Basically I have several maps which have had black lines drawn on them - I would like to separate the different 'sections' of each map based on the boundaries. I am able to select the black line with the magic wand tool - however this isn't proving much use .
Here is an image to further demonstrate what I'm trying to achieve:
I love Photoshop, but one thing that always annoyed me to death is that whatever part of the layer is not within the boundaries of the chosen document size not only does not show, but also does not get selected.
Many times I want to crop a layer to a specific area, so I select that area, then do a invert selection and delete, but if any part of that layer was outside the document printable area when I did that, that part of the layer will not get deleted.
So if later I move that layer I will see that hidden part of the layer come back inside the document. This is not the way it work in Illustrator, where you get to see everything outside the printable area, but you know that only what's inside will print.
Is there a way to avoid this behavior?
I am not able to move layers around on my layout once I have selected them. What could be wrong?
View 17 Replies View RelatedI find all the Layers are merged into one! I usually I make a dozen or so files before choosing the best one to go back and edit.
After starting up again today I realised that I needed to make a slight alteration on a previous poster and discovered that there was only a single layer contained within the PSD file with all the content merged together! I checked other files and they were all the same! This means I have at least 20 PSD files that are practically useless!
I cannot understand why Layers was not selected as default in the save as window!! I certainly never turned it off in the save as window and no one else uses my computer... Unless it had something to do with the fact that when I was saving PDF files of the same documents and unclicked the "preserve Photoshop illustrating capabilities" in the second window that pops up so the PDF would not be as big... but even so I did not click it in the save as window... and therefore assumed it would only apply to PDF files! If this is the reason then I'm bloody annoyed that they would implement such a stupid feature! What other use is there for PSDs then to preserve the layers!?
I have never had this problem before on other computers or copies of Photoshop... Unless this has something specifically to do with CS3?
I dont suppose there is any way to retrieve my lost layers so I can edit the files? Or do I just have to start all over again?
I'm trying to find a script that batch rename/renumber a group of selected layers. So far I've been able to find a script that renames every single layer in a Photoshop document (overkill). Or there's the CS6 Tab rename trick (too slow).
I routintely export PSDs from Illustrator for use in After Effects. But in Photoshop, I'll get a couple hundred layers named <path> or <path> + <path> or <group>. Renaming by hand is out of the question. But I don't want to rename every layer the same.
When I followed the step 2 from this tutorial:[URL] said Could not use the move tool because no layers are selected.
View 2 Replies View RelatedI'm making an animated GIF, and what I want to do is overlay each layer of the animation with a layer of text. I know the hard and long way by creating a copy of the text layer and merging it with each and every layer of the animation, but is any faster way of doing this?
View 4 Replies View Relatedhow to change the colour of the selected layer in the layers pallete? It's quite annoying the way it is (Dull grey/blue) and sometimes hard to see what layer's selected?
I prefer the brighter blue on my other computer!
I frequently encounter this problem across numerous versions of PS (CS4 - CS6)I like to CTRL+click on my layers to select them for convenience. If in the layers panel, I have a Layer Mask selected (that is, the white border highlight is around the alpha mask thumnail) and the mask is unlinked from the layer itself (there is not a link icon bewteen the layer thumb and alpha mask thumb), the CTRL+click feature seems to be disabled.
I have to relink the mask to the layer in order to restore the functionality. This occurs regardless of the order of any of the layers in question.Is this correct?
I have this file with multiple layers of text.
I want to print the file with these layers selected individually, so that if I have two text layers "Cow" and "Dog", I get two similar images with different text.
How would i automate this? It would take a lot of work to select each layer and save the files individually.
According to 'About Lightroom;
this is what I'm running:
<Lightroom 3.6, Camera Raw 6.6>
I used to 'merge to panorama', or 'open as layers' in Photoshop regularly, but today it no longer works. When I try, the message comes up: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.6 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
When I go to Photoshop Help Menu, 'no available updates at this time' is the message that comes up. I manually downloaded the Camera Raw 6.6, but to no avail.
When attempting to edit using PS, the program DOES open, but nothing happens... the files do not appear. They DO open individually when Edit in Photoshop CS4 is selected, but I prefer the 'open in layers' option, and often use the 'merge to panorama'...
If I right click on on the shape tool and try to select any of the choices nothing happens, the menu keeps showing. I also can't move any layers anymore using the move tool.
Seems like a focus issue perhaps? Latest Windows CS6 Photoshop updated to the latest version.
When I select a layer, it is highlighted in grey (in the layers palette) and I am unable to edit it. My current process for making a layer editable is as follows: Select layer (highlighted in grey)Double click layer (opens "Layer Styles" dialogue box)Close "Layer Styles" dialogue boxLayer is now highlighted in blue and can be edited. I am currently running Photoshop CS5.1 on a windows machine which is using Windows 7.
