AutoCAD Inventor :: Zone Border Edits
Jun 18, 2013
I'm having a problem with a Zone Border. I created the Zone Border like normal. I edited the appearance of the 'ABCD1234' text slightly:
- changed to center and middle justification.
- changed width to 120%
- changed color to black
The edits to 'ABCD' took effect and look just right. The edits to '1234' don't stay edited. I save the sketch, it looks okay, then when I add it to Sheet:1, the numbers have gone back to blue and lost the width and justification edits. But the letters are fine. What the heck is going on?
View 7 Replies
ADVERTISEMENT
May 29, 2009
I would like to create a border that looks at the sheet number and then zones the horizontal borders in a continuous numbering scheme.
Sheet 1 = 1-8
Sheet 2= 9-16
etc...
This is a requirement that we have to meet with some customers. When drawings get to 30+sheets it becomes a pain to manually renumber the zones.
I would imagine this is done in VB code, but I have not programmed in a very long time. The formula would be something simple like;
if sheetnumber >1 then
for i =1 to 8
zone(i)i.value = zone(i).value +8
next i
end if
View 3 Replies
View Related
Nov 18, 2011
How do I get the zone borders to number horizontally.
Sheet1 1-8
Sheet2 9-16
Sheet3 17-24
View 1 Replies
View Related
Jan 31, 2013
I'm using Inventor Pro 2013 as a single user (no vault). see the attached error. I was placing parts and I think I pulled one outside the project folder?? I got something about changing directories and I accepted it. That may be what happened but I'm not sure. I also noticed that in the projects box my project says (read only).
View 9 Replies
View Related
Sep 18, 2013
When I make changes through styles editor and try to save them, I get a window that pops up saying "Style library (C:Vault_WorkDesign Data) cannot be saved because it is damaged".
View 2 Replies
View Related
Oct 10, 2013
How can I go about editing the text for a holethread note? I want to proceed the default text w/ the quantity note.
E.g.: 7/8 THRU
What I want: ?X 7/8 THRU
View 3 Replies
View Related
Jun 13, 2013
inventor 2013- single user
working with an assembly of about 100 parts
file was working fine until about the last large componet i am working on.
when I edit a part and then hit return the ("excuting end edit componet " in lower left hand ) it seems to take some time to compute. This part i have a lot of sketches that are tide to other componets to create the postion of those. so i think this is the reason. i supressed this compent and the file got about 75% better so I am thinking that this is my issue.
for example when i need to make a cut out in one compent that is overlaying another I create a construction projection of the componet and then use this to off set or create a feature from that so that if I change the other one it changes the cut out. I am thinking the computer is having to figure out what is changing everytime.
View 9 Replies
View Related
Apr 5, 2013
What's the purpose of making modeling edits at the assembly level if those edits don't show up in a drawing of the parts? Sure, it makes the assembly look prettier and more true to the final product, but say I make a bunch of cuts, holes, etc. at the assembly level, but then I make a drawing for one of the parts that was affected... those edits don't show up on the part itself, so all those edits are of absolutely no use to me when I need to give the guys in the shop a detail drawing of how to make the part. Why I would make edits at the assembly level?
View 9 Replies
View Related
Feb 27, 2012
I have an idw that contains a parts list in which some of the information has been edited. The edited text is shown in blue. I would like to revert these fields to the values that exist in the BOM and in iproperties. How do I do this?
View 4 Replies
View Related
Jun 5, 2012
Initially the family was customized to add a few of our part numbers and suppress some members we weren't using.
There were some duplications in the table that were removed as well (This has been a known issue since 2009).
It has been working for several months without a problem.
Yesterday I needed some new sizes so I unsuppressed a few members and updated the part number and grade information .
Now when I try to place any instance from this family Inventor crashes.
I have found that the family will work if all members are unsuppressed. If only the customized members are left unsuppressed Inventor will crash on placement.
I ran some more tests by starting fresh and copying a read-only version from the ANSI library. I recreated the original library and it functions with the customizations untill I add a custom column (Grade) to use as a key.
How can a family go from functioning to not by only modifying a few fields?
2010 Suite-SP4 64bit
View 3 Replies
View Related
Dec 12, 2013
I've 2 FDO Layer (polygon). Layer1 contains zoning and Layer2 contains small area. The goal is to merge all polygons (1 or more) of Layer2 into only 1 polygon in each zone of Layer1.
I can do an FDO Overlay (Identity) to copy ID of zone to Layer2, but I don't know (except manually) how to merge polygons with 1 common information.
