Photoshop :: How To Turn Off Transparency View When Resizing Brush On CC
Nov 22, 2013
So, when Adobe introduced the "brush preview" when using the Control+Option drag to change the brush size/hardness (not sure if it's called this way), I was ecstatic! It made my workflow much faster without having to go to the menu to change the brush size or to the bracket keys. Now on CS6 they added a feature that basically broke that for me. Now it not only shows the size/hardness, but it also shows the transparency. It sounds like a great idea, and it is when you work with bigger opacities, but I work a lot with opacities below 10% and it basically becomes invisible, so it's hard to know if I'm using a hard/soft brush when adjusting the brush size. Is there a way to turn just the transparency preview off?!
View 6 Replies
ADVERTISEMENT
Jan 28, 2014
I am creating pages where I add elements and they are all resizing to clip to the page size. Very annoying. Can this be turned off?
View 6 Replies
View Related
Aug 29, 2012
Using Photoshop CS6, is there any way to make the up and down motion of control+option+pen ALSO control brush size? I keep making erroneous minute up/down changes to hardness or opacity while resizing left and right.
View 5 Replies
View Related
Aug 17, 2012
I am using the following code to upload and resize graphic files.
PHP Code:
View 2 Replies
View Related
Jun 17, 2012
I have a brush which is rectangular frame, i want to apply it to a square image.The only method i can see to resize the brush just constrains it and makes it a smaller rectangle...
Any way of resizing the height and width separately?
View 3 Replies
View Related
Dec 3, 2012
I very recently installed CS6. I have used Photoshop for years (CS5, CS3, CS, ...).
Now under CS6 I find that periodically the [ and ] keys will not resize the brush. I have to restart Photoshop to get them to work again.
View 1 Replies
View Related
Jul 16, 2013
I have a 3D view that for the life of me I can not turn off the transparency in, like wise I have several Interior elevations with this same problem.
Nothing is overwrote as being transparent in view/ VG/ Model.
Use Hardware Acceleration (Direct3D) is not selected.
View 4 Replies
View Related
Jul 9, 2013
When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
View 5 Replies
View Related
Oct 18, 2011
shortcut that i can not use since two days. To redim the brush size it is possible to use the shortcut ALT + right click. This is very useful when doing painting or drawing on Photoshop. The problem is that i no longer have the possibility to use this shortcut, and i do not know why. My keyboard is correctly set up and i even reset Photoshop, but still nothing.
View 9 Replies
View Related
May 18, 2012
I just tried the pdf export of a multipage document. When I open it in Reader or Acrobat I see a grid where the page is not covered (transparency grid?). It has nothing to do with the Reader feature - the grid is in the pdf (I can see it with Pitstop in wireframe mode). Can't find where to turn it off.
View 16 Replies
View Related
Jul 12, 2012
how to turn off transparency display of the xrefs? When i xref drawing A into drawing B, drawing A displays transparency. That autocad default and I want to turn it off.
View 1 Replies
View Related
Mar 11, 2013
Difficult to explain this in the title hense I haven't found an answer with a google search.
What it is, is that I have an image (a stud of an earring) that needs to be repeativly added to each image by hand at the moment I leave the image of the stud open and cut and paste it.
There must be an easier way to do this?
I was thinking I could turn it into a brush? I found the clone pattern but in the way I am using it, it doesn't work as I can't see is what my brush is to get it to line up.
View 12 Replies
View Related
Mar 23, 2007
I am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies
View Related
Apr 8, 2013
Is there a way to turn off cross-hairs for Photoshop when using a very fine brush? i recently bought Wacom Cintiq 12WX and find cross hairs under the pen incredibly jarring.
i selected "normal brush tip" option in preferences > cursors menu and it works fine with bigger brushes but currently i'm working on a small-format illustration and use 1 and 2 px brushes a lot and cross hairs are still present for brushes that small.
Photoshop CS6
Wacom Cintiq 12WX
Windows 7
View 1 Replies
View Related
Mar 28, 2013
I'm on a mac CS6, The control option to resize a brush on the fly, is there a way to turn off the coordinates displayed, and the red ruby overlay?
