I have this obect (see attached IPT) with a piece that is cut off from the main object but I can't figure out how to remove it (the piece in the top left in front view).
View 3 RepliesI have this photo below. As you can Imagin I'm trying to use Resynthesize to remove the piece of tree that there is on the bottom.
I'm applying it, but It doesn't make dissapear the piece of wood in a clear way, instead, it did another operations.
Can you tell me how to select to make it work?
What parameters are you using in Tweaks tab? (Neighbourhood size, Search thoroughness, Sensitivity to outliners..)
Gimp 2.8.4. I don't know the version of Synthesizer.
Is it possible to remove associativity between mirror object.like we have in autocad.?
I want to delete source object without deleting mirror object.
I am running Inventor 2013 Professional 64 bit. When I print to an Adobe PDF I have selected "Remove object line weights". The problem I am experiencing is that the result is the same whether it is checked or not. The result I would expect is that the object line weights won't display on the pdf.
View 8 Replies View RelatedI was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies View RelatedHow to make the piece appear gradually, piece by piece until all of it?
View 4 Replies View RelatedIn the attached file I have a curved piece of sheet metal made with the contour flange tool. All I want to do is put a hole in the center of the sheet.
View 3 Replies View RelatedI am trying to model simple translation piece from rectangular to circle (one quarter). There is angle between rectangular side and circle side. I am able to model it very simple, but I have found that Inventor make some errors with lofted flange. Usually this type of translation piece should have flat triangles on the ends and bended triangles in corner. Unfortunately for some combinations of width/depth/diameter Inventor does not keep this rule and add some bended triangle to end edge.
Enclosed is pdf file with picture how this part should look, what is the problem and finally the ipt file is enclosed too. The part is OK with parameter SizeY=250mm and less and is wrong for bigger SizeY (for example 600mm)
I'm new to autodesk. I cannot seem to figure out how to angle a piece of material after it has been extruded.
For example, If I create a shape ie. a 10mm square and extrude the shape to a length of say 100mm, and want to miter either end at 45 degrees so as I can join them to create a 90 degree angled piece....
How do I angle the end of the extruded piece?
I know it can be done with a simple chamfer but this is not ideal when dealing with more complicated shapes.
I am using autodesk 2012.
I have a piece that I'm trying to develop to add into an assembly. The piece I'm trying to create is a cast piece of steel that I'm trying to form to a radius. The piece basically starts out as a flat part and then is formed to a radius. I want to form it from flat to radius so that the contours will match the radius of the piece.
View 5 Replies View RelatedI have a rectangular piece of sheet metal and all I want to do is make the sheet curved with a radius of 113.75 in.
How do I go about this? Is there an easier way like making a 3d sketch and putting a sheet metal face on it?
I am wondering if there is a way to use a part of one piece located in an assembly to cutout a portion of another piece located in an assembly when both pieces occupy the same space?
The situation I'm in is that I've got an L bracket (piece 1) resting on top of a piece representing a concrete block (piece 2). The L bracket has metal studs attached that protrude into the concrete. Idealy I'd like the mass of concrete located in the same space as the studs removed so that when I generate cross sections everything adds up.
I am wanting a piece of info that I cannot seem to locate in the spur gear generator. I will post a picture when I have a chance, but what I am looking for is the 'W' figure (distance over 'x' number of teeth at the pitch line). What I have is a 19.xxx deg. helical gear so the best way to get this info is calculate it, but again, I dont see it in the inventor calculation.
Inventor 2014 PDS
I am using IV 2010. I am trying to make a 5/8" sheet metal piece with the surfaces shown. I have tried to thicken the surfaces but do not get the results I am looking for. After the surfaces are thickened I need them to be able to lay flat with flat pattern command.
View 4 Replies View RelatedI inserted an OLE object (a pdf) onto paper space and now I cannot grab it to get rid of it.
View 4 Replies View RelatedThe only way I know to remove the segment of this 3d object in between the orange lines is to slice on each orange line and select to keep both sides which is pretty tedious since I will need to do this every 3 feet over a 170 foot span....is there another easier way to do multiple mortar joints on a 3d object like this?
segment.gif
How can I remove an object I just selected from a selection set? I can't find the setting that allows this. Is it some combination of items check under the selection modes in the options menu?
View 2 Replies View RelatedI've created arc, then 3 side polygon and placed created array. Now I want to delete those sides. How can I do it?
View 2 Replies View RelatedI'm trying to plot a 3D object but can't remove the hidden lines. On typing "hide" they are removed and appear removed in the plot preview but they still appear in the hard copy.
View 1 Replies View RelatedI cant seem to get the clean command to do anything, it asks whether i want
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...
I'm using AutoCAD 2013 for Mac, and it works perfectly fine and normal. However, everything I draw, weather its a line, a shape or different objects crossing each other, will have some kind of tag next to it, telling what kind of corner or intersection it is. It's very informative, but they are simply too larger on my display, I hardly get to see what I'm drawing. So frankly I'd love to know how to remove them.
View 3 Replies View RelatedI tried to use the command "Remove Material" from the rippon, and I get no rsponse, and deleted the material from the palette and yet the material there, How can I get rid of the materials I attached to the walls?
View 1 Replies View RelatedI have an image where I want to remove an object. I'm using CS6 version. The object is a tractor.
I've tried to use the Content Aware tool and my result turned out to be a bush. I've also tried the spot healing brush and eraser tool. The result was the same.
Need removing this object? Right now, I'm at a loss as to what to do.
You can find the image here [URL]....
I can't remove the background from a logo I have created. I am using Photoshop Elements. I bought a book and I searched the help index's and I could not find how to do this. I'm somewhat new to Photoshop but not a very beginner. I created the logo on a transparent background, but when I save it there is always a square border around the logo, usually white. I just want a .jpg of the logo itself.
View 2 Replies View RelatedI need to remove a object from a picture, and make the background look like the object was never there.
View 2 Replies View Relatedi opened my psd and realized that a while back i had made a smart object from the wrong layers. (my point is that i dont have an 'undo' option in my history).
So how can i remove this smart object - i want my layers back.
I have objects in perspective but i need to remove them and make them flat and normal again rather than in a perpective view. How can I remove them without redrawing everything?
View 2 Replies View Relatedmy dad was on vacation at London and he used his phone to and DSLR camera to take photo. in his phone, theres a camera app called "camera360".
my dad used it and it was in "ghost" effect. my dad forgot to turn it off and took many pictures but most of them are spoiled. so how can i remove using photoshop? i will include a picture as example
I have taken a short video of a man sitting at a table. There is no movement but the man is talking. A little bit of the microphone can be seen. I tried to take the video into Paintshop Pro X3 to remove this object with smart carver. Is there a way to edit this video so that unwanted objects can be removed from the frames. I have Paintshop Pro X3 on this computer, and PhotoImpact on another computer. Can either of these programs be used to remove objects from frames.?
View 1 Replies View Relatedis there maybe method to remove the transparency from an object with key shortcut?
So faster than selecting the object, clicking on Transparency tool and selecting in menu No transparency
How can I remove the white background of an object in CS6
View 5 Replies View Related