I am having a horrible time getting the page size to not be a whole number - not 8.5x11. It will not change even going into all the options in set up. Object sizing is doing the same thing. Somehow I have also lost the letter size in the page options - comes up custom. The set up shows that it is 8.5x11, but cannot adjust when a page is open. Things just keep changing in my Corel that I haven't changed.
View 8 Replies
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Is it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
View 4 Replies View RelatedIs there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
After installing the latest patch, I read that ... "You can press Enter to apply transformations from the Transformations docker".
Here's my issue...when I draw a box as shown, I try to do a "PROPORTIONAL" size change by using the 'enter' key. No luck. I then try to do a 'non-proportional scale', it works fine.
When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
I recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
When I enlarge a drawing or draw a large drawing to size, when I go to shrink it down to an exportable size on the page all the porportions of outlines and shades are all out of whack. What can I do to maintain the drawing to scale with all intact for different sizing of jobs, So I don't have to go in an correct the aspect of the drawing for each and every job.
Also if I export a drawing as a jpg and email it, On the droid phones it does not recognize the jpg file and it won't open.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
in coreldraw usually on small files having 7 to 8 pages i move pages by dragging its tab on the desired location. but how do i handle large files for eg moving page 49 before 15? the tabs list gets pretty long.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies View RelatedI would like to export a page I am creating as a jpg. Right now, I have one object on the page, and its a .jpg object. When I export from the File menu, only the jpg is exported. How can I export the entire page? If I add text to the object (which will be a banner). it only exports the jpg, and and the exact space required by the text, not the entire page. I have been unable to find setting for exporting selected objects or entire page. I have another less powerful drawing program that gives options to export object, selection, or page.
If I create a box, and place it on the document, the whole thing will export, but if the pox is larger than the page, then entire box is still exported, where I only want the page dimensions exported so I can eventually arrange objects ont he box that will overlap the page dimesnsions, but only the page area should be exported as a jpg.
Should I be doing this as a powerclip? I haven't used that feature yet in CD. Then export the powerclip object?
How come the length of a page name is limited to 31 characters? Any chance this limit can be enlarged in a service pack?
View 6 Replies View RelatedI wanted to know if there is a way to convert my pdf to two page spread pngs as it is laid out? So far I can only convert it to individual pngs.
View 14 Replies View RelatedWe just started using X6 here at work, we were using X3. In X3 I never had a problem with page dimensions, with X6 anytime I go 200" or more in either dimension I get blank PDFs. 199" by 199" works just fine.
View 3 Replies View Relatedi have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
I am designing a book of walks. I want to create a master map cover a large area and extract regions of this onto separate pages. The individual pages will then have additions graphics and text added and edits to the map data may be required.
What is the bast way of copying a region of a document to another.
I am an experienced VBA programmer and could develop utilities to support this process.
I just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies View RelatedIf I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
Previously I could choose a large paper size on my printer select fit to page and the document would scale up to printer out on paper large than than the design page. When I try this with X6 the image disappears. Is this a known bug?
View 4 Replies View RelatedI work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies View RelatedI use the default page very unusal way by keeping the width & height with max. page size. I need your favour as if i want to A4 page border i am going back again and choose a4 page and double click on the rectangle to achieve it and again i choose by max. page.
create a a4 page border, or any preferred size for executing them using shortcut while keeping my max. page size.
I am currently preparing a brochure and need to have one page (of six) in DIN A3 instead of A4 like the others. But I find no possibility to change just the page I need into A3.
View 2 Replies View RelatedHow to put a lined page border around my page. In MS WORD it is very straight forward but I must be missing the obvious here though my 15 year old daughter can't work it out either which makes her old dad feel a little bit better about it.
View 4 Replies View RelatedI have a document of 34 pages with page numbering. how can i curve all page numbers? if i curve one page number say 25, all pages get numbered as 25.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
When I open a new file, my default is an 8.5" x 11" page. When I resize it for an order, the view is staying at the 100% view, yet the same operation in version 11 gives me a view as if I had entered the standard CTRL + F4.
View 5 Replies View RelatedI cant set a hyperlink to any page higher than 10.If I click on "more" a box opens that you could presumably edit to page 11 or higher,but the mouse wont allow the writing of text.Has Corel 13 10 pages as maximum or something?
View 1 Replies View RelatedHow do I get a particular layer to appear at the back of the page in draw X5?
I need to convert text to curves but when I make the non text layer visible after doing so it pops to the front.
coreldraw graphics suite X5 just installed on Windows 7 background and page are yellow how can i remove this?
View 3 Replies View RelatedAll editing I make on a page changes all the pages.
I must have changed a setting unknowingly.