View 2 Replies
View Related
Jul 23, 2012
I have a set of four images I am referencing into a drawing through the data connect feature found in Planning and analysis that overlap. I am running Civil 3D 2013. I would like to be able to clip the images as well as turn off the transparency but I can't seem to figure out how. If you select the images cadd thinks it is an image referenced outside of Data connect, but the clipping tool doesn't work, and it doesn't even matter if you de-select print transparency in the page setup, it still prints transparent. Is there another set of commands or tools that I am not aware of that allows you to edit an image brought in through the data connect?
View 2 Replies
View Related
Sep 4, 2013
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
View 34 Replies
View Related
Sep 13, 2012
How do I turn my "define brush" option back on?
For some reason it turned off and erased all my previous watermarks tha I had made for my photos.
I need this option back in order for me to continue my work.
View 1 Replies
View Related
May 16, 2012
Is there a way to permanently turn on "view layer edges" in CS6? How about a way to bring back the arrange icon that was in the menu bar in CS5?
View 3 Replies
View Related
Jul 30, 2012
If this is possible to have a transparency brush in doing fades on curves. the brush would enable to lighten spot colors when brushed over the curve or curves. you could make a whole graphic fade out around the edges just by brushing over the edges.
You could have the capabilities to adjust the amount of the fade on a tool bar. maybe this is out there, but it would save a lot of time when doing graphics for t shirts and you want to fade the edges of the image on the shirt. you rip program would define the half tones by the transparency fade.
View 3 Replies
View Related
Sep 2, 2013
how i turn on brush pressure without tablet ot tech screen? this is my problem:
"pressure" is disabled. how i turn on pressure without tablet?
View 18 Replies
View Related
Jul 12, 2012
How do i turn brush strokes into a solid object, and retain the tapering effects? Im using CS3 on Mac OSX
View 1 Replies
View Related
Aug 22, 2013
I'm trying to put some black hair brush strokes against a head and they will NOT turn black no matter what I do. I have checked the color tab to make sure it's set in RBG.
View 11 Replies
View Related
Jun 12, 2012
I was practicing using the Elements 10 Spot Healing Brush, and it was working fine. I closed out of Photoshop so I could go view some more tutorials. When I opened it again, I was unable to see the physical size of my brush..in Spot Healing or in Clone. It registered as a number in the upper bar, but I could not see the brush size as before. I had been using the brackets to raise and lower the size before I lost the ability to view the physical size.
View 2 Replies
View Related
Nov 5, 2013
When I edit a part directly in an assembly, clicking on 'edit sketch' (frequently) changes the view from the one I had set while looking at the assembly. Is ther any way to turn this OFF?
View 1 Replies
View Related
Mar 19, 2012
Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies
View Related
Nov 13, 2013
I create MFC enclosures with various gasses. These enclosures can be quite large with three or more gas types. I create view representations with gas name and color the flow path for each gas in the named view. Is there a way to turn on all the colored overrides in one view to see all the various colors at once? I thought MASTER would show all colors but it does not. If not the only way would be to create the view of all gasses on and re-do all the work from all the prevous views.
View 2 Replies
View Related
Jan 10, 2014
I have updated my RFA library to RY2013 (from RY2011, RY2008 before).
Inside Revit (full, Bulilding Design Suite), the preview pane of the "edit type" window shows for the updated component families the sun path circle centered in a position which is far from the insertion point of the component, always got as intersection of 3 strong reference planes with "define origin" checked. Because of this, the preview of the component is not immediately available and several zoom in operations are needed to give a look to the component. This is the case for 3D views and plan views.
The sun path cannot be turned off and also the origin of the sun path cannot be moved inside the family file.
Any solution for the single component family?
Is there a way to batch turn off the sun path circle in every view of each family of the library and also to move the origin of the sun path circle to the insertion point of the family?
View 1 Replies
View Related
Mar 2, 2012
How do I turn on/off wall elements in my plan view? I'd like just the core structure to show for dimensioning purposes and turn off the sheathing etc.
View 6 Replies
View Related
May 29, 2013
How can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.
View 9 Replies
View Related
Jun 13, 2011
I recently upgraded from 2007 to 2012 and the entire look and feel of the program is different. Like Microsoft, AutoCad has "upgraded" everything so overnight i have managed to go from marginally competent to totally inept!
I really really would like to know if it is possible to switch back to the classic view with the old tool bars and commands.
View 9 Replies
View Related
