Photoshop :: New Key Commands / Conflict Custom Actions
Sep 25, 2013
I loaded my legacy actions to Photoshop CC. They worked as usual until I loaded the PShop updater today. One of my own custom actions is F5 which adds a darken only layer. F5 now deletes the currently selected layer. I have looked though the keyboard command menus, and see MANY key command options.
I still am not seeing an F5 command to delete layer. Not sure how many other key commands have been added. I can foresee some very uninted results with actions I have spec'd that may now be superseded by new key commands. There seems to be a legacy option, but the interface to all of this seems a bit complex.
View 4 Replies
ADVERTISEMENT
Oct 21, 2013
Can we place a custom menu and commands in Adobe Illustrator and invoke custom actions? The need for us is to call a C# DLL from these menu commands. I see C++ support but none on COM or NET support.
View 2 Replies
View Related
Jul 1, 2008
I have one psd file.
I want to do the same things in my few other images.
How I can extract actions/commands from the PSD file?
So I can apply same things with my few images.
I want to know what has been done with image (jpg) file.
View 1 Replies
View Related
Jul 31, 2004
Capture the following keyboard commands:
CTRL + A
EDIT > TRANSFORM > FLIP HORIZONTAL
CTRL + D
And save it as an Action called am_Flip_Horizontal.atn. Then how would I go about loading that action automatically each time PS boots and assigning a keyboard shortcut to it (say, CTRL + /) ?
I notice that some Actions are black, some are red. Some have a checkmarks and others have toggle icons. I think I have the concept down, but just not the how-to knowledge.
View 4 Replies
View Related
Jul 1, 2008
I have one psd file.
I want to do the same things in my few other images.
How I can extract actions/commands from the PSD file?
So I can apply same things with my few images.
I want to know what has been done with image (jpg) file.
View 1 Replies
View Related
May 3, 2012
Initiated a project with the AutoDesk .net templates for VB.net. I've kept the Extension Application loader that's part of the template, however commands that reside within my other classes aren't recognized. The extension is running because it's responding properly to events that trigger, however I can't call my custom command names from the command line. Could this be a function of the namespace that the commands are in?
Namespace IWC ' This class is instantiated by AutoCAD once and kept alive for the ' duration of the session. If you don't do any one time initialization ' then you should remove this class. Public Class MyPlugin Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize Dim NewLayer = New IWCLayer NewLayer.IWCLayerSysStart() End Sub Public Sub Terminate() Implements IExtensionApplication.Terminate MsgBox("Layer System Terminating",
[code].......
View 9 Replies
View Related
Apr 9, 2013
(CS6 - 64 bit) Anyhow, somehow my blur gallery (Tilt-Shift, Iris and Field) got screwed up. Whenever I brought them up, they wouldn't work and I couldn't get out of the gallery.
I called tech support and after taking control of my computer, he reset my Preferences and all was well - or so I've thought. Now I find I've lost my custom Actions and Panels.Is there a way to retreive these and other things I may have lost, or must I start from square one?
View 4 Replies
View Related
May 11, 2012
I created a command that I no longer use. I actually made a spelling error upon creating it "SUPECLOSE" and I want to delete it.
This is how I created this command: I typed in ALIASEDIT in order to add a new alias to a command.
I then clicked on the "Add" button.
In the "Alias:" field, I typed in "xx"
And in the "AutoCAD Command:" field, I typed in "SUPECLOSE" - which isn't actually an autoCAD command. "SUPERCLOSE" is the command I use to run a custom LISP routine that I created. Upon hitting pressing "OK" to this, AutoCAD prompted me with: "'SUPECLOSE' is a new command, Do you want to add this to your list of commands?"
I said yes. And then shortly afterwards realized the spelling error I had made. Problem is...I don't know how to access this list and delete the new command that I had just created (which does nothing).
View 3 Replies
View Related
Aug 14, 2013
I have the "create section view" command.
Ok, I'd want to have other (others) custom command "create section view2" and optionally call it from an icon.
These commands are saved with the drawing? ( I think yes). Would be there a possiblity to have easy access to this elements to deal with them ? Is it impossible?
Having custom commands cloned and customized from existing
View 1 Replies
View Related
Jan 16, 2013
I built a new computer, Windows 8, 64 bit.
Installed Acad LT 2011 64 bit.
Did an export of custom settings from a Windows 7 64 bit LT 2011 installation, imported those to the new Windows 8 LT 2011 installation. This was done using the Start>Programs menu. (I ditched the "Metro" stuff.)
The setup looks mostly the same, but when I go to use it, the icons don't match the commands. I have toolbars down the left and right sides with many icons. The icon for Hatch runs the Polygon command. The Move icon runs the Offset command. Lots of them are screwed up.
