Photoshop :: Font Not Listed
Apr 2, 2008
I have a font on my system (Geometr231 BT if it matters). It's a TrueType font. It shows up in all of my other programs on their font lists, but NOT IN PHOTOSHOP 5.5.
Many TTFonts are unfortunately country-coded incorrectly due to a bug in a font creation application that quite a few foundries were using.
The fonts are listed alphabetically by country code, starting with
Western European.
If you open your adobefnt.lst file in a text editor, you will probably
find those fonts that are giving you problems have one of the
following entries:
WritingScript:Greek
WritingScript:Cyrillic
WritingScript:EastEuropeanRoman
when they should have
WritingScript:Roman
Changing the entry to WritingScript:Roman *may* help - but I would
make a copy of the file first....
If you do change the entries in the Adobefnt.lst, you will need to set it to read only to keep those settings. It will then not reflect any changes you make to your installed fonts.
View 7 Replies
ADVERTISEMENT
May 16, 2012
I have been using Xara for a very long time. I have recently started a side business generating signs and banners and continue to use Xara as my primary graphics editor, but I've discovered a tiny issue and I'm hoping there is some way around it. The Font Size live preview slider is limited (for some reason?) to sizes less than 32pt, and the font drop down list starts getting coarse after 24pt and tops out at 72pt sizes. Since most of what I'm doing involves text sizes larger than 72pt and much larger than the 32pt the slider allows, both of those options for adjusting font size have lost their usefulness.
Is there any way for me to adjust the values for the slider and/or for the drop down list to allow larger numbers? I realize I could use a scaling factor and layout my signs as a fraction of their intended size, but then I have hope to remember to change the scale when I import it into my sign cutting software or run the risk of wasting vinyl, so that would be my last choice.
Surely I can't be the only person who uses large text?
Also, any issues with exporting text into EPS and getting a change in the case of the text? If I export "This is Text" as an EPS file, when I import it into my sign cutting software, I sometimes get "tHIS IS tEXT", but if I import the same EPS into Xara it looks normal. Not sure if that is Xara or the sign cutting software (LXi Express Expert edition)... Until I figure that one out, I make sure to convert text to editable shapes before exporting it...
View 6 Replies
View Related
Aug 6, 2008
When I moved from XP to Vista, it seems I've lost many fonts. I have installing them directly into the Common folder with no success.I have less than 500 fonts.
View 9 Replies
View Related
May 7, 2013
I get an error code U41M1C212 when trying to upgrade in PS Elements 11.I am running MS Windows 8.This doesn't seem to apply as I do not see any of those MS virtual adapters listed. URL....I also disabled firewalls and got the same error message.
View 5 Replies
View Related
Jun 23, 2011
I have a scanner issue and wanted to load a psd to show the problem (600 almost looks better than 1200) but when I upload, it gets rejected. It's ~21 M.
Another issue re: scanners. Mine only has jpeg, bitmap, png and a few other file types. These are actual photographs and I'd like to scan them in RAW.
View 9 Replies
View Related
Jan 11, 2013
I'm a new user to PE. How do I export photos for printing by others than that listed in PE? I don't want to use Photoworld - limited print size options, etc.
View 5 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
May 14, 2013
I have a bit of code that I use to create hatches but the names are just coded inside (like "BRICK" or "CLAY"); I would like to list all available patterns for the curent drawing(on a form, using a combobox, etc), which is the best way to go?
View 2 Replies
View Related
Feb 27, 2013
I need a 1:50 annotation scale but it is not listed do I have to make this scale and add it?
View 2 Replies
View Related
Aug 11, 2011
I would like each type of light to only be listed on the schedule once. The schedules seem really unstable, everytime I look at it the whole thing has changed. There are so many extra items listed and I don't know where they came from. The mark numbers are weird like AAAA, AAAAAA, BBBB, BBBBB. I don't know how these got added or why they have such strange marks.
View 4 Replies
View Related
Jan 7, 2010
I am using Lightroom 2.6 on Windows 7 Ultimate 64 bit, and the browse for files or folders dialog that comes up when I need to choose location for my raw files imported as .dng does not list all hard drives of my computer - it only lists contents of my user folder in drive C:/ - thus making it impossible for me to choose any other location than those within my user folder. I attach two screenshots - 1/ Normal browse for folders dialog as it appears from within Windows explorer. 2/ Same dialog as invoked by Lightroom - with all drives missing.
View 14 Replies
View Related
Aug 30, 2010
Just as of today, as I begin adding objects &/or text to a graphic, absolutely nothing is 'showing up' in the Object Manager under Layer 1. It seems like always in the past, whenever I added a shape or text or curve or anything, a new line would be added under whatever Layer I was working in, detailing the object's properties.
Is there some simple config-setting that I tripped without knowing it?
View 4 Replies
View Related
Sep 29, 2011
I can not figure out why my annotation scale list has very few scale listings to choose form. The only scales that are listed are ratio (i.e. 1:1), i seem to be missing feet and inches (i.e. 1/4" = 1'). Is there a way to turn the rest of the scales on?
