AutoCAD LT :: Intermittent Failure To Complete A Plot
Oct 12, 2011
I have been experiencing an intermittent problem with printing from my AutoCAD program.
Around 80% of my plotting tasks are sent to the printer and print correctly.
The other 20% print but only partially (they get anywhere from 1/3 to 2/3s through the plotting process then the remainder of the drawing is blank).
There does not seem to be any consistency to the fault i.e. it happens on different drawing files at different times.
When it does occur, there is nothing I can do to correct it. I have tried shutting all other programs down and doing no further work whilst the print is in progress but to no avail.
This is only a problem with AutoCAD and only some of the time.
View 4 Replies
ADVERTISEMENT
Sep 20, 2012
How do you TURN OFF the Plot and Publish Dialog box in AutoCAD LT 2012?
I opened up the dialog box and chose to only notifiy me for "Errors Only"......but it still pops up for ALL my printing and then won't shut off unless I close it myself.....very annoying!
I have turned off the notification for my OS setup but this is unique to the Autodesk software.
I have attached a word doc with my screen shot of the dialog box that pops up and then the larger box that opens up when you want the details.
View 4 Replies
View Related
Sep 20, 2013
Have a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
View 7 Replies
View Related
Mar 30, 2012
I've written a piece of code in C++ to open a part in Inventor and get parameter data from the part from out-of-process. This code works, but occasionally (i.e. randomly) execution of the code will result in an error message being returned from Inventor which indicates a crash of the program. I cannot figure out why, and because the problem occurs randomly I've had difficultly isolating the problem. Here is my code. The error suggests that I might be releasing memory that I don't own or something like that, but since it happens intermittently it is hard to know.
int error;CComBSTR bsPartName;CLSID clsid;FILE *out;HRESULT hres = NOERROR;TCHAR szFileName[255];/* Global Autodesk Inventor pointers */CComPtr<Application> aiApp;CComPtr<Document> aiDoc;/* Get Inventor program ID
[Code]....
View 1 Replies
View Related
Jan 3, 2014
Product: AutoCAD 2014
OS: Windows 7 64bit
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
View 5 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Jan 22, 2008
am currently working on a Flash site which is relying quite heavily on images with transparency.
my method has been to create PS3 images, save as TIFF, preserve transparency, and then import into Flash. However sometimes when I go to save, I do not get the TIFF options dialogue box, and when this happens Flash cannot import the image.
I found this quote on another post which might be related, but I do not know enough about photoshop to understand it!:
"Keep in mind that before you will have a transparency option when saving, you need to have either a clipping path or an alpha channel saved with the transparency info in it. (aka a mask)"
is this what I am not doing, and if so, how do create a clipping path or alpha channel to save my transparency info 'in'?
At the moment I seem to be able to get around the problem by opening a new image, dragging the layer into that, and then saving. but it's a pain in the arse and for some of them, I need to preserve the position of a layer more accurately...
View 1 Replies
View Related
Mar 24, 2009
In Photoshop CS4 the paint deposited by a brushstroke by a Wacom Intuos3 pen tool intermittently and unpredictably just stops mid-stroke after some while of a continuos stroke. This is a real problem when making simulated watercolor washes because these require a continuos application of paint using a brush with Wet Edges. When the paint just stops and the pen tool is removed from contact and then re-contacted, the paint starts again but now the new brushstroke sits on top of the old stroke and does not merge into it (as you want with a watercolor wash).
No brush controls are set to Fade and in any case the ink-stopping happens well into the continuos stroke - much later than a Fade control would affect it.
I'd be grateful for advice on how to stop this happening, please. Why is the paint flow just stopping? Is this a known problem with CS4?
CS4 is fine in other respects.
System:
Intuos 3 with Grip Pen and latest driver; Vista Ultimate 64 bit; Photshop CS4 64 bit; Q9550 cpu; 8 Gb ram; x2 WD velociraptor hdds; ATI Gigabyte 4850 graphics card with 1 Gb ram and 9.3 driver; Asus Xonar D2X sound card.
View 4 Replies
View Related
Dec 11, 2012
I notice the tranparent background flashing intermittently when I zoom or use any of the functions like layers, levels etc. I am using a new Win 8 system and have updated both photoshop CS6 and my video card drivers.