The ribbon commands along the top seem to be OK.
View 2 Replies
View Related
Feb 26, 2013
I didn't like the name of my custom Pulldown that I made:
DSI-Menu.cuix
I Did a Save as:
DSI-Menu_sc.cuix
All the custom Commands list the original DSI-Menu as the source. Can I somehow change that so that the source is DSI-Menu_sc?
View 1 Replies
View Related
Jan 5, 2013
I just spent two days automating a large project with Illustrator CS6 actions. I suppose I should have expected Illustrator to crash at some point during this process but I didn't and, of course, it did. Upon starting Illustrator back up after the crash, I found that all dozen or so of my complex actions were gone.
I did a bit of googling and it seems that AI doesn't save these to disk anywhere; rather it just keeps them in memory until they're explicitly saved. That is, creating an action doesn't seem to actually store it anywhere.
View 2 Replies
View Related
Jan 5, 2009
My home and office computers (WinXP Pro SP3) run super. I do not remember when I had blue screen last time, probably two or three years ago.
I have been using CS2 and upgraded to CS4 a week ago. Since then, I am getting blue screen so often. I use Flasget download manager for downloading including torrents. My hunch is that CS4 and Flashget downloading cause sort of a conflict, which results in blue screen.
When I do not use Flasget (i.e., no downloadin), my computers run smooth all day long, witout incurring blue screen. I wonder anybody has similar expereince or not.
View 3 Replies
View Related
Mar 22, 2009
I'm purchasing a new camera that's only supported with raw5 and I'd prefer to stay with cs3. I also have lightroom 1.3.
my choices are to go to cs4 (rather not) or use dng converter and use cs3 or go to lightroom 2.
My question is that since lightroom 2 uses raw 5x and cs3 4x, will I cause a mess in my computer? I did install the trial cs4 and found that it altered cs3 on me. I was told this wouldn't happen but there are some common files (the raw being one of them) and I actually had to wipe my system and reinstall everything.
View 8 Replies
View Related
Aug 31, 2004
I downloaded a couple of actions from the web to my actions palette and they worked fine, but then I got greedy and downloaded a few more and thats when things went south. Now none of the actions work - by not working I mean when I mouse over the Play Selection icon at the bottom of the action palette I get that little circle with a line through it. This happens with the PS default actions as well (I also get the circle on the Stop Playing/Recording and Begin Recording icons).
Somewhere in the following is probably what messed things up.
I downloaded actions to my computer in zip files. Copied them over to the actions folder (or somewhere) and unzipped them. I went back to the actions palette and hit load actions and loaded them. On the second set of actions that I downloaded I remember thinking why am I copying and pasting these files - I bet I should cut and paste them, so I did and that may have been the start of the great crumble of 2004. PhotoShop help says: (under Saving and loading actions) Actions are automatically saved the the Actions Palette folder in PS7.0 Settings folder. If this file is lost or removed, the actions you created are lost.
I have searched for the settings folder and couldnt find it, but the actions still show up on the actions palette - they just dont run.
Im a little fuzzy on the details on the above steps. In fact, I probably did something different on each download.
one more thing, I reloaded PhotoShop, but still nothing.
View 9 Replies
View Related
May 18, 2013
I have been having an issue with files from my D800 when opening them in Photoshop CS6. I should note that this issue has never been a problem with any other camera that I have owned and used with CS6 (D3200, D7000, D80, Kodak Pro SLR N, Hasselblad H3D).
When attempting to open a number of files, ONLY from the D800, I seem to be limited to 10 or 11 files max. Once it loads that quantity I get an error message that it is out of resources. I had chalked it up to the tif files that I typically work with being 16-bit files at a little over 200MB each just being too large to open in any higher quantity.
Last evening I shot a graduation party for a friend and had inadvertently set the camera to shoot "basic" (lowest possible quality) jpg's at a file size of about 3MB each (still 7830 X 4912px). When I tried to load them into photoshop to do some dust clean-up and a few minor tweaks I was surprised to find that it still would only open 10 files before giving me the same error message.
how you may have adjusted settings in either the camera or in CS6 to resolve this issue. Again, it has never been an issue with any other camera I have used, and the Hassy is 39MP so file size shouldn't be the problem. It seems to be something in conflict between photoshop and files from that specific camera. To further elaborate and head off the next question, yes, this seems to happen with other D800's as well as I have rented a couple of others while this one was at Nikon for warranty repair and those cameras had the same issue with CS6.
View 10 Replies
View Related
Jun 3, 2008
I have 5.5 and it has been working fine for years. Recently installed a network printer/fax/copier (HP J6480) with ocr software. Since then, Photoshop won't run. I uninstalled it and tried to re-install. Software wouldn't even install.