View 3 Replies
View Related
May 8, 2013
I'm using Lightroom 4, currently waiting to upgrade to 4.4. However, I'm having a problem not finding any of my lens profiles listed in the lens correction control panel. If I check the box, "Enable Profile Corrections" and then select from the "Lens Profile" dropdown menu, I get a list of only six available lens brands: Apple, Canon, Nikon, Sigma, Sony, and Tamron. This is odd, because when I view the package contents for the software under Package Contents > Contents > Plugins > Resources > Lens Profiles - ALL the lenses that I use (Pentax) ARE listed there. Why then will they not show up in the interface of the actual software when running?
View 2 Replies
View Related
Jan 22, 2012
My photo files have all disappeared and are listed as " Missing". I don't know how this happened and do not know how to get them back ?
View 17 Replies
View Related
Nov 2, 2013
When I click on the makeup tools in version X6 – 64-bit it brings up 5 separate tools. I can find no options for the suntan or thinner tool although its states clearly in the user manual and other functions that there should be size and strength options. I have checked this forum and there are some posts that say there is no strength option for the suntan tool, however this is not what the user manual states. Is the user manual and the help function incorrect and if not, how do I bring up these options?
View 3 Replies
View Related
Jun 4, 2012
Under Sheet Set Properties, I have more than one Callout block listed.
But when I go to sheet views and right click a view, only the 1st callout block that I used is available under place callout block.
How do I chose a different callout block? 2013 Civil 3D
View 2 Replies
View Related
Mar 26, 2013
Is it possible to eliminate the Profile listed in the title are? I prefer to view the path in the title area. Sometimes the path can be fairly long and characters get cut off. If I could eliminate the current profile from being listed here, I could view more of the path. See attached.
View 2 Replies
View Related
Aug 24, 2011
Here's my background, im in the power transformer business, started as a winder (making the coils) but ended up making the design and drawings of them. Basically coils are cylindrical and we only make a radial cut view of it. Going from the center of the core to the outer most coil. The part list would typically have roughly 80 items for a full phase assembly, we make a drawing of the full assembly, then first winding, second winding, third winding, etc. The way i work right now is with standard drawings giving A, B, C etc dimensions, and when i make the piece for the transformer, i have to input the dimension in the excel part list by hand.
The can i do these things questions..
1-Only way to have individual items listed in the part lists would be with blocks right? The equivalent of inventor i-parts? Each block would have to be named after the item?
2-Can i add mass to the items? this could get complicated since its cylindrical, but in 2d... so i guess some math formulas would have to go in for this, as a cylinder with a diameter of 500, thickness of 5, and height of 1000 for example, would just be represented in the drawing as a rectangle of 5x1000, the diameter is the core center to the cylinder*2 (radial drawing). So the mass would need to take into account that the rectangle goes all the way around an axis.
3-I've played with autocad 2010 parametrics. With the axis as a base, i can enter the diameter of the first cylinder, then the thickness and height of everything that follows, the clearance from bottom and top also and if i change 1 value, everything adjusts to it. BUT can i change the dimensions via an excel sheet? If not, how hard would it be (i know a small bit of visual basic from excel), to make a LISP or VBA menu inside cad where we could enter the dimensions and the whole assembly automatically adjusts?
4-I make a drawing of the full assembly, then demolish it to each individual coils. The equivalent of an inventor .iam, would be xref in autocad? So i can makea coil 1, coil 2, coil 3, interwinding wraps, and then make an xref that would combine all of these into the full assembly? And also i guess if its split into 4 to 5 different drawings, the possible BOM out of there would be much easier to manage.
View 3 Replies
View Related
Nov 22, 2011
When trying to open or insert files, the folders and files are listed in reverse alphabetical order (Z on top to A on bottom) in AutoCad. All other programs are listed fine, Word, Visio, etc. Is there a variable I can type in? I have changed none of the setting that I know of. Using AutoCad 2009LT.
View 2 Replies
View Related
Nov 13, 2012
Why is the Nikon P7700 not listed in the camera profile dirctory of Lightroom 4.2, and not selectable in calibration menu?
View 11 Replies
View Related
Dec 15, 2011
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies
View Related
May 27, 2013
When connecting to an Industry Model one can use the Convert to Industry Model dialog.Here you can select the source you want to map. This can be an FDO connection, a file (SDF, SSQLite, DWG).If you choose DWG, 4 options can be used as input/source:
AutoCAD Entities,
Layers
Object data
Block Names
However, the MAP 3D feature classes (from Classification) are not listed here, nor can I find (Hoping I am overlooking it) a way of converting mapping them to the IM. Seems the only option is to redo the classification "defintion" effort again.
If this is the case, I am getting more the impression that Map3D is becomming a bunch of tools rather then a consistent framework supporting a step by step path from CAD to GIS to Industry Model type it is being marketed.
View 2 Replies
View Related
Feb 25, 2012
“