I have two images open in photoshop CS4. I've selected one image, clicked the "move" tool and moved it onto the other image. I need to see the boundary box so that I can resize it, or rotate it (as in CS3). I've gone into view>show
View 2 Replies
I love Photoshop, but one thing that always annoyed me to death is that whatever part of the layer is not within the boundaries of the chosen document size not only does not show, but also does not get selected.
Many times I want to crop a layer to a specific area, so I select that area, then do a invert selection and delete, but if any part of that layer was outside the document printable area when I did that, that part of the layer will not get deleted.
So if later I move that layer I will see that hidden part of the layer come back inside the document. This is not the way it work in Illustrator, where you get to see everything outside the printable area, but you know that only what's inside will print.
Is there a way to avoid this behavior?
I want that a section parallel and through a threaded hole will show the double lines of the thread.
Now only a hole is shown
When cloning a selected area, only the area inside the boundaries are cloned.
How do I reverse the process,
how do I keep the sampled area inside a selected area.
Basically I have several maps which have had black lines drawn on them - I would like to separate the different 'sections' of each map based on the boundaries. I am able to select the black line with the magic wand tool - however this isn't proving much use .
Here is an image to further demonstrate what I'm trying to achieve:
How do I set my brushes / tools .. to show brush size circle boundaries just like every other version of PSE?? all i get is a picture of the icon and no circle boundry. Have not control over my brush.
View 2 Replies View RelatedAt the 3200% zoom level, with small movements of the cursor, I get different color readings within the boundaries of a single pixel.
View 10 Replies View RelatedI've successfully merged a sequence of photos taken along the shoreline of Yellowstone Lake using the Photoshop Elements 11 Photomerge Panorama facility. Alignment is perfect but the sky has gone wrong at one or two boundaries.
The sky is there in both the adjoining photos and I'm sure I could do a better job than Elements if I could adjust the mask boundaries and get rid of the existing smudged area, but I can't find out how to do that.
Any way to create a page from a selected object? For example, if I select a rectangle that forms the background of my image, can I create a page of the same size and in the same location? I used to use Inkscape, and it was very simple to do that.
I had to change my paper size and now my drawing does not align with the page. The drawing is very complex and I would rather not have to move it. Any easy way to realign the page.
I have a surface with several boundaries inside its extents representing areas where I do not want contours to be visible. Inside some of the boundaries (type = "HIDE") the contours do not show up, but in others, some segments of the contour lines are visible and others are not. How do I get all of the contour segments to be not visible within the boundaries?
View 2 Replies View RelatedI've tried redrawing the shape (which is all I could think of at this point), and I still can't get a hatch in the negative space of this extrusion.
View 9 Replies View RelatedPasted into multiple smaller surfaces; made smaller by adding outer boundaries.The smaller surfaces are adjusted by using the Raise/Lower edit.Make a new surface. Paste all the small surfaces in together.
Now, I notice an area that was not included in any of the small surfaces, but was part of the original large surface. Somehow, this area is showing up in my final surface. So far I tried adding the polyline that forms the 'outer' boundary of each small surface also as a 'data clip' boundary, but don't see any difference. Only thing that works is delete surface point...click, click, click.
I am having trouble hatching multiple "Arc & line" boundary objects. If there is ony 1 shape mape up of Arcs & Lines it works ok, but if there is more than one, it fails,
TVLn(0) = New TypedValue(0, "line")
Dim FilterLn As New SelectionFilter(TVLn)
' Selection Filter: Arcs
Dim TVArc(0) As TypedValue
TVArc(0) = New TypedValue(0, "Arc")
Dim FilterArc As New SelectionFilter(TVArc)
[code]...
I need to remove Hatch boundarys. I have tried Hatch Edit - Remove boundarys. Then AutoCad wants me to select Select object or..
I cant seem to select anything in this option?
I'm making other routine and I want to check if there is some boundaries in the selected surface and in that case, which of them has the most priority.
contorno= "boundary" and exterior=SurfaceBoundaryType.Outer
I have done this: URL....
I think that the last boundary in the list is the first boundary priority.How can I get that list?
is it possible, when you insert a pdf into a drawing for not plotting the boundaries of this pdf?
View 7 Replies View Related is there a way to extend the hatch if the region is later extended? bd.png
the yellow highlights show the regions that are “empty” in hatch after the boundary has been changed. My current approach is to first delete the hatch, then re-apply it, but it can be very inconvenient if there are multiple regions to change.
Is there a way to automatically associate the existing hatch with new boundary (either extended or shrunk)?
I loaded up GIMP today to find that the yellow dashed layer boundaries aren't showing within any of my drawings. The 'Show Layer Boundary' option in the 'View' menu is selected - I have even tried un-selecting, and re-selecting it again, but still does not show.
I really don't want to reinstall GIMP because I will lose my custom window configurations.
I know that I´m supposed to make one drawing for each level when I draw several story buildings, but this time for some reason I just did one drawing for the whole building, and then I xref the different sections into it. Problem is that in plan view when I want to view plan 2 I get the windows and doors etc from plan 1.
