Illustrator :: Time Zone / Daylight Savings Conflict Between Windows 7 And CS6
Apr 22, 2013
When Daylight Savings did its change this spring I started having problems saving files in Illustrator. I will go to save files, mainly .eps format, and it crashes Illustrator. I have changed my time zone to a zone that has not switched yet due to Daylight savings, and it works. Unfortunately as I find a new time zone, it also ends up hitting Daylight Savings, and I am back to square one. I have been searching both the Adobe site and the Windows site to find an answer to my problem, but am having no luck.
My proper time zone is
(UTC-07:00) Mountain Time (US & Canada)
I have even tried using Saskatchewan as they do not follow Daylight Savings, but it also creates crashes. I have tried many other time zones, the two that have worked so far are
(UTC-06:00) Guadalajara, Mexico City, Monterrey (worked for a little while but a time change a few weeks later messed it up)
(UTC) Casablanca (working on this time zone now, but an alert on my computer says time change coming up on the 28th)
I feel like I am running out of time, as I am not sure how many more time zones will work.
View 6 Replies
ADVERTISEMENT
Jul 27, 2013
I have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
View 2 Replies
View Related
May 23, 2013
After saving several times I am not able to open the last saved version of the file when I open it after unexpectedly shut down. All my saving is gone! Nice to use DROPBOX to upload my last saving. Why are inventor undoing all my saving?
View 4 Replies
View Related
Dec 19, 2012
Alright. You may ask why do you need multiple ?
Assume that i have 10000 PSD files in 10 different folders . I have a script that just save as them as PNG. And these files are each 3000x3000 px. My computer has 8 cores and 1 Photoshop exe is only using 1 cpu core. Also i have SSD raid system it has 750 mb read write per second
So right now i am wasting my time with running only 1 Photoshop exe instead of at least 4.
View 3 Replies
View Related
Jun 26, 2011
When I want to select multiple stuff, first time I can draw a windows some objects will be selected, second time multiple items can't be selected and I have to select them one by one. I was able to do it before hence I have changed something unintentionally, but what I have done?
View 4 Replies
View Related
Dec 18, 2012
I'm attempting to use CS3 on a Dell laptop- 64 bit- Windows 7.
When first installed it worked fine, then suddenly it was non-functional. It will open, but ANY request at all will cause it to freeze. I have to close it through Task Manager. I get no error messages, and when I went in to view the event viewer there is nothing there under Applications.
I've changed the default printer to a non-network but haven't done much else as I don't have administrative privileges on this (work) computer. We tried uninstalling and reinstalling and that did nothing.
View 5 Replies
View Related
Oct 1, 2012
How to label all the windows at a time with serial number?
I’m wondering if there is a way to label all the windows at a time with serial number?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Aug 6, 2013
i can't close this red zone. Open the CR2 files then photo in the ligt transform red zone.
how can closed this red zone
View 3 Replies
View Related
Dec 12, 2013
I've 2 FDO Layer (polygon). Layer1 contains zoning and Layer2 contains small area. The goal is to merge all polygons (1 or more) of Layer2 into only 1 polygon in each zone of Layer1.
I can do an FDO Overlay (Identity) to copy ID of zone to Layer2, but I don't know (except manually) how to merge polygons with 1 common information.
View 9 Replies
View Related
May 29, 2009
I would like to create a border that looks at the sheet number and then zones the horizontal borders in a continuous numbering scheme.
Sheet 1 = 1-8
Sheet 2= 9-16
etc...
This is a requirement that we have to meet with some customers. When drawings get to 30+sheets it becomes a pain to manually renumber the zones.
I would imagine this is done in VB code, but I have not programmed in a very long time. The formula would be something simple like;
if sheetnumber >1 then
for i =1 to 8
zone(i)i.value = zone(i).value +8
next i
end if
View 3 Replies
View Related
Jan 28, 2011
I am delving into the world of Display Themes in autocad architecture for the first time. What I am trying to do is apply a display them to a viewport that colour all spaces according to the zone to which they are attached.
I have made a generic space which I have used for all rooms. I have attached those spaces to various zones (i.e. Accounting and Finance, Engineering, Facilities etc.)
I am now trying to create a display theme that will color each zone accordingly. I am trying to do this by setting each theme rule to be;
propertyset definition = zone, property = name, condition = equal to, value = Accounting and Finance (etc.), operator = and.
