AutoCAD .NET :: Can't Hatch Multiple Arc And Line Boundaries
Apr 20, 2011
I am having trouble hatching multiple "Arc & line" boundary objects. If there is ony 1 shape mape up of Arcs & Lines it works ok, but if there is more than one, it fails,
TVLn(0) = New TypedValue(0, "line")
Dim FilterLn As New SelectionFilter(TVLn)
' Selection Filter: Arcs
Dim TVArc(0) As TypedValue
TVArc(0) = New TypedValue(0, "Arc")
Dim FilterArc As New SelectionFilter(TVArc)
[code]...
View 4 Replies
ADVERTISEMENT
Nov 18, 2010
I have a lot hatches with no boundary around. i need recreate boundaries of these hatches but it take too late time doing it. i am an intermediate in autocad.
View 8 Replies
View Related
Apr 20, 2011
I've tried redrawing the shape (which is all I could think of at this point), and I still can't get a hatch in the negative space of this extrusion.
View 9 Replies
View Related
Apr 18, 2013
I need to remove Hatch boundarys. I have tried Hatch Edit - Remove boundarys. Then AutoCad wants me to select Select object or..
I cant seem to select anything in this option?
View 4 Replies
View Related
Aug 18, 2011
is there a way to extend the hatch if the region is later extended? bd.png
the yellow highlights show the regions that are “empty” in hatch after the boundary has been changed. My current approach is to first delete the hatch, then re-apply it, but it can be very inconvenient if there are multiple regions to change.
Is there a way to automatically associate the existing hatch with new boundary (either extended or shrunk)?
View 3 Replies
View Related
Aug 30, 2012
When I was using AutoCad 2010 I could HATCH within a cube, circle or within any object that was joined together even if it had text in it would HATCH within the boundaries of the area to be hatched. Now that I use AutoCad 2013 this option does not work as if there is text in the object only a partial area will become hatched. This means I have to MOVE the cube or whatever shape to a place where there is no text inside it, HATCH and then move it back to where I wanted it in the first place.
View 1 Replies
View Related
Feb 28, 2013
I am in the process of translating existing VBA code into its equivalent in VB.NET (developing VS Professional 2010 and testing in AutoCAD 2010)
My problem is that I have never done hatching in VB.NET before, and now I am required to hatch a rectangular area (defined by lines) within an AutoCAD block. How to go about accomplishing this task.
To create my block, I am using a DBObjectCollection to store my lines, and then append them to the block definition, creating a reference to see what I just created.
If I were to define a rectangular outline within this block, how can I possibly hatch it?
View 3 Replies
View Related
Jan 17, 2013
My application has suddenly started to link the hatch pattern to the area boundaries.
The objects remain on their own layers, but I am not able to delete the hatch pattern without deleting the boundaries.
I cannot edit the hatch pattern either as the application no longer recognises the hatch pattern.
Have i changed a setting unwittingly?
View 2 Replies
View Related
Dec 18, 2013
I am trying to create islands of surface by multiple enclosed polylines as boundaries.
Each enclosed polyline has several 3d lines as drawing objects.
After creating the surface from the 3d lines I use "Select similar" to select all boundaries(enclose polylines) and add them as boundaries using the "Show" option.
However, it is not working and I do not see the islands of a surface.
View 2 Replies
View Related
Jul 3, 2012
I like that in the hatch command, you can select multiple boundaries at a single time, hit ok, and be done with your hatching. However, when hatching from the tool palette, you can only select one boundary at a time, forcing you to constantly repeat the command. Is there a system variable that controls this type of behavior for the tool palette?
View 5 Replies
View Related
Jan 27, 2011
I want to create a space style similar to BOMA with editable boundaries to use for LEED Daylighting calculations. I figured out how to make a new property set definitions, new space style, etc., but I can't get the boundaries to read as the LEED boundaries. I want the Base area to remain as is, but I want NET to be Daylit, Useable to be Sidelit, and Gross to be Toplit.
