I have problem getting that smooth effect especially in the center of the piecehow to achieve this with a brush, i tried with lower opacity, flow, brush settings, the effect is kind of liquify, like the guy used smudge kind of, but not really[URLs]...
View 9 RepliesWhen I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies View RelatedFilter > Distort > Displace is undervalued gem, yet it has significant drawback - the displacement does not interpolate between adjustment pixels. This shortcoming in combination with the fact that Photoshop uses very fine noise to smooth transitions between gradations in 8-bit channels and therefore creates very unsightly, jugged effect even when displacement source is a gradient. Unfortunately the filter does not work with 16-bit channels and its closest relative - Liquify uses meshes instead of images for input.
So here is my question: does any of you aware of a way, in Photoshop or otherwise to create silky smooth displacements within 2D imagery (there are bunch of software to accomplish it in 3D) using interpolated 8 bit or original 16-bit (or higher) images as source?
The attached image was produced by displacing perfectly smooth word "test" with plain black to white gradient at 999% displacement strength.
how to create a really smooth posterised effect on a subject.
View 8 Replies View Relatedhow'd they do that?
View 9 Replies View RelatedI've never had this problem before. I'm using the standard soft round brush to blend colors, which has always given a smooth effect, but now it suddenly looks all pixelated. The brush strokes also appears in rings instead of a smooth gradient. It looks as if the picture has been sharpened too much or saved in bad quality. I've already tried things like changing the brush settings, deleting Photoshop preferences, increasing the RAM assigned to Photoshop, but nothing works.
View 98 Replies View RelatedI'm new to this board and would like to know the question about how to make a photo that is reduced to besmooth and sharpen, actually sort of digital filter effect like imagemagick can do. I need that for resizing adult images and made them to be attractive not rough.
actually I have bulk actions when I'm doing this procedure and only do these things: reduce image from example around 900x600 to 180x120 and then I just do filter - sharpen - sharpen.It's nothing special comparing to this photo
I was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies View RelatedI just had my gopro take 377 pictures over a few hours (30 seconds apart) and imported them all into the timeline. What I want to do is compress all these to a time frame somewhere around 1-1:30 or so just for a short clip of clouds moving across the sky. This is easy enough to do by selecting them all and bulk changing the duration to some fraction of a second. The problem is that it was quite breezy so the movement of the tree branches from one frame to another make it more "jerky" than I want when playing back.
Is there some way to smooth this out, I was thinking a real short fade transition between each frame, but that would take a month of Sundays and I don't know if I can get the transition short enough. I tried importing with default transition to cross-fade but the transition was way too long.
Does it exist? If not, why not? I discovered it in SAI and it's amazing how easily one could draw smooth curves with the brush/pencil without a need to mess with vectors but SAI is seriously lacking in many basic things that Paint.net has (i couldn't even change the size of a cut/pasted object). It would be perfect if Paint.net had it.
View 1 Replies View RelatedWhen using the brush tool (and others) in Elements, I am finding that when I paint only the center of the curser is filled with color. How do I adjust the brush and or curser to fill the entire area right up to the edge of the selection? I recently upgraded from Elements 10 to 12.
View 8 Replies View RelatedHow can we recreate the below border effect (not the center content, but the outer border)? In particular, we'd like to recreate the effect whereby the border fades out half way up the content area, and there appears to be a slight gradient which also starts at the bottom and fades out half way up?
View 4 Replies View RelatedI need to try and create a swish that looks like it was done with a pointed paintbrush. So it looks like the brush was pushed down at the start of the swish but towards the end the brush was lifted so the swish tapers out to a point.
View 9 Replies View RelatedI like to make patterns in photoshop and usually my only way of doing this is by making an image, then transforming it down 50% and left 50% (So it takes up 1/4th the image) then pasting the image to fill up the other 3 quadrants. After doing this I can see the seams that would normally be at the edge of my pattern, then I can edit them out. This gets more and more time consuming as my patterns get more complicated.