I do this and nothing happens to the spaces. I have tried experimenting with other property sets attached to the spaces and different properties (ie space base area etc) and it works fine. So i'm pretty sure its just a case of finding the correct zone property to work with.
View 3 Replies
View Related
Jun 18, 2013
I'm having a problem with a Zone Border. I created the Zone Border like normal. I edited the appearance of the 'ABCD1234' text slightly:
- changed to center and middle justification.
- changed width to 120%
- changed color to black
The edits to 'ABCD' took effect and look just right. The edits to '1234' don't stay edited. I save the sketch, it looks okay, then when I add it to Sheet:1, the numbers have gone back to blue and lost the width and justification edits. But the letters are fine. What the heck is going on?
View 7 Replies
View Related
Jun 7, 2013
Is there a variable I can pull to get the coordinate system zone assigned to the drawing? For instance, if my drawing is in UTM coordinates, zone 13, is there a (retrievable) variable set to "UTM27-13"?
View 1 Replies
View Related
Mar 6, 2012
I use RocTek for cut/fil calculations, but the program is old and basic, I'm trying to transition to Civil 3D 2012 right now. Typically I create "no work zones" around my building footprints, so that I can do a more detailed take-off in those areas for over-excavations and that sort of thing. Right now I'm using Civil 3D to create an existing surface, a proposed surface, and then a volume from between the two. I thought if I just traced my proposed contours over the existing within the building footprint that I would get what I was looking for. However, analysis of the cut/fill volume shows that there are still some changes being made around the edges of the building.
Is there a specific way to make a proposed surface, but leave parts of the existing surface untouched?
See attached photo. The upper middle portion of the screen is where the building is (forgot to turn on layer).
View 2 Replies
View Related
Mar 7, 2013
Scren shot attached
I am hatching (a very quick sketch for info) but the hatch lines are going across the ploy line zone.
What happening. I cannot snap to these, but if in put a selection window acorss an of the lines, it will select the hatch.
I dont want to see these and dont want to have to hatch indivual rectangles. Never seen this before.
I cannot see anythign obvious in any of the settings.
View 2 Replies
View Related
Nov 18, 2011
How do I get the zone borders to number horizontally.
Sheet1 1-8
Sheet2 9-16
Sheet3 17-24
View 1 Replies
View Related
Feb 5, 2012
I often have an issue when trying to move an object on a layer crowded zone.
I select the right layer through the layer dock. But when I try to move my object, some auto selecter is probably ON and it selects another layer (that probably was right under my mouse) Any way I could disable that ?
When I used to use photoshop that was an easy obvious option "AutoSelect Layer" I don't get it how to do this in gimp
View 3 Replies
View Related
Jul 17, 2011
i need to export/retrive the Informations from "Space-Zone manager".
i can see the informations of surfaces and the openings in "Space/Zone manager", but no way to export or to extract them. the informations are also no "property set" information, which could be managed with schedules.
View 2 Replies
View Related
Jan 5, 2009
My home and office computers (WinXP Pro SP3) run super. I do not remember when I had blue screen last time, probably two or three years ago.
I have been using CS2 and upgraded to CS4 a week ago. Since then, I am getting blue screen so often. I use Flasget download manager for downloading including torrents. My hunch is that CS4 and Flashget downloading cause sort of a conflict, which results in blue screen.
When I do not use Flasget (i.e., no downloadin), my computers run smooth all day long, witout incurring blue screen. I wonder anybody has similar expereince or not.
View 3 Replies
View Related
Mar 22, 2009
I'm purchasing a new camera that's only supported with raw5 and I'd prefer to stay with cs3. I also have lightroom 1.3.
my choices are to go to cs4 (rather not) or use dng converter and use cs3 or go to lightroom 2.
My question is that since lightroom 2 uses raw 5x and cs3 4x, will I cause a mess in my computer? I did install the trial cs4 and found that it altered cs3 on me. I was told this wouldn't happen but there are some common files (the raw being one of them) and I actually had to wipe my system and reinstall everything.
View 8 Replies
View Related
May 18, 2013
I have been having an issue with files from my D800 when opening them in Photoshop CS6. I should note that this issue has never been a problem with any other camera that I have owned and used with CS6 (D3200, D7000, D80, Kodak Pro SLR N, Hasselblad H3D).