I could do the workaround and just use the OOTB BOMA style, but then others editing will have to constantly translate which means what as we edit the drawings. When you look at the display display Properties for the space style, the boundaries and hatches read as net, useable, etc. I can't figure out where to redefine those and when you right click the space and Edit Boundary, I need to be able to display the correct properties, not the BOMA properties.
View 1 Replies
View Related
Feb 9, 2011
sometimes i copy the hatch from one drawing and paste it in order to compare. i noticed that the snap cant see hatch, meaning that i have to outline the hatch. is there automate way to outline hatch with a line?
View 4 Replies
View Related
Apr 24, 2013
Trying to remove multiple hatch grips. Since 2011 brought in the pop-up option, single grips can be removed with this method. But when I want to delete a larger number of grips at once, I can't achieve the required result. Process is as follows:
1. Select Hatch itself
2. Holding SHIFT, select multiple grips (which turn from blue to red)
3. Then 1 left click on a grip, and scrolling through the options using CTRL key until I arrive at 'REMOVE'. Then another left click and nothing happens!
View 1 Replies
View Related
Jan 30, 2013
Is there a way to control weight of line for hatch?
I'm trying to make some style for number of areas and when I do hatch on a paper it's almost invisible because it's weight!
Tons of hatch patterns and they all useless!?
View 3 Replies
View Related
Sep 12, 2011
I have existing drawings that I copy and manipulate into new ones. I have a drawing of a conveyor line that has some segments "highlighted" with a yellow hatch that appears to follow a single line. The conveyor layout has been changed. So I need to update the drawing for the new layout. I'm wondering how this was drawn. I cannot explode the hatch to copy parts of it. I'm thinking there was probably a simple way to get the hatch to follow the drawn line. Putting boundaries around the drawn line to hatch in would be rather time consuming. Is there a simple function I don't know about?
View 6 Replies
View Related
Apr 9, 2013
Basicaly I have a plan of a part of a city and I want to fill the houses with a solid hatch, I was wondering if I could do them all at once instead of picking an internal point one by one (there are a lot of them!).
View 4 Replies
View Related
Dec 4, 2007
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
Inv 2008 sp1
View 9 Replies
View Related
Oct 12, 2012
i create multible blocks (min. 100 blocks in diffrent name) with Diffrent hatches in that block....
i want to change the scale in all diffrent hatches.. in all block...
i want any lisp....
View 4 Replies
View Related
Jul 5, 2012
I draw electrical wiring diagrams and are used to working with Micrografx Designer 9.0. I have now got a new computer and wanted to upgrade to Corel Designer.
Since i draw wiring diagrams i often have to draw wires with two colors. In MD9.0 you could draw a simple line and the use hatch filling to add two different colors to the line and still be able to move the points on the line around. (in my case for routing of the wires and the components) I can not figure out how to solve this in Corel Designer. Am I missing something or is this function removed?
View 10 Replies
View Related
Dec 5, 2013
How to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
View 2 Replies
View Related
Jan 17, 2012
I have curved underbelly of a massive stair. In order to draw the the detail, I would like to pick this curved line of the underbelly to make a hatch but unable to. Is there a way around this or is this just something I have to work around?
View 1 Replies
View Related
May 2, 2013
I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
View 1 Replies
View Related
Aug 24, 2011
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
View 9 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Jan 2, 2013
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies
View Related
Feb 22, 2013
I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
View 1 Replies
View Related
Dec 17, 2011
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
View 6 Replies
View Related
May 6, 2013
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies
View Related
Feb 12, 2013
except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
View 2 Replies
View Related
Jun 7, 2011
Any good script that allows you to align multiple objects to a line? I've found the ALIGNIT.lsp, but it's not working in Autocad 2012.
It's like this:
I have a horizontal line. Above it, there are +200 objects. They are aligned in the right rotation already, but I just want to move all the objects lower line to my horizontal line.
View 6 Replies
View Related