View 2 Replies View RelatedIs there a way to make PDFs of layers which are turned on in Illustrator, from Illustrator itself?
If there is, I'm not seeing it.
CS6, latest update
OS X 10.8.5
I have functions that will freeze or thaw layers in a viewport, but I was wondering how to just check which layers are thawed/visible in a selected viewport.
View 1 Replies View RelatedWorking with many layers 60+ is great, but most of the time we have many that are not selected i.e. visible.sometime 30+ those layers are most of the time not needed anymore or make it too crowd in the layer box, making layer selection and handling messy.
The best way is to remove them from the PDN, while keeping only the visible selected. But removing the "not selected" layers one by one is time consuming and again, accidents happen.
Three solutions .
A simple way to do it, is just add under "edit menu" or the "Layer menu" the following. "Create new PDN from selected visible layers"..
OR
add to the "Save As" the option to "Save selected visible layers only"
OR the long way, that has its good things in it too.
Add the option to INVERT the layers visibility selection, and then the option to remove/delete selected layers. (of coarse add an approval "are you sure box")
This option would even be great for other uses when we need to switch back and forth between many visible layers. for example when making animations etc.
I've been wondering, is there some trick to starting 2 Bezier lines at the same start- and end-points? Or do I have to eyeball it? Can I reactivate an old, previously selected line after something else has been selected? Is it possible to keep several lines selected in separate layers apart from each other?
View 1 Replies View RelatedI wanted to ask if by chance any of the scripting gurus here happen to have written an AI script that will take a number of selected sublayers/sub-sublayers and move them so they become top-level layers?
I am really needing this very badly, given that After Effects can only handle AI layers as separate entities. So I find myself moving tens, even hundreds of nested sublayers to the top level all the time.
Is it possible this script exists already?
I am using this script to find and replace words in layers. (The script only targets particualr words, rather than the whole layer name).
I would like to make it so it targets selected layers only.
I have found this script which loops through selected layers only, but I am not sure how to add the find and replace layer name functioality.
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies View RelatedI have finished my works using only one layer( a bad habit I know) and now I need to export them as PSD, and as You know it needs Layers so it can be editable on Photoshop.
I know the fact that I should import all the objects in single Layers, ie creating thousands of Layers for all the work, new layer for each object I import.
But is there any option for easy extraction of objects into single layers, one click option or much easier than going individually through each of them?
If not available, this type of option would work for CorelDRAW or any vector program, be really more effective and stay in touch with the requirements of the industry, especially when it comes, on creating vectors for web or apps.
Having trouble moving objects between layers by simply dragging the right-hand dot to a new layer? CS6 won't let me drag the dot on any kind of selected art from any kind of file I've tried..
Click the name of the desired layer in the Layers panel. Then choose Object > Arrange > Send To Current Layer. Drag the selected-art indicator , located at the right of the layer in the Layers panel, to the layer you want. But method #2 doesn't work at all for me. In fact, the cursor doesn't even change when I mouse over the selected-art indicator dot.
When cloning a selected area, only the area inside the boundaries are cloned.
How do I reverse the process,
how do I keep the sampled area inside a selected area.
I have two images open in photoshop CS4. I've selected one image, clicked the "move" tool and moved it onto the other image. I need to see the boundary box so that I can resize it, or rotate it (as in CS3). I've gone into view>show
View 2 Replies View RelatedI've encountered a strange issue in PSDs I've inherited from another designer.
When I have a text layer selected with the type tool active, the font size reads correctly (say, 40px). When I actually select the text with the type tool, the font size gives a strange number (say, 38.74px).
See the screenshots below:
This is on OSX 10.8.3, Photoshop CS6.
How do I set my brushes / tools .. to show brush size circle boundaries just like every other version of PSE?? all i get is a picture of the icon and no circle boundry. Have not control over my brush.
View 2 Replies View RelatedI'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedAt the 3200% zoom level, with small movements of the cursor, I get different color readings within the boundaries of a single pixel.
View 10 Replies View RelatedI've successfully merged a sequence of photos taken along the shoreline of Yellowstone Lake using the Photoshop Elements 11 Photomerge Panorama facility. Alignment is perfect but the sky has gone wrong at one or two boundaries.
The sky is there in both the adjoining photos and I'm sure I could do a better job than Elements if I could adjust the mask boundaries and get rid of the existing smudged area, but I can't find out how to do that.
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies View RelatedAny way to create a page from a selected object? For example, if I select a rectangle that forms the background of my image, can I create a page of the same size and in the same location? I used to use Inkscape, and it was very simple to do that.
I had to change my paper size and now my drawing does not align with the page. The drawing is very complex and I would rather not have to move it. Any easy way to realign the page.