View 2 Replies
View Related
Oct 27, 2012
I have had VSX5 shutdown completely without any error messages while in Share>Create Disc>DVD. I have no problems in the Add Media step. I add a Video File, MPEG2, in Add Media and change the Thumbnail to have the title of the clip. I click Next to go to Menu & Preview. I select a main menu from the gallery, select Hide Object for one of the provided texts in the main menu, and edit the PRJxxxx one. I select the Edit tab. Select Customize>Motion Filter and Zoom In and Out options. When I click OK to leave the Customize Menu, VSX5 completely shuts down without any error messages. This doesn't occur every time. I have also clicked OK, returned to the Menu & Preview window, and then clicked Preview. After clicking Preview, VSX5 has shutdown. I have also had the problem after selecting Navigation buttons in Menu & Preview and clicking OK. I have opened an incident with Corel support, and they asked if I had Service Pack 1 installed and if my software and drivers are up to date. I have Service Pack 1 installed and everything is up to date.
View 14 Replies
View Related
Jan 17, 2014
The standard symbol for a stream on topographic maps is a blue line.
The standard symbol for an intermittent stream on topographic maps is a a blue line, with long segments interrupted regularly with a series of three dots. I can create a dashed line interrupted by two dots, but there aren't enough boxes for me to specify the third dot.
View 4 Replies
View Related
May 1, 2013
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC
View 3 Replies
View Related
Mar 24, 2012
I have been experiencing an intermittent crash of Photoshop CS5 in Windows 7 when saving. I cannot effectively reproduce the problem and am having difficulty diagnosing the cause of the it. I have updated Photoshop to 12.0.4.0 and still experience the crash.
Hardware:
AMD Phenom II X4 965 3.4GHz
8GB RAM
AMD Radeon HD 5450
Software:
Windows 7 Home Premium Version 6.1 (Build 7601: Service Pack 1)
Photoshop CS5 12.0.4 x64
View 8 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Sep 11, 2012
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
View 9 Replies
View Related
Feb 6, 2012
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
View 9 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Aug 8, 2012
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Aug 30, 2012
I am aware of the plot stamp available in the Plot Dialog box, however, we are looking at ways to imbed this info in the dwg. I currently have the WD_TB with an attribute for FULLFILENAME, an attribute for PLOT DATE, and an attribute for PLOT TIME12. So I get the information on the dwg. I would like to be able to run all these attributes as a string. I have tried FULLFILENAME|PLOT DATE|PLOT TIME12 with spaces, commas, ( ), " ", etc. and I do not know the proper syntax to get this to work. I have also tried (getenv "FULLFILENAME") or the getvar, in the title descriptions box.
View 1 Replies
View Related
Sep 1, 2011
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
View 1 Replies
View Related
Jun 25, 2013
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
View 2 Replies
View Related
May 9, 2011
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
View 1 Replies
View Related
Aug 14, 2012
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies
View Related
Apr 27, 2012
I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt
the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.
View 2 Replies
View Related
Sep 13, 2013
I have a user which we just installed Autocad Civil 3D 2014 on his computer that is running on a Windows 7 64-bit OS. However, he has had the same problem with Civil 3D 2011, 2012, and 2013 ever since we took him to 2011 in September 2011. So, it is not something new. It may have been around before then but my companies common practice back then was to freeze layers with a script file before plotting. While attending a class back in 2010 or 2011, he and his group were told to “do not use FREEZE on layers in Civil 3D” since things frozen did not get updated like they would if they were just turned off. So, they have been using the “ON/OFF” commands on all Civil 3D files since then.
Here is the problem:
A drawing, typical of this and other jobs he does, has a title block which is an xref in paper space and the site plan xref in model space. He can turn "OFF" certain layers from the site plan as viewed from paper space to remove clutter and then go to make a plot. After getting it set up to print and going to the preview the layers he has turned off appear in the preview and if he goes ahead and makes the plot or PDF those layers that were turned off will plot out.
The work-a-round they have been using ever since has been to go back into the file(s) and “FREEZE” the layers that were turned off, make the plots and then go back and “THAW” the layers before ending the drawing.
Things we have tried:
Set Visretain=1
Used the “Publish” command.
Set Layerevalctl=0 or 1
Is there a way to use ON/OFF instead and have the layers NOT plot out? OR, is this something that AutoCAD will not do regardless? Has it always been that way and we have been unaware of it through the past four releases?
View 5 Replies
View Related