View 6 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD converions?
Environment: Windows 7, CS6, Lightroom 4.
View 3 Replies
View Related
Nov 24, 2013
My computer crashed and I removed all apps and reinstalled so now none of my actions appear. However I do have a backup file of all of them and want to reinstall but before when I was using cs6 ( Im assuming same thing as CC as it was all on the subscription plan ) I would click actions then the right arrows and it would bring me a big screen of all the actions ( even the ones that were just preloaded in ps ) and it was a big box with all the actions and some options to record etc...Now that box isn't there and it's just a single column drop down menu.
View 1 Replies
View Related
Feb 7, 2013
I am now getting multiple systems that will not open Photoshop CS 6. As soon as PS starts to open, Application Manager starts and prevents PS from opening. The two applications alternate for control with neither being able to open. This problem is also occurring with Illustrator CS 6 and now has started in Photoshop.
When the "fight" starts you have to do a forced shut down (power button for 10 seconds) in order to be able to login. Then Uninstalling the application, either by the Uninstaller of PS or by using the ELA uninstaller created when the Install package is created. Systems are Apple 10.8.2 with Adobe Application Manager Enterprise Created installer for Master Suite.
This has now appeared on six or seven systems of the approximatly 200 that got the install. The applications ran normally with no problems for about two weeks bu now the problems are popping up for no appearent reason.
View 17 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD conversions?
Environment: Windows 7, CS6, Lightroom 4.
View 2 Replies
View Related
Jan 20, 2013
I'm having trouble installing CS5 web premium - everything installs fine except Photoshop. I get the following error:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 3 error(s), 0 warning(s)
ERROR: Found payload conflicts and errors:
ERROR: - Adobe Flash CS5 depends on AIR2 For Adobe Flash Pro to be installed.
ERROR: - Adobe Flash CS5 depends on Players For Adobe Flash Pro to be installed.
FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.
View 2 Replies
View Related
Nov 17, 2006
I like to put my actions somewhere special on my hardrive, not in apps folder.
Now, in past, when I saved actions CS2 would "remember" where this folder was, making real easy to save.
Lately, it keep defaulting to save as in the app folder-- even though I did navigate to my special area on last save as.
View 9 Replies
View Related
Jul 12, 2013
I'm working on image in a collection that I created. I give image 4 stars and a color when I'm done working on them in the Development module.After opening the Preset and using some of them, as soon as I was giving a star rating to an image, I was automatically brought to the next image - which is not the normal behavior of Lightroom.So, I close the Presets "module" and re-clicked my Collection and then it stopped. It's hard to re-create a problem like this. But this is the only thing I've done differently and I've been retouching over 500 images without encountering this problem before.I'm working with the latest Lightroom 5 version.
View 6 Replies
View Related
Jul 31, 2012
So I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
View 3 Replies
View Related
Oct 16, 2013
SInce I upgraded from Lightroom 4.3 to version 5.0 I and having problems when saving files to my computer. The anomaly is that it isn't all the time. The files are being saved with a .conflict extension. when exported from Lightroom. - For example tornado.conflict1 when i name the file tornado.
View 4 Replies
View Related
Feb 29, 2012
How to avoid the conflict between the “attribute” values?
I wanted to label the points (stored in txt file) using the lisp file ascpoint.lsp; This requires to build a block with 4 attribute values,But how to ensure that there is no conflict between the labels of the coordinates represented in the 4 attributes? They may overlap depending on the number of characters of the value of each attribute (coordinate).
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Nov 22, 2011
I created a drawing template, saved on companies common drive, not local. When I created it I also created BOM to be filtered for certain iproperties. When I go "new" and open a new drawing file from the template I get the message about the style conflict and when open BOM in a new drawing I get default columns not the columns I set up in iproperties.
What is the process of setting up/changing styles?
View 4 Replies
View Related
Dec 17, 2013
I have a trouble with metadata conflicts.
I'm not making any adjustment in Lr. I'm just opening, editing and saving a TIFF file in Ps and I'm always getting the following warning. What can cause a metadata conflict for such a case?
View 2 Replies
View Related
Feb 6, 2009
Whenever I open a drawing in a certain project this error message always pops up.Some of the message details are:
-Parameter ERRCODE; Value 786433
-Error 786433 - Conflict between data tables in open drawings (57 consecutive occurrences)
-Parameter: APPLNAME Value: ad
-Parameter: CLASSNAME Value: airfield
this message box stops popping up when I open the drawings?
View 4 Replies
View Related
Apr 4, 2013
I find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
View 1 Replies
View Related