No problems, I thought, I´ll just create a clipping boundary so that everything beneath plan 2 will be hidden, and it works really well when in 3d view, but as soon as I press the "top" button, the whole xref suddenly disappear!
Here are some pictures:
[URL]...... - looks exactly as I want
[URL].......- Where did it go?
If I use the Select tool in fixed size mode, I have trouble lining the selection box inside the image boundaries. When I try to copy the selection into a new image, I'm frequently off by a few pixels. e.g. :
Is their a way to make it easy to snap the selection box to the image boundaries?
[URL].......
Found this code at //blog.civil3dreminders.com/2011/0 ... aries. html to extract all surface boundaries - something I do a lot. How can I take this code and use it in C3D 2012
Extract All Surface Boundaries
Ever want to extract a bunch of surface boundaries? I have, but I don't really want to select each and every surface. Here is some code for VBA that will automate the process.
Sub ExtractBoundaries()
Dim oAcadObject As AcadObject
For Each oAcadObject In ThisDrawing.ModelSpace
If (TypeOf oAcadObject Is AeccTinSurface) Then
Dim oSurf As AeccTinSurface
Set oSurf = oAcadObject
oSurf.ExtractBorder aeccDisplayOrientationPlan
End If
Next
End Sub
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm working in Adobe CC Illustrator on a MacBook Pro.When I click on an obect or text it is bounded by yellow. The background of my page is white. Yellow on white is irritating and hard to differentiate. I tried modifying my preferences, but nothing changes.
Change that highlight color to blue, red, purple.... anything but yellow? I need to delete preferences?
I am trying to create islands of surface by multiple enclosed polylines as boundaries.
Each enclosed polyline has several 3d lines as drawing objects.
After creating the surface from the 3d lines I use "Select similar" to select all boundaries(enclose polylines) and add them as boundaries using the "Show" option.
However, it is not working and I do not see the islands of a surface.
I used to have a tool (not sure where I got it from) that would extract all surface boundaries that were in a drawing but this tool no longer works in 2014 as it was written for 2012. Time/inclination to write a similar routine that would work in 2014?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have an assembly that uses reference parts. I do not want them in the BOM, but they are used in other drawings in the BOM. When I make them reference, the iso drawing view boundaries are not correct. Can I change the size? Crop will only decrease the size not increase?
View 3 Replies View RelatedI got this problem during creation of corridor surface boundaries. I would like to create a corridor datum surface using the daylight feature lines, automatically from the corridor surfaces-boundaries dialog box, but the daylight does not appear in the list.
View 5 Replies View RelatedI have several surfaces pasted to make a composite surface, and a poly line is added as a none destructive boundary.
The surface looks fine on the screen, but when it is exported to LandXML the boundary is ignored, This creates a 120MB XML file, which will not load into Windes for Drainage work.
I can trim the breaklines defining each surfaces, but there is 8 models and 8 different areas to trim in this manor. This would take far too long and would also create 64 surfaces!!!
There is a default viewport in Layout1. How can I reposition and resize it on the paper? It would also be sufficient if I could delete it--how do I do that? (then I could create one that fit my needs)
Briefly, what are disadvantages of not using Model view?
In addition to my continual problems with getting the color output to match simulated print colors of CMYK on screen and .png printouts, I now find that upon PDF export, you can see the boundaries of an ellipse and a shape. I wanted to create a corona-style effect around the sun, so I used an ellipse and a shape, both with transparencies applied. (Edit to add: this is a design for a card deck.)
When I print the PDF export, (see the "PDF boundaries" image), the colors look way off and you can clearly see the circular boundaries of the ellipse and/or shape; it will do it on either one. All that should be visible is the white "corona" around the sun, which is subtle and indicated by the blue arrow pointing to it on the image "Sunrays."
Having discovered this problem, I've experimented with all sorts of variations of trying to get that corona, including the "glow" effect, but don't know how to change the color of the glow, itself. But it shouldn't be printing those boundaries to begin with, so something is off somewhere.
I'm exporting with PDF/X-3, 300 dpi, Limit bitmap resolution to rasterization resolution, JPEG quality at 100, exclude invisible layers.
Having some very strange issues with area boundaries used in groups.
I have tested it in RAC 2011, 2012 and 2013 and they all seem to be doing similar things.
grouping them and pasting them is fine - even between levels and even schemes. when i edit them items are excluded on sketch close and even disappear from one scheme to only appear in the scheme that i edited them in. the area still remains in both but only boundaries in one scheme.
When I was using AutoCad 2010 I could HATCH within a cube, circle or within any object that was joined together even if it had text in it would HATCH within the boundaries of the area to be hatched. Now that I use AutoCad 2013 this option does not work as if there is text in the object only a partial area will become hatched. This means I have to MOVE the cube or whatever shape to a place where there is no text inside it, HATCH and then move it back to where I wanted it in the first place.
View 1 Replies View Related