When attempting to open a number of files, ONLY from the D800, I seem to be limited to 10 or 11 files max. Once it loads that quantity I get an error message that it is out of resources. I had chalked it up to the tif files that I typically work with being 16-bit files at a little over 200MB each just being too large to open in any higher quantity.
Last evening I shot a graduation party for a friend and had inadvertently set the camera to shoot "basic" (lowest possible quality) jpg's at a file size of about 3MB each (still 7830 X 4912px). When I tried to load them into photoshop to do some dust clean-up and a few minor tweaks I was surprised to find that it still would only open 10 files before giving me the same error message.
how you may have adjusted settings in either the camera or in CS6 to resolve this issue. Again, it has never been an issue with any other camera I have used, and the Hassy is 39MP so file size shouldn't be the problem. It seems to be something in conflict between photoshop and files from that specific camera. To further elaborate and head off the next question, yes, this seems to happen with other D800's as well as I have rented a couple of others while this one was at Nikon for warranty repair and those cameras had the same issue with CS6.
View 10 Replies
View Related
Jun 3, 2008
I have 5.5 and it has been working fine for years. Recently installed a network printer/fax/copier (HP J6480) with ocr software. Since then, Photoshop won't run. I uninstalled it and tried to re-install. Software wouldn't even install.
View 6 Replies
View Related
Jul 12, 2013
I'm working on image in a collection that I created. I give image 4 stars and a color when I'm done working on them in the Development module.After opening the Preset and using some of them, as soon as I was giving a star rating to an image, I was automatically brought to the next image - which is not the normal behavior of Lightroom.So, I close the Presets "module" and re-clicked my Collection and then it stopped. It's hard to re-create a problem like this. But this is the only thing I've done differently and I've been retouching over 500 images without encountering this problem before.I'm working with the latest Lightroom 5 version.
View 6 Replies
View Related
Sep 25, 2013
I loaded my legacy actions to Photoshop CC. They worked as usual until I loaded the PShop updater today. One of my own custom actions is F5 which adds a darken only layer. F5 now deletes the currently selected layer. I have looked though the keyboard command menus, and see MANY key command options.
I still am not seeing an F5 command to delete layer. Not sure how many other key commands have been added. I can foresee some very uninted results with actions I have spec'd that may now be superseded by new key commands. There seems to be a legacy option, but the interface to all of this seems a bit complex.
View 4 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD converions?
Environment: Windows 7, CS6, Lightroom 4.
View 3 Replies
View Related
Jul 31, 2012
So I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
View 3 Replies
View Related
Oct 16, 2013
SInce I upgraded from Lightroom 4.3 to version 5.0 I and having problems when saving files to my computer. The anomaly is that it isn't all the time. The files are being saved with a .conflict extension. when exported from Lightroom. - For example tornado.conflict1 when i name the file tornado.
View 4 Replies
View Related
Feb 7, 2013
I am now getting multiple systems that will not open Photoshop CS 6. As soon as PS starts to open, Application Manager starts and prevents PS from opening. The two applications alternate for control with neither being able to open. This problem is also occurring with Illustrator CS 6 and now has started in Photoshop.
When the "fight" starts you have to do a forced shut down (power button for 10 seconds) in order to be able to login. Then Uninstalling the application, either by the Uninstaller of PS or by using the ELA uninstaller created when the Install package is created. Systems are Apple 10.8.2 with Adobe Application Manager Enterprise Created installer for Master Suite.
This has now appeared on six or seven systems of the approximatly 200 that got the install. The applications ran normally with no problems for about two weeks bu now the problems are popping up for no appearent reason.
View 17 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD conversions?
Environment: Windows 7, CS6, Lightroom 4.
View 2 Replies
View Related
Jan 20, 2013
I'm having trouble installing CS5 web premium - everything installs fine except Photoshop. I get the following error:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 3 error(s), 0 warning(s)
ERROR: Found payload conflicts and errors:
ERROR: - Adobe Flash CS5 depends on AIR2 For Adobe Flash Pro to be installed.
ERROR: - Adobe Flash CS5 depends on Players For Adobe Flash Pro to be installed.
FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.
View 2 Replies
View Related
