AutoCAD LT :: Lose All Hot Key Options And Can Only Use On Screen Icons
Nov 18, 2011
I am having problems with my acadlt.pgp file when I take my laptop home with me. I lose all hot key options and can only use the on screen icons, or I can do some commands (save, line, ect.) in longhand command. I was told by our I.T. guy to mention that it could be a "roaming profile" issue? How can I get my hot keys back when i'm disconnected from our work server?? This is actually becoming an occuring issue with others in our department as well.
View 1 Replies
ADVERTISEMENT
Sep 4, 2013
Where are the Scale Line Width options Icons located?
View 2 Replies
View Related
Oct 1, 2013
I have adobe photoshop elements 11. I am trying to figure out how to make the options bar and tool icons larger. I am straining my neck and eyes everytime I need to change tools, or change image size/resolution or save my image.
View 1 Replies
View Related
Aug 14, 2013
We have just finished installing a new Photoshop trial and opened the program but for some reason the menues and icons are so zoomed out that we can't see/read them
We have tried changing it in setting with no luck and we can't seem to chance the view into full screen due to the option seemingly being inactive. The program is for my mother and her vision is to poor to read any of it.
View 10 Replies
View Related
Aug 5, 2004
I have an upcoming job which requires me to design a series of icons for screen usage (32x32 pixels). I've had plenty of experience designing icons and logos for print, and would appreciate some tips on the method for designing them for screen.
Is the process just a matter of designing the logos in a vector program, importing them into a 72dpi PS file (32x32 pixels), and then optimising the file in Image Ready? (batch process?).
View 2 Replies
View Related
Dec 8, 2012
The icons don't come up at the top and bottom of the page in Organizer and I can't scroll to the bottom of the pagein Elements 11. It's like the entire page doesn't fit on the computer screen.
View 2 Replies
View Related
Nov 9, 2013
I recently upgraded from ps elements 10 to 12 and have noticed that all of my albums from 10 have disappeared, but to the lower right of each photo thumbnail there is a red album icon, and if I hang my mouse over it, it tells me what album it is in, but the album isn't listed on the left of the screen. I really do not want to recreate these albums, as it would be almost impossible. I am dealing with over 2000 photos over several years (downloaded from discs from the last several years). I need to have these albums back to print, delete, edit, share.
View 6 Replies
View Related
Dec 15, 2013
After upgrading to 5.3 I don't have minimize, resize or exit icons at top right of screen.
View 4 Replies
View Related
Nov 22, 2013
My photoshop cs3 opens but a white screen appears with no options and i cant work on my document. I tried uninstalling a reinstalling
View 1 Replies
View Related
Jul 31, 2013
I'm trying to use the develop module in lr for the first time, I normally use Breezebrowser. in Library mode.I have quick develop options, but in the develop module nothing shows on the right hand side of the screen at all.I have went into presents and ticked all the boxes but the only way I have options to develop are from the library module and that does not show the straigten option which i want. I have hit the D button until its worn out. This has been like this since I installed lr5, I used lr3 previously but only as a method to export images to zenfolio did not use anything apart from import and export. What do I need to do to get the options for the Develop module to show on screen? I have also hit the T for Toolbar several hundred times with no difference.
View 3 Replies
View Related
Jan 15, 2014
My tool options bar at the bottom of the screen all of a sudden disappeared. I need to change the font size. How do I get the tool options bar back?
View 7 Replies
View Related
Mar 2, 2013
I am experiencing two problems. One is the tool icons in Photoshop are disappearing on the screen. I move the cursor and see nothing on my screen.
The second problem is at other times the proper tool icon and function is not showing up and working. I select for example the pen tool and the hand tool icon show up and the function works as the hand tool not the pen tool?
View 8 Replies
View Related
Oct 21, 2011
I require an equally spaced fine line shading in an extrusion. I will take you through my process and then get to the problem.
I create an object (usually curved text), extrude it and break the extrusion apart; then I use the fill tool and open fill color dialog, change to palettes and select black, 20%; next I click on options and select Postscript options, from there I select line and an angle and frequency. This produces exactly the fine line shading I need, when I print it on my postscript printer.
The problem is that when I save the file as an .eps or .ai file to send to another prepress, the screen in their file always show up as dots not lines. I have not been able to find a way around this, the other fill types use tiling and that does not produce the same consistent shading.
View 1 Replies
View Related
Jul 2, 2013
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies
View Related
Apr 23, 2013
I've installed my new windows CS6, all my .psd files have the 'generic icons' windows give to files they don't recognize. Everything else has normal icons (i.e. Illustrator files) but the Photoshop files are blank. This is true whether I'm on any type of viewer format, i.e. details, thumbnails.
View 2 Replies
View Related
May 28, 2012
The loupe view on the second screen used to display information about the photo. I double clicked on it and it disappeared and no matter what I do I can't seem to get it back.
