Photoshop :: Layers Not Selected As Defult For PSD...
Feb 9, 2009
I find all the Layers are merged into one! I usually I make a dozen or so files before choosing the best one to go back and edit.
After starting up again today I realised that I needed to make a slight alteration on a previous poster and discovered that there was only a single layer contained within the PSD file with all the content merged together! I checked other files and they were all the same! This means I have at least 20 PSD files that are practically useless!
I cannot understand why Layers was not selected as default in the save as window!! I certainly never turned it off in the save as window and no one else uses my computer... Unless it had something to do with the fact that when I was saving PDF files of the same documents and unclicked the "preserve Photoshop illustrating capabilities" in the second window that pops up so the PDF would not be as big... but even so I did not click it in the save as window... and therefore assumed it would only apply to PDF files! If this is the reason then I'm bloody annoyed that they would implement such a stupid feature! What other use is there for PSDs then to preserve the layers!?
I have never had this problem before on other computers or copies of Photoshop... Unless this has something specifically to do with CS3?
I dont suppose there is any way to retrieve my lost layers so I can edit the files? Or do I just have to start all over again?
View 5 Replies
ADVERTISEMENT
May 15, 2012
I am not able to move layers around on my layout once I have selected them. What could be wrong?
View 17 Replies
View Related
May 14, 2013
Basically I have several maps which have had black lines drawn on them - I would like to separate the different 'sections' of each map based on the boundaries. I am able to select the black line with the magic wand tool - however this isn't proving much use .
Here is an image to further demonstrate what I'm trying to achieve:
View 7 Replies
View Related
Oct 9, 2012
I'm trying to find a script that batch rename/renumber a group of selected layers. So far I've been able to find a script that renames every single layer in a Photoshop document (overkill). Or there's the CS6 Tab rename trick (too slow).
I routintely export PSDs from Illustrator for use in After Effects. But in Photoshop, I'll get a couple hundred layers named <path> or <path> + <path> or <group>. Renaming by hand is out of the question. But I don't want to rename every layer the same.
View 4 Replies
View Related
Aug 8, 2013
When I followed the step 2 from this tutorial:[URL] said Could not use the move tool because no layers are selected.
View 2 Replies
View Related
Aug 6, 2009
I'm making an animated GIF, and what I want to do is overlay each layer of the animation with a layer of text. I know the hard and long way by creating a copy of the text layer and merging it with each and every layer of the animation, but is any faster way of doing this?
View 4 Replies
View Related
Dec 11, 2012
how to change the colour of the selected layer in the layers pallete? It's quite annoying the way it is (Dull grey/blue) and sometimes hard to see what layer's selected?
I prefer the brighter blue on my other computer!
View 2 Replies
View Related
Oct 2, 2013
I frequently encounter this problem across numerous versions of PS (CS4 - CS6)I like to CTRL+click on my layers to select them for convenience. If in the layers panel, I have a Layer Mask selected (that is, the white border highlight is around the alpha mask thumnail) and the mask is unlinked from the layer itself (there is not a link icon bewteen the layer thumb and alpha mask thumb), the CTRL+click feature seems to be disabled.
I have to relink the mask to the layer in order to restore the functionality. This occurs regardless of the order of any of the layers in question.Is this correct?
View 2 Replies
View Related
Jun 18, 2009
I have this file with multiple layers of text.
I want to print the file with these layers selected individually, so that if I have two text layers "Cow" and "Dog", I get two similar images with different text.
How would i automate this? It would take a lot of work to select each layer and save the files individually.
View 2 Replies
View Related
Jan 19, 2012
According to 'About Lightroom;
this is what I'm running:
<Lightroom 3.6, Camera Raw 6.6>
I used to 'merge to panorama', or 'open as layers' in Photoshop regularly, but today it no longer works. When I try, the message comes up: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.6 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
When I go to Photoshop Help Menu, 'no available updates at this time' is the message that comes up. I manually downloaded the Camera Raw 6.6, but to no avail.
When attempting to edit using PS, the program DOES open, but nothing happens... the files do not appear. They DO open individually when Edit in Photoshop CS4 is selected, but I prefer the 'open in layers' option, and often use the 'merge to panorama'...
View 5 Replies
View Related
Apr 15, 2013
If I right click on on the shape tool and try to select any of the choices nothing happens, the menu keeps showing. I also can't move any layers anymore using the move tool.
Seems like a focus issue perhaps? Latest Windows CS6 Photoshop updated to the latest version.
