prior version.
View 3 Replies View RelatedI'm having problems trying to set the video resolution on both of my copies of VS Pro X4. The captures I'm using are 16x9, and when I select a thumbnail and play it, the clip first displays as 4x3 in the preview window, then when it starts playing, it goes to 16x9, but when I put the clip in the video track, it displays and plays in 4x3... even after I change the Project Properties to 16x9, it still does the same thing.
I have recently taken some of the same files and created a 16x9 optimized MPEG in the share menu, but for some reason, I'm unable to do it again. I have had problems with my capture device, and haven't used VS Pro X4 for a while, but now I have a new methodology, and am back to working with video, again. Some of the things I did before, are now forgotten... I'm sure the answer is somewhere on this site, but so far, all of my searches and reading have only offered the things I have already done, and so far as I can tell, that doesn't work. At this point, I can't remember if the editing I did before, was displayed in 4x3 or 16x9, but the DVDs I have burned are definitely in 16x9, but the last one was definitely 4x3.
This may seem a strange question, but I do not work with images very often and having just returned from holiday in NZ (how privileged you are to live there Ken) I have some 30GB of video and almost 1000 images to edit.
These images are 16:9 4000x2248, 180 dpi and 24 bit depth, so is there an optimum resolution that these should be reduced to, for creating projects in conjunction with the video (1280x720 HD 59fps) I read some time ago that images need to be reduced in size, but I can't remember why.
I have a screen capture video which is 1024x768. I want to edit it and export as .mp4 in its same resolution--1024x768. You would think this would be easy, but it's grayed out. I tried Settings, create a custom export format and it was grayed out there too. How do I export my 1024x768 video as 1024x768 .mp4?
View 4 Replies View RelatedI have a video that in its native format is 1920 x 1080. I need to add our logo to the corner and I have easily done this. Now I need to render it out into several different formats. Rendering it as an MP4 isn't a problem. However, I can't seem to get anything to work in the WMV category. Each time I try to change the size attribute of ANY of the 'profiles' I receive an Access Denied error from Windows Media inside VisualStudio. After I click OK, it tells me to restart the codec and try again. I can pick any of the profiles and receive the same error.
After that issue is corrected, I have another one that is similar. At the 1920 x 1080 resolution, the black bars occupy quite a bit of the viewing window. I can easily 'crop' them off but then I am faced with the same issue as above. How to I set ANY of the formats (MP4, WMV, etc) to 1772 x 472 as the finished size. None of the file types allow you to change the size. Am I missing a simple step here? I have a feeling I am.
Now that I've build my slideshow using VS x4, I'd like to merge a copy of the hi res pics in a top level folder of the ISO master. I was not successfull at creating the VIDEO_TS and AUDIO_TS folders, adding another "PICS" folder and burning them to a DVD.
View 2 Replies View RelatedI use VS Pro 2X and I still use an old Sony handycamDCR-TR310 8mm NTSC digital camcorder for all my stuff. I'm not buying anything new in the near future.
Here is my problem:
When I burn to DVD after capturing video the quality of the video on a 1080p television is bad. MY Blue-Ray player upsizes DVD resolution but it looks like a low resolution WMV file.
I understand that this is not an HD video being played on an HD TV so the quality will not be steller. The reason for posting this question is that I have played a DVD, from the same setup, I made a year ago with a DVD I just made and the older DVD is much better resolution. This only affects video not titles or images or anything else.
Here is what I have changed since last year:
- I use the proxy feature in VS for editing video
- I burn DVD to 16:9 now instead of 4:3 but I have changed back and no fix at all
Assuming the camera is still good and the quality of the DVD burner and media are the same could there be something in VS Pro X2 that is changing my resoultion or quality from capturing, editing to burning? Maybe I changed something and did not know it. Where should I look?
can X4 make slide shows and burn them to DVD. I have been using windows live movie maker, then burning with windows dvd burner (win 7). I keep getting way too soft photos after burning with windows dvd. Edited pictures look great in movie maker, but degrade once burned with win dvd.
View 6 Replies View Relatedretaining more of the resolution inherent in photo or scan imported into a video, to increase the sharpness when panning or zooming across it? eg - original photo of a map may be 8Mpix. Would it work to make a hi def clip of the zoom to insert in an SD project?
View 10 Replies View RelatedI am using VS X2. I am trying to create a DVD of my project. I have assembled my files/projects, created a menu, and previewed. This is as far as I can get. The prompts at the bottom of the page are not displayed properly. I have a "back" prompt in the lower left and it looks like there is the start of a prompt in the lower right. I have adjusted my screen resolution to no avail.
View 2 Replies View RelatedI know those are almost opposites, but is there a way to allow VSPro to somehow pre process the video such that my preview runs more smoothly and with high resolution (or at least more smoothly).
I have a decent box and am trying to process 1080p clips. It seems to run smoothly after I create a file (in the preview window), but is there a way to have it do that without going to step 3 ("Share")?
