How do I CG a traditional art piece on photoshop that i've made that has been inked and such while giving it depth and lighting without making it look unrealistic? I've tried to find this from sites and desided that maybe it would be better if i got a multi-help unit to help me get this through my thick skull here.
View 5 RepliesI was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies View RelatedMy office is using Adobe Photoshop CS, English version. When I try to type some chinese, it is okay, but only apply for the dafault chinese fonts inside the photoshop.
When I try to install some new chinese fonts, and try it on the photoshop, all the words will become "another word".
This problem is very ignoring... I hope someone will know how to solve it.
Can a digital peice of art be printed to look and feel like a painted work? Is there a printing method that will go further than just paper printing?
View 5 Replies View RelatedHow to create artwork that uses the styles of traditional art forms such as oil, watercolor, acrylic painting? Or even Crayon, pastel, charcoal, sketch drawings? As in recreating the how the brush strokes in sketching or oil painting or like crayons the texture. Mostly the recreating the overall styles of those traditional mediums?
View 11 Replies View RelatedI'm a pretty advanced photoshopper but I always wondered how people get a piece apart from a photograph, for example I want the car on the following photo, but only the car, not the rest of the picture. Code:
View 4 Replies View RelatedI have a ton of stock images with the backgrounds removed that I need made to look like a puzzle piece with a 3D feel and a slight shadow to make it look like it's floating above the canvas.
I also will need to make an indented outline of the image where the puzzle piece would fit. I've attached an example of what I'm looking to do (I don't need the wood background, I think I'd probably just use a solid color).
I have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 Replies View RelatedI've been using Photoshop for a while now.. and I've always wondered... is it possible to actually alter the handwriting on a piece of paper, seen in the image?...
Am I able to change the letters "GARV" on the paper, to something like, "CAKE" or "JOHN" or "AUSTRALIA" ?
Matching the handwriting of "GARV" isnt a huge plus, but making the altered word look realistic, as if it were written before the image was taken. Code:
The project involves me cutting out pieces of various images, and pasting them into one main image. It was going fine for the first ten or so image pieces, but the last time I tried to do it, something very strange happened.
When I pasted the piece of an image into my main image, it came out red and transparent.why it's doing this because I didn't change anything or do anything differently. What can I do to fix this?
I'm sure you know what Iron Man looks like. I'm trying to figure out how to make the glowing eyes and the chest piece for him.
View 2 Replies View RelatedHow does one use "Channels" to extract a portion of a photo for use in another piece?
View 1 Replies View RelatedI have problem getting that smooth effect especially in the center of the piecehow to achieve this with a brush, i tried with lower opacity, flow, brush settings, the effect is kind of liquify, like the guy used smudge kind of, but not really[URLs]...
View 9 Replies View RelatedI have received permission to use the attached logo (1st image) on a business card for a project.
I want to place it on a blue background, so I've copied the type in Illustrator switched the colors so everything can be read against blue and worked well. However, I can't seem to get whatever file type I place of the shield in Illustrator (tiff, jpg, gif) to not have white pixels around it. You'll see what I mean in the attached 2nd image.
I made a selection of the shield and then did a layer mask of the rest of the logo. There are some extra pixels but some are so small that I don't think I can get them all. I've tried placing the logo in InDesign too and there is the same issue.
I have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies View RelatedI want to print a folded greeting card from the templates offered by Photoshop Elements, but the printing process requires you to essentially print three things: front, left-hand greeting and right-hand image. It doesn't have one template for just the front and back and another for the inside.
View 7 Replies View RelatedCan anyone tell me how to change a photo to black and white but leave a handband in the photo in color? I just can't quite figure it out!
View 4 Replies View Related[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
Suddenly I'm having problems with the Arrange/combine/slice feature.
When I attempt to slice off a piece of an image, another straight cut occurs somewhere else on the image.
On the attached sample, I drew a wavy line like the one shown across the right arm of girl in the image and along with the expected slice was the vertical slice through the image. I backed up and started again, and the exact same vertical slice occurred.
This happens frequently, the unwanted slice is always straight , but sometimes horizontal, and sometimes angled. I'm using Wacom Cintiq tablet.
I'm having the same problem with my trial 7 version. I've been 'slicing' since Xara was a puppy.
If you already have your main floor created in a Revit LT model and you later decide you'd loke to add a small addition to that same floor, not as an addition, but simply as a revised floor plan that expands the previous area, can you just draw another floor area and will that blend into the 1st main floor? Or do you have to redraw the whole floor? Or join the 2 pieces?
View 3 Replies View RelatedAny good way to make a wrinkled (not scrunched) piece of paper without using cloth simulations? I know, sounds really easy but I'm not getting great results!
View 1 Replies View RelatedIve been working on a piece of art for about a week when suddenly i was having some computer issues. I restart my computer and open up my gimp file and a file that previously had three layers now has one layer. The other layers where seemingly deleted, and i don't know why. Ive read another thread on here that was dealing with the same issue yet none of problems or solutions applied to my problem. This did happen one time before and all the layers were deleted, but i just started the project over again. The art i lost was being licensed, and I'm sort of freaking out.
View 1 Replies View RelatedI wanted to draw a piece of duct....a transition piece to go from circular duct to rectangular duct, and make it so that the circular is offset from the rectangular.
I didn't need anything too pro so i started with a rectangle and a circle, then started drawing a few interconnecting lines. I tried a few 3D commands, but none of my usual seemed appropriate. What loft does?
quick search on yt: [URL].....
click - click - click and it's done! i reckon the whole shape could be done in under a dozen clicks!
gave SHELL a go with it and it's exactly what i was aiming for (never thinking i would get close). i've no idea why it is called 'loft' tho!
I think I am having trouble with how a certain system font displays in Illustrator. I am not sure which font it is. Why I am getting a swatch list that looks like this:
All these "mystery" swatches are associated with a piece of artwork that was obtained from a stock image website.
I am working on a video for my friend who after I'm almost done has given me a longer piece of music that would throw the tingeing of the video off. Is there a way to add a say 10 second chunk in the front of it without having it change the timing.
View 10 Replies View RelatedI have this obect (see attached IPT) with a piece that is cut off from the main object but I can't figure out how to remove it (the piece in the top left in front view).
View 3 Replies View RelatedI'm modding a game at present and wanted to put a symbol on the back of a piece of armor.
I created the armor and symbol in seperate files, then opened the armor file, then did an "open as new layer" for the symbol I wish to paint on the back of the armor.
I'm obviously having some kind of context issue, every time I click the image to move it around the "Adjust Color Balance" menu pops up instead of allowing me to move the symbol around.
How to make the piece appear gradually, piece by piece until all of it?
View 4 Replies View RelatedIn the attached file I have a curved piece of sheet metal made with the contour flange tool. All I want to do is put a hole in the center of the sheet.
View 3 Replies View RelatedI am trying to model simple translation piece from rectangular to circle (one quarter). There is angle between rectangular side and circle side. I am able to model it very simple, but I have found that Inventor make some errors with lofted flange. Usually this type of translation piece should have flat triangles on the ends and bended triangles in corner. Unfortunately for some combinations of width/depth/diameter Inventor does not keep this rule and add some bended triangle to end edge.
Enclosed is pdf file with picture how this part should look, what is the problem and finally the ipt file is enclosed too. The part is OK with parameter SizeY=250mm and less and is wrong for bigger SizeY (for example 600mm)
how do i in find option find a piece of text and zoom to it? it was there in autocad 2008 but i can't find it in 2009 version
View 6 Replies View Related