View 1 Replies
View Related
Jul 10, 2012
When I select a layer, it is highlighted in grey (in the layers palette) and I am unable to edit it. My current process for making a layer editable is as follows: Select layer (highlighted in grey)Double click layer (opens "Layer Styles" dialogue box)Close "Layer Styles" dialogue boxLayer is now highlighted in blue and can be edited. I am currently running Photoshop CS5.1 on a windows machine which is using Windows 7.
View 2 Replies
View Related
Nov 15, 2013
Is there a way to make PDFs of layers which are turned on in Illustrator, from Illustrator itself?
If there is, I'm not seeing it.
CS6, latest update
OS X 10.8.5
View 1 Replies
View Related
Jun 26, 2013
I have functions that will freeze or thaw layers in a viewport, but I was wondering how to just check which layers are thawed/visible in a selected viewport.
View 1 Replies
View Related
Jun 22, 2012
Working with many layers 60+ is great, but most of the time we have many that are not selected i.e. visible.sometime 30+ those layers are most of the time not needed anymore or make it too crowd in the layer box, making layer selection and handling messy.
The best way is to remove them from the PDN, while keeping only the visible selected. But removing the "not selected" layers one by one is time consuming and again, accidents happen.
Three solutions .
A simple way to do it, is just add under "edit menu" or the "Layer menu" the following. "Create new PDN from selected visible layers"..
OR
add to the "Save As" the option to "Save selected visible layers only"
OR the long way, that has its good things in it too.
Add the option to INVERT the layers visibility selection, and then the option to remove/delete selected layers. (of coarse add an approval "are you sure box")
This option would even be great for other uses when we need to switch back and forth between many visible layers. for example when making animations etc.
View 2 Replies
View Related
May 10, 2013
I've been wondering, is there some trick to starting 2 Bezier lines at the same start- and end-points? Or do I have to eyeball it? Can I reactivate an old, previously selected line after something else has been selected? Is it possible to keep several lines selected in separate layers apart from each other?
View 1 Replies
View Related
Jun 5, 2008
I wanted to ask if by chance any of the scripting gurus here happen to have written an AI script that will take a number of selected sublayers/sub-sublayers and move them so they become top-level layers?
I am really needing this very badly, given that After Effects can only handle AI layers as separate entities. So I find myself moving tens, even hundreds of nested sublayers to the top level all the time.
Is it possible this script exists already?
View 16 Replies
View Related
Jan 22, 2014
I am using this script to find and replace words in layers. (The script only targets particualr words, rather than the whole layer name).
I would like to make it so it targets selected layers only.
I have found this script which loops through selected layers only, but I am not sure how to add the find and replace layer name functioality.
View 7 Replies
View Related
Apr 3, 2014
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies
View Related
Aug 23, 2013
I have finished my works using only one layer( a bad habit I know) and now I need to export them as PSD, and as You know it needs Layers so it can be editable on Photoshop.
I know the fact that I should import all the objects in single Layers, ie creating thousands of Layers for all the work, new layer for each object I import.
But is there any option for easy extraction of objects into single layers, one click option or much easier than going individually through each of them?
If not available, this type of option would work for CorelDRAW or any vector program, be really more effective and stay in touch with the requirements of the industry, especially when it comes, on creating vectors for web or apps.
View 12 Replies
View Related
May 22, 2012
Having trouble moving objects between layers by simply dragging the right-hand dot to a new layer? CS6 won't let me drag the dot on any kind of selected art from any kind of file I've tried..
Click the name of the desired layer in the Layers panel. Then choose Object > Arrange > Send To Current Layer. Drag the selected-art indicator , located at the right of the layer in the Layers panel, to the layer you want. But method #2 doesn't work at all for me. In fact, the cursor doesn't even change when I mouse over the selected-art indicator dot.
View 23 Replies
View Related
Mar 29, 2013
I've encountered a strange issue in PSDs I've inherited from another designer.
When I have a text layer selected with the type tool active, the font size reads correctly (say, 40px). When I actually select the text with the type tool, the font size gives a strange number (say, 38.74px).
See the screenshots below:
This is on OSX 10.8.3, Photoshop CS6.
View 1 Replies
View Related
Nov 22, 2013
I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies
View Related
Jun 12, 2013
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies
View Related
Aug 6, 2013
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies
View Related
Sep 30, 2013
I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
View 3 Replies
View Related
Mar 20, 2013
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies
View Related
Sep 6, 2013
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
View 4 Replies
View Related
Aug 3, 2013
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies
View Related
Nov 11, 2012
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
View 2 Replies
View Related
May 9, 2013
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies
View Related