On the primary screen this can be added/removed or changed in Library Module by selecting the menu view->view options... which gets you to a settings window where you can set what shows. However, I cannot seem to find a similar thing for the second monitor.
View 1 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
May 14, 2013
Using Full Autocad 2013, no extensions.I have a directory full of 25 drawings, P&ID's to be exact. I've done all the drafting on them, and I need to publish the set. I used to publish them 24x36 to our plotter, but we have started sending out large plot jobs, so I need to publish to PDF. This normally isn't a problem at all. I set up the first drawing's layout tab to print. Everything is good. Preview it, all is good.
I open the publish box, add all the drawings layouts, use the page setup from the first drawings layout, select publish to PDF, set them to go to my normal folder, and publish. The drawings all publish, and everything is correct except that they all, instead of centering on the page, they center horizontally but go to the bottom of the sheet vertically. So I have a two inch margin on the top of the drawing and .5 inch or so on the bottom. I'm assuming this means that the publish can't find the drawing extents (we use plot to extents, center plot). So I go into all the drawings, zoom extents in all the layouts, and still it publishes the same.
Is there a variable I'm missing? If I plot just one it works and the plot is dead center of the page, publish more than one and it doesn't work.
View 8 Replies
View Related
Sep 29, 2011
I'm trying to import Excel charts (from Excel Office Home and Student 2010) into Autocad LT 2009. I've been doing this for years without a problem using Excel 2003 but now that I've upgraded to Excel 2010, I loose a lot of formatting (line weights are different, fonts are jumbled). how I can import with Excel 2010? BTW, I tried the trial of Autocad LT 2012 and still had the problem.
View 3 Replies
View Related
May 23, 2013
After saving several times I am not able to open the last saved version of the file when I open it after unexpectedly shut down. All my saving is gone! Nice to use DROPBOX to upload my last saving. Why are inventor undoing all my saving?
View 4 Replies
View Related
Aug 22, 2012
Recently upgraded from 2008 to 2013 (AC&IV) and now having the issue shown in the two attachments. Some of the leader text w/ iProps that had additional text added come thru ok, but straight iProps don't.
View 1 Replies
View Related
Oct 9, 2013
I'm working in a locked viewport. Every time I move the view with the middle mouse, I lose the selection. Is there a way to change this?
View 5 Replies
View Related
Jul 19, 2012
I have a drawing from an outside source which was not drawn to scale, and dimensioned in MS.. When trying to scale the drawing to 1:1, the dimensions lose their contents. When looking at the properties, the contents of the override do not jive with what is actually shown, and any attempt to edit, move, copy/paste, or scale the dimensions will delete the contents. I have not come across anything like this before. Drawing attached...
weird dimensions.dwg
View 9 Replies
View Related
May 17, 2011
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 9 Replies
View Related
Oct 11, 2011
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
View 4 Replies
View Related
May 8, 2012
I use DVIEW and my contour and slope labels shrink. I suspect the dreaded OE factor but cannot confirm.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
View 4 Replies
View Related
Aug 27, 2013
Is there a known issue with inventor 2014 and STP file exports loosing their colour settings?
We export PCB's and assemblies to Altium PCB CAD tools as step files and have just noticed that the colours don't travel well at the moment! The assemblies just end up light grey/white. I tried an earlier stp export dated 2011 and that opened fine in Altium but not any 2014 exports.
View 6 Replies
View Related
Feb 16, 2012
I have a custom world map for my fantasy series created in Photoshop CS5 (in 2D) that I want to turn into a globe. The image size is 14,400 x 7200 pixels. When I convert the image to a 3D shape, (New Shape From Layer -> Sphere) the resulting 3D image loses so much resolution, that when I view it at actual pixels, I can barely even read any of the text. Everything is extremely blurry. Is there a way to fix this or is it simply a process of converting the image from a 2D object to a 3D object?
View 2 Replies
View Related
Aug 13, 2011
I am attempting to pull .SWF files from a CD and edit in Pro X3. It is a training video that works with Explorer. Whenever I convert the files to AVI, Mpeg, etc., I lose the audio.
View 9 Replies
View Related
Jan 7, 2013
When I open an image in Photoshop it looks blurry at any zoom including 100%.Same image looks fine in GIMP, Explorer, etc.Here's an example. The left side is what it looks like in Photoshop.
[URL]
Below is my system info.
Adobe Photoshop Version: 13.0 x64Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1Physical processor count: 4Logical processor count: 8Processor speed: 3703 MHzBuilt-in memory: 6142 MBFree memory: 1209 MBMemory available to Photoshop: 5350 MBMemory used by Photoshop: 86 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce GTX 460/PCIe/SSE2
View 2 Replies
View Related
Apr 15, 2013
My Photoshop CS6 always crashes when I lose my Internet connection...why? This is really aggravating, particularly when I am traveling with my laptop and try to use Photoshop. As long as I have an Internet connection it is fine, but as soon as the Internet is no longer available the program stops working.
View 13 Replies
View Related