I am not yet an owner for VideoStudio. This program is on my short list of software I wish to use for screen capture (creating a series of tutorials for an online classroom) and I have to be able to produce these items in a minimum of 720P 16x9 format (Ideally would like to grab at 1080P but 720 is my absolute minimum requirement). Can VideoStudio do this for me? Do I need a specific capture/video card to be able to acquire at a 720P resolution?
I have a background in broadcast television in my day job, (I edit on Quantel and Apple FCP) and what I like about this software is that it's an "all in one" solution.
PS. running Windows Vista Ultimate 64bit, 8GB RAM, NVidia GeForce9600GT card
I'd like to create a video with an awkward resolution: 400x70. I don't see how to do this in VS5. Even when I go to the "Share" option, my custom resolution buttons are greyed out. Is there a way to do this?
View 1 Replies View RelatedJust finished up a little slide show type project for the mother-in-law's 75th birthday. When I rendered the project to an AVCHD or MPEG-4 HD file, playback quality is excellent. So I needed to make a DVD version of the project as the old girl doesn't do 'puters. But when I burned the project to DVD the resolution of the pictures/titles was reduced substantially.
I used the following settings for the project and burning:
Project Props:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
DVD Props:
DVD Video 16:9
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
The resulting burn would only load on one of three (different brand) DVD players. Picture quality poor. Visible jags on edges of titles. Flicker on background Lens Flare effect.
Then I tried changing the DVD settings to:
*DVD Slideshow 16:9
MPEG files
24 bits, 720 x 480, 29.97 fps
*Frame-based
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
This resulted in a quick load and play on all three DVD players. Flicker on Lens Flare effect gone.
Picture quality still poor. Jags still visible on titles.
This is my first crack at burning to DVD and I'm just wondering what I'm missing here. I would assume that the DVD quality should be equal to AVCHD or MPEG-4.
Am planning on using photo of map as background for a poster. How to make edge of map look burned or really old?
View 1 Replies View Relatedsome time ago (and I cannot connect it to some specific action from my side) I'm facing an unpleasant fenomena: when I'm processing a CR2 (Canon RAW) file and exporting the result to the hard disk as JPEG, the resulting JPEG file looks completely burned out ... but only if viewed in the Lightroom. If I view it for example, in a browser, or with the FastStone viewer, or whatever -- it looks perfectly normal.
View 8 Replies View Relatedmy photo's are in numbered order in the library but when burned to disc are all random, they have been edited from 3 cards and saved as a smart colllection, how can I get them to burn in order as library shows them !
View 4 Replies View RelatedI am new with X4 and with Corel software. I just want to ask you why I am unable to choose my custom resolution?
I try to share my video with MP4 format, and I am using custom settings but user defined resolution is not available.
I cannot find a way to keep the native resolution when exporting it to this size, even using the same as project settings, it makes it 720x480, when i look at the file when clicking properties it says uncompressed 1920x1080, how do i export it as such just a little more compressed?
View 2 Replies View RelatedI have canon legria HFR 106 [URL]......
Problem is setting of the best resolution:
-FULL HD is making these horizontal lines (every other pixel line) if something moves in the picture so its not good
- lower camera setting makes the resolution to 1440x1080 which is 4:3 !! that's not the ratio of today (and youtube) and i didn't even realize it because video studio has 16:9 project settings and the ratio of outputted video seems right?
- Compared these: video 4:3, project 16:9, still images from another camera 4:3 -> fail
what do you recommend, is there a way to get full resolution better without those lines or other way to 16:9 ?
2. Also only recent and fast opening player to play those camera raw videos (.mts) is VLC-player. Is there a way to get it open those videos in zoom mode of 50% or 33% and not 100% they goes over my screen every time!
I have used X4 for about two years and X6 for the past couple of months. I cannot figure out how the create more rendering options under Share -> Create Video File. For example, if I want to use the MPEG codec but a custom resolution. Often custom is greyed out and not selectable. In free software such as ffmpeg or Virtual Dub I can create video as any resolution, aspect ratio, or codec. VS options seem to be very limited to these prepackaged choices. For example, some people have described moving a .DLL to the Coral folder to get custom codecs under the Create Video -> custom option. I'd rather not have to always render in VS and then recodec in another software.
My biggest challenge is the new Instagram format. It is basically 640x640 webm format. But I can import MPEG h264 without issue. My goal is to setup a 1:1 640x640 profile so I don't always have to game and stretch titles to display properly in the final version.
I just upgraded from VS Pro5 to VS Pro 6. Will not launch.
Get error msg "Screen resolution size is not sufficient to launch the application"
Screen resolution is currently set at 1366 x 768 which is "recommended" I have reset resolution and restarted with each attempt at changing resolution... still get message..
Not a happy camper... Seems they should be sophisticated enough to check that system is set properly.... and if not, to give information on how to correct.