I have a ton of stock images with the backgrounds removed that I need made to look like a puzzle piece with a 3D feel and a slight shadow to make it look like it's floating above the canvas.
I also will need to make an indented outline of the image where the puzzle piece would fit. I've attached an example of what I'm looking to do (I don't need the wood background, I think I'd probably just use a solid color).
I was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies View RelatedHow did they do this puzzle effect?
View 4 Replies View RelatedHow do I give a picture or a drawing a puzzle like view?
View 4 Replies View Relatedcreating your own templates for jigsaw puzzle pieces? So far, I can create these in CS6 (no longer seems to have Texturizer with a jigsaw puzzle texture like earlier PS versions) by using a single template (found with a YouTube video on this topic) for a specific number of pieces, confined to the one template.
I would like to make jigsaw puzzles with a variety of pieces, so it would be useful if I could create my own templates with different numbers of pieces. There are PS plugins but these have costs associated with them, especially if used commercially. If possible, I'd rather create my own templates (in PS or AI). For example, I'd like to create an "easy" puzzle template with 20 pieces.
If none exist, an option would be to re-install PS CS 4, 5 or 5.5, alongside CS6. Not sure which is the last version to have Texturizer with a jigsaw texture, but it may be CS4 (by additional download for CS5). But, not having seen or used it in earlier versions, I also wonder if it has sufficient configuration options to choose the number of pieces for a jigsaw? As mentioned, would like to create a range of templates all with different numbers of pieces.
For a promotional campaign I'm working on, I'd like to take a picture and "break it up" into puzzle pieces, then move those pieces around to mimic the look of them floating into place as the image is completed.
I have a great handle on the "move them around" and "float into place" parts, but I'm having no luck with the puzzle piece end of this, that I did previously using blocks. It's the right effect, but I really want that jigsaw puzzle look to this next one.
I use CS2 on Win XP SP2
When I right click any entry in the Layers pane of PSP8 I get this odd box instead of the context menu:Are the following Usenet newsgroups now closed?
coreI.PaintShopPro8
coreI.PaintShopPro_Scripting
Ubiquitous Information:
Adobe Illustrator CS6 v. 16.0.3 (32-bit)
Win XP sp3 OS
I have a vector art file of puzzle pieces (connected as though the puzzle has been assembled) that I would like to use with an image file. If I wanted the entire image to appear finished, I would simply place this vector layer above the image layer and voila...finished puzzle. However, I would like to use the 3D effects in Illustrator to make it appear that some of the pieces are not yet seated into place. I know how to do this with the puzzle vector art, but how do I attach or clip the image layer to it so that it rotates, bevels, etc. with the individual puzzle pieces I want to treat in this manner?
I take hundreds of photos in burst-mode against a green screen. Using photoshop I made a selection with the magic wand, I inversed the selection, copy and pasted the selection to a new 'empty' layer, deleted the background, then save the result as a PNG file to preserve the transparency.
Obviously I need to have a batch process to do this! The PhotoPaint script recorder would seem to be ideal for this but I'm having a tough time figuring it out. I've managed to mask and copy my selection to a new layer (confusingly called 'object' in Photopaint) and save it. I can't record deleting the background for some reason, neither can I successfully save it as a PNG, on top of that it's now it is saying my file names are invalid! Is there any way of doing what I want with this program?
I am wondering if there is a add on for Corel Draw x4 to make it so I can make animal puzzle paterns?
View 2 Replies View RelatedThe left-hand part was created by someone else, using the bend part command in the "modify" tab.The right-hand part was created by me using fold in the sheet metal environment, using the same sketch.Why, is my part shorter?
View 3 Replies View RelatedI am trying to create a puzzle from an image but I am having some trouble with the edges of each puzzle piece. Basically in short what I am doing is this.
1) I load my image in gimp (image layer).
2) Create new white layer (puzzle layer).
3) Use Filters -> Render -> Pattern -> Jigsaw...
4) From the Jigsaw windows I select; Bevel width; 0, Highlight; 0, Jigsaw style; curved.
5) I then select the white area from the puzzle later, copy this area from the image layer, and paste this on a new layer (piece layer).
6) I duplicate the piece layer (duplicate layer).
7) Paint the piece in white in duplicate layer.
8) In duplicate later I select Filters -> Blur -> Gaussian Blur
9) In piece layer I select Filters -> Map -> Bump Map
10) I select the duplicate layer as layer.
My problem is that the edges look really bad. Is there any way how I can make them look better? That is, not so much crippled?My aim is to have each puzzle piece in a different layer since I have to save them in different files. I checked several tutorials on how to create puzzles but all give me similar results.
Are their any scripts for PSP for cutting out a Jigsaw Puzzle from a photo or graphic ?
