Any way to create a page from a selected object? For example, if I select a rectangle that forms the background of my image, can I create a page of the same size and in the same location? I used to use Inkscape, and it was very simple to do that.
I had to change my paper size and now my drawing does not align with the page. The drawing is very complex and I would rather not have to move it. Any easy way to realign the page.
Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
I love Photoshop, but one thing that always annoyed me to death is that whatever part of the layer is not within the boundaries of the chosen document size not only does not show, but also does not get selected.
Many times I want to crop a layer to a specific area, so I select that area, then do a invert selection and delete, but if any part of that layer was outside the document printable area when I did that, that part of the layer will not get deleted.
So if later I move that layer I will see that hidden part of the layer come back inside the document. This is not the way it work in Illustrator, where you get to see everything outside the printable area, but you know that only what's inside will print.
Is there a way to avoid this behavior?
pageCenter.cdr
I have a headache with this (attached) file. When I tried to re-position this group of objects to center of page it's selection becomes bigger!
CorelDRAW X6
The default page size in X6 has become 9 x 11 and when you try to change it to 8.5" x 11" it defaults back to 9 x 11. Same with objects. It does not show true sizes, never shows .25 or half sizes. I have looked through settings and how to get true measurements in my display at the top of the page, so when I import an object it does not give actual ruler sizes.
View 4 Replies View RelatedI have a drawing of an object and I want to fit it to the page, I can magnify it or minimize it using the mouse but this not the issue, it seems fine on the page like 1, when I go to "Arrange >> Clear transformations" it looks bigger like 2, but thats the original size, how can I change it to smaller (or bigger)?
View 14 Replies View RelatedFriends, In some documents (not all) if I place some objects outside page area (desktop) it disappear for other pages. I have to use copy paste (very slow and time wasting process)
check following images for better understanding of the problem:-
Page#01 : [URL]
Page#02 : [URL]
I am using: CorelDraw X4 fully updated (all patches installed).
I am trying to center objects in the page but for some reason the Object Position is not working. I am doing a 24x36 poster and when I type 12 in to center the object it is not working.
View 2 Replies View RelatedI am having a horrible time getting the page size to not be a whole number - not 8.5x11. It will not change even going into all the options in set up. Object sizing is doing the same thing. Somehow I have also lost the letter size in the page options - comes up custom. The set up shows that it is 8.5x11, but cannot adjust when a page is open. Things just keep changing in my Corel that I haven't changed.
View 8 Replies View RelatedI am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
I am creating an object that has four text boxes in an object that is about 2" x 4". When I do the merge, I end up with multiple pages, all 2" x 4". How can I now move those pages spaced about a larger page, say 11" x 17" so I can have positioned and print multiple 2" x 4" objects on the larger sheet?
View 2 Replies View RelatedIs it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
View 4 Replies View RelatedGIMP script/plugin for detection of object boundaries in a raster image and automatic creation of corresponding paths?
View 2 Replies View RelatedDoes Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedI quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
Is it a bug or what? Why can't I centre an object to the page in DP6? It's always off by about 5 pixels. I have to manually adjust it every time.
View 7 Replies View RelatedWhen I open draw X5 and a new page, I put an object on that page but it does not tell me where that object is on the page. When I put in a X and Y dimention it will move that much and resets back to zero. Is there a setting some where that I have to change? In X3 it whould tell me where the object is.
View 13 Replies View RelatedIs there a way to align text or an object on a page? I have done this using the guides, but there has to be an easier way! I'm looking for vertical and horizontal alignment.
View 1 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedThere is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
It involves right clicking on an object in Corel Draw X6. I had this same issue in X5 too.
My issue is that if I select an object and then right click on that object (I right click on the "X" in the middle of the selected object) it will select the object below the "X." In other words, I can only ever get the right click menu to appear on the object I select if there are no objects below it.
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View Relatedhow you can trim an object to the shape of the object on top?
View 9 Replies View RelatedI checked out the macro for the consecutive numbers by using the print merge option. I found out that using the print merge and merging it to a new document does exactly what I needed to do to be as efficient as possible, except if i need to number 120 labels, it opens up 120 pages on the document. How to merge the pages to have 1 page with all 120 labels. I know there is a way to put as many labels as possible on a page when using a regular printer, but I'm printing on viynil and theres a cut contour I need
View 8 Replies View RelatedI am attempting to publish a pdf of a booklet I've been working on. It is currently set up with facing pages.
I want to publish it as a pdf, but so that it maintains the booklet format. That is, when it opens as a pdf, one should see both left and right hand pages, as one would browsing through a regular book.
How does one do this with Corel? I know once one has published, one can open the pdf and change the view setting to 'two page display.' I want this to happen automatically when the viewer opens the document though.