I was wondering if there is any way to change the brush tool so that if I draw over the edge of the canvas, the brush will automatically send those pixels to the opposide side. Sort of like in old NES games where you could run off the edge of a level and reappear on the other side of it. Or you could stand on the edge of the level and mario would be half on the left and half on the right. Does anyone know what im referring to?
I try to erase part of a layer, it won't have an effect when the eraser is switched to brush or pencil. But it does work fine when set to block.
However, -and here's the strange thing- when the eraser is set to brush and the erase isn't working, if I go at the layer crazily, constantly clicking at the layer, eventually the eraser does work! Every single click is registered in the history window, but the actual action of erasing only actually happens sparsely after random clicking. And it seems to be completely random as well. It doesn't seem to depend on where I click, or the frequency of clicks or even the time after the first click.
How to do center Halftone Effect in CorelDraw in Photoshop Corel not getteing proper result.
View 5 Replies View RelatedWhen i use an adjustment brush it will not work when I move the cursor to the center of the screen, in the rest of the image, and when I move or zoom the image it will work, so I can use the adjustment brush anywhere in the image, as long as it is not in the center of the screen.
View 1 Replies View RelatedI need to make a glow effect around the brush. I have attempted this in Adobe Illustrator (using the "Outer Glow" effect) but I am distinctly underwhelmed by the results.
View 1 Replies View RelatedHow to achieve this effect of the light spurring out like this in photoshop?
View 2 Replies View RelatedOn one image I used ripple texture to simulate shine on glass and it worked great. On another image, I tried to do the same thing but the texture is a small repeat pattern and doesn't look like glass at all. I tried to get the effect by changing size and hardness and pattern size of the brush but no luck. What should I do?
View 4 Replies View Relatedusing mac OS 10.6.8 with CS5 Xtnd: I don't get it! When I first began using this app (and I've spent much time swearing at it with no result) and until recently and in either normal or full size mode showing xhairs and whether I use as paint or erase the effect is always considerably less than the diameter of the tip.
What is with this? I require a tip that goes right to the edge of what is supposed to be the tip...
I would like to create a brush to apply on a stroke which has the same effect as the bulbs around the word "circus" in the logo below.
View 12 Replies View RelatedCan I use a brush to apply gautasian blur? I have paint shop pro x6.
View 6 Replies View Relatedwhenever I try to create the effect to looks flat. The red lines stay on the top and do not wrap it suggesting the straw to be 3D. Another problem i am having is making the shadows on the straw to also look realistic.
View 7 Replies View RelatedWhen using the Adjustment Brush to mask a portion of a RAW image so I can reduce the exposure of only a part of my photo I get an uneven effect. It appears that the mask is not affecting some pixels of the area I'm trying to adjust. The photo was taken inside a cathedral in Vienna where the lighting wasn't great so I used an ISO of 3200 on my Nikon D7000 camera. I made noise reduction adjustments before attempting to use the Adjustment Brush. A portion of the image is shown below. I have had the same problem with other photos when using the Adjustment Brush. I've tried different Feather, Flow, and Density settings without noticable improvement.
View 3 Replies View RelatedI need the brush size for the write-on effect to go larger than 50.
View 4 Replies View RelatedHow do I create a brush for spray effect like below?
View 2 Replies View RelatedI've been playing around with the pen tool and i was wondering whether there was a way of altering the brush dynamics so that when i stroke the path it produces a tapered effect i.e. so that the path starts as a point, grows thicker towards the middle, then tapers back to a point?
View 2 Replies View RelatedThe adjustment brush in the Develop Module doesn't show any effect
when I try to use them in Lightroom 5
I'm a pretty advanced photoshopper but I always wondered how people get a piece apart from a photograph, for example I want the car on the following photo, but only the car, not the rest of the picture. Code:
View 4 Replies View RelatedHow do I CG a traditional art piece on photoshop that i've made that has been inked and such while giving it depth and lighting without making it look unrealistic? I've tried to find this from sites and desided that maybe it would be better if i got a multi-help unit to help me get this through my thick skull here.
View 5 Replies View Related