View 9 Replies
View Related
Jan 28, 2011
I am delving into the world of Display Themes in autocad architecture for the first time. What I am trying to do is apply a display them to a viewport that colour all spaces according to the zone to which they are attached.
I have made a generic space which I have used for all rooms. I have attached those spaces to various zones (i.e. Accounting and Finance, Engineering, Facilities etc.)
I am now trying to create a display theme that will color each zone accordingly. I am trying to do this by setting each theme rule to be;
propertyset definition = zone, property = name, condition = equal to, value = Accounting and Finance (etc.), operator = and.
I do this and nothing happens to the spaces. I have tried experimenting with other property sets attached to the spaces and different properties (ie space base area etc) and it works fine. So i'm pretty sure its just a case of finding the correct zone property to work with.
View 3 Replies
View Related
Jun 7, 2013
Is there a variable I can pull to get the coordinate system zone assigned to the drawing? For instance, if my drawing is in UTM coordinates, zone 13, is there a (retrievable) variable set to "UTM27-13"?
View 1 Replies
View Related
Mar 6, 2012
I use RocTek for cut/fil calculations, but the program is old and basic, I'm trying to transition to Civil 3D 2012 right now. Typically I create "no work zones" around my building footprints, so that I can do a more detailed take-off in those areas for over-excavations and that sort of thing. Right now I'm using Civil 3D to create an existing surface, a proposed surface, and then a volume from between the two. I thought if I just traced my proposed contours over the existing within the building footprint that I would get what I was looking for. However, analysis of the cut/fill volume shows that there are still some changes being made around the edges of the building.
Is there a specific way to make a proposed surface, but leave parts of the existing surface untouched?
See attached photo. The upper middle portion of the screen is where the building is (forgot to turn on layer).
View 2 Replies
View Related
Mar 7, 2013
Scren shot attached
I am hatching (a very quick sketch for info) but the hatch lines are going across the ploy line zone.
What happening. I cannot snap to these, but if in put a selection window acorss an of the lines, it will select the hatch.
I dont want to see these and dont want to have to hatch indivual rectangles. Never seen this before.
I cannot see anythign obvious in any of the settings.
View 2 Replies
View Related
Jul 17, 2011
i need to export/retrive the Informations from "Space-Zone manager".
i can see the informations of surfaces and the openings in "Space/Zone manager", but no way to export or to extract them. the informations are also no "property set" information, which could be managed with schedules.
View 2 Replies
View Related
Feb 19, 2013
Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies
View Related
Aug 6, 2013
i can't close this red zone. Open the CR2 files then photo in the ligt transform red zone.
how can closed this red zone
View 3 Replies
View Related
Feb 5, 2012
I often have an issue when trying to move an object on a layer crowded zone.
I select the right layer through the layer dock. But when I try to move my object, some auto selecter is probably ON and it selects another layer (that probably was right under my mouse) Any way I could disable that ?
When I used to use photoshop that was an easy obvious option "AutoSelect Layer" I don't get it how to do this in gimp
View 3 Replies
View Related
Apr 22, 2013
When Daylight Savings did its change this spring I started having problems saving files in Illustrator. I will go to save files, mainly .eps format, and it crashes Illustrator. I have changed my time zone to a zone that has not switched yet due to Daylight savings, and it works. Unfortunately as I find a new time zone, it also ends up hitting Daylight Savings, and I am back to square one. I have been searching both the Adobe site and the Windows site to find an answer to my problem, but am having no luck.
My proper time zone is
(UTC-07:00) Mountain Time (US & Canada)
I have even tried using Saskatchewan as they do not follow Daylight Savings, but it also creates crashes. I have tried many other time zones, the two that have worked so far are
(UTC-06:00) Guadalajara, Mexico City, Monterrey (worked for a little while but a time change a few weeks later messed it up)
(UTC) Casablanca (working on this time zone now, but an alert on my computer says time change coming up on the 28th)
I feel like I am running out of time, as I am not sure how many more time zones will work.
View 6 Replies
View Related
Aug 23, 2013
I have been having trouble storing attributes on border definitions. I have multiple borders which need to be used for different types of drawings. I have developed a tool which will use the desired border pragmatically and it works as planned. Currently the logic selects a border based on name, but since this can be edited by the user I need a more dependable way of retrieving a border. I had thought attributes would be the answer, but I'm running into problems. The attributes just won't stick. I've tried to add them manually through the API and with the Attributes Helper tool released.