View 2 Replies View RelatedI'm a pretty advanced photoshopper but I always wondered how people get a piece apart from a photograph, for example I want the car on the following photo, but only the car, not the rest of the picture. Code:
View 4 Replies View RelatedHow do I CG a traditional art piece on photoshop that i've made that has been inked and such while giving it depth and lighting without making it look unrealistic? I've tried to find this from sites and desided that maybe it would be better if i got a multi-help unit to help me get this through my thick skull here.
View 5 Replies View RelatedI have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 Replies View RelatedI've been using Photoshop for a while now.. and I've always wondered... is it possible to actually alter the handwriting on a piece of paper, seen in the image?...
Am I able to change the letters "GARV" on the paper, to something like, "CAKE" or "JOHN" or "AUSTRALIA" ?
Matching the handwriting of "GARV" isnt a huge plus, but making the altered word look realistic, as if it were written before the image was taken. Code:
The project involves me cutting out pieces of various images, and pasting them into one main image. It was going fine for the first ten or so image pieces, but the last time I tried to do it, something very strange happened.
When I pasted the piece of an image into my main image, it came out red and transparent.why it's doing this because I didn't change anything or do anything differently. What can I do to fix this?
I'm sure you know what Iron Man looks like. I'm trying to figure out how to make the glowing eyes and the chest piece for him.
View 2 Replies View RelatedHow does one use "Channels" to extract a portion of a photo for use in another piece?
View 1 Replies View RelatedI have problem getting that smooth effect especially in the center of the piecehow to achieve this with a brush, i tried with lower opacity, flow, brush settings, the effect is kind of liquify, like the guy used smudge kind of, but not really[URLs]...
View 9 Replies View RelatedI have received permission to use the attached logo (1st image) on a business card for a project.
I want to place it on a blue background, so I've copied the type in Illustrator switched the colors so everything can be read against blue and worked well. However, I can't seem to get whatever file type I place of the shield in Illustrator (tiff, jpg, gif) to not have white pixels around it. You'll see what I mean in the attached 2nd image.
I made a selection of the shield and then did a layer mask of the rest of the logo. There are some extra pixels but some are so small that I don't think I can get them all. I've tried placing the logo in InDesign too and there is the same issue.
I have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies View RelatedI want to print a folded greeting card from the templates offered by Photoshop Elements, but the printing process requires you to essentially print three things: front, left-hand greeting and right-hand image. It doesn't have one template for just the front and back and another for the inside.
View 7 Replies View RelatedCan anyone tell me how to change a photo to black and white but leave a handband in the photo in color? I just can't quite figure it out!
View 4 Replies View Related[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
Suddenly I'm having problems with the Arrange/combine/slice feature.
When I attempt to slice off a piece of an image, another straight cut occurs somewhere else on the image.
On the attached sample, I drew a wavy line like the one shown across the right arm of girl in the image and along with the expected slice was the vertical slice through the image. I backed up and started again, and the exact same vertical slice occurred.
This happens frequently, the unwanted slice is always straight , but sometimes horizontal, and sometimes angled. I'm using Wacom Cintiq tablet.
I'm having the same problem with my trial 7 version. I've been 'slicing' since Xara was a puppy.
If you already have your main floor created in a Revit LT model and you later decide you'd loke to add a small addition to that same floor, not as an addition, but simply as a revised floor plan that expands the previous area, can you just draw another floor area and will that blend into the 1st main floor? Or do you have to redraw the whole floor? Or join the 2 pieces?
View 3 Replies View RelatedAny good way to make a wrinkled (not scrunched) piece of paper without using cloth simulations? I know, sounds really easy but I'm not getting great results!
View 1 Replies View RelatedIve been working on a piece of art for about a week when suddenly i was having some computer issues. I restart my computer and open up my gimp file and a file that previously had three layers now has one layer. The other layers where seemingly deleted, and i don't know why. Ive read another thread on here that was dealing with the same issue yet none of problems or solutions applied to my problem. This did happen one time before and all the layers were deleted, but i just started the project over again. The art i lost was being licensed, and I'm sort of freaking out.
View 1 Replies View RelatedI wanted to draw a piece of duct....a transition piece to go from circular duct to rectangular duct, and make it so that the circular is offset from the rectangular.
I didn't need anything too pro so i started with a rectangle and a circle, then started drawing a few interconnecting lines. I tried a few 3D commands, but none of my usual seemed appropriate. What loft does?
quick search on yt: [URL].....
click - click - click and it's done! i reckon the whole shape could be done in under a dozen clicks!
gave SHELL a go with it and it's exactly what i was aiming for (never thinking i would get close). i've no idea why it is called 'loft' tho!