See below for the code I'm using to add the attributes
Dim oAttr As Inventor.Attribute Dim oAttrSet As AttributeSet Set oAttrSet = oBorderDef.AttributeSets.Add("TestAttributeSet", True) oAttrSet.Copy = True Set oAttr = oAttrSet.Add("TestAttribute", kIntegerType, 12345) Debug.Print oAttrSet.Parent.Parent.Name & " " & oAttrSet.Name & " " & oAttr.Name & " " & oAttr.Value
It will print information leading me to believe that the attribute was added, but if I try to retrieve it either through the attributemanager or manually cycling through the border definitions no attributes exist.
View 4 Replies
View Related
Dec 5, 2012
I have the default border set in all my templates but I want to add an outside border to the default border (so everything is ultimately enclosed in a large box). How can I add that to the default? I see where I can define a new border but I can't have two borders on the same drawing so how do I combine them? I want to keep the existing "smart" default border that lets me choose how many zones etc.
View 9 Replies
View Related
Jul 24, 2013
I have been creating a drawing of a Assembly and realized that I had drawn it on a Company "D" size border by mistake. How do I change it to a "B" size border without starting over?
View 5 Replies
View Related
Feb 19, 2013
Border's Rangebox with Apprentice?
View 1 Replies
View Related
Feb 5, 2013
I use two different measuring system IMPERIAL and METRIC.
What I want is to be able tell at a glance, by having different color border and Title-block Text is which one of the system of units I'm using
So what I'm wanting to do is create a Metric Sheet template with on color, Border, Title Block Text and a different color for the Imperial.
I've tried changing the color using the Style Center but that affects both templates, I've tried editing the title-block text saving the template but on opening it has changed back to the defaults set in the style settings and dose not hold those that I set.
What I don't what to be doing is changing them after opening, as at some stage I'll forget.
View 3 Replies
View Related
Dec 2, 2012
I wanna to reduce the text size in border or guide me to create own border creation. Explain through photos or give me a step by step procedure so that i can understand easily because i am new to inventor.
View 1 Replies
View Related
Jun 25, 2012
I am creating a standalone .exe with VB.net that opens an Inventor .idw and creates a few custom tables. I want one of the tables to have no border at all.
So far I have tried:
Dim oFormat As TableFormat oFormat = oInvSheet.CustomTables.CreateTableFormat oFormat.InsideLineWeight = 0 oFormat.OutsideLineWeight = 0 oCustomTable_Hardware.OverrideFormat = oFormat
But that does not hide the border lines.
I've found no similar code to try out that dealt with table borders or that sort.
View 2 Replies
View Related
Mar 22, 2013
Is there a way to access any data of any Border in a Drawing files when creating a sketch in the file?
I'm trying to make a Title Block that take up the whole length of the Border bounded page and 10 mm high, anchored on the bottom.
Currently I had the Default Border "changed" by Inserting it and changing the margins to fit to approximately my printer's printable area. It seems at this stage when I created a new title block defn I'm basically given a blank sketch with the origin at the bottom left as my only "snap point".
I found one through subject suggestion about using iLogic to change the size, but that isn't exactly what I'm trying to do as that seems just a switch for different Title Blocks that's been made up.
I thought about just drawing the title block in with the border, but I don't think that's the right way to do it.
Is there any way to draw your Title block in this case beside manually figuring out how big the Border is and dimension with that raw number?
(Just curious as it would be just a simple subtraction, but if I changed the Border margin I would have to repeat the arithmetic...)
View 4 Replies
View Related
Jun 30, 2013
I'm currently using Inventor 2013. but I've seen this in earlier versions of Inventor.
After creating a view within a drawing sheet, if you RMB on the view label, an option for Constrain to View Border appears.
What does this option do and how is it used? I don't see anything happening when I use this option.
View 5 Replies
View Related
Aug 10, 2012
I need some VBA code that will allow me to get the Filename from the border of a drawing. I've got code to get to the text of the filename, but I need to get the filename itself. Hope that males sense. Here's the
Public Sub GetModelFilename()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
[Code]...
What the code returns is the text <FILENAME>. What I need is the filename itself.
View 8 Replies
View Related
Nov 5, 2013
When i create a drafting i use ISO.idw template. I delete the default title block and the default border and then i create my personal title block and border. How to save the new title block and the new border somewhere in "Inventor's memory" and use them in other draftings?
View 1 Replies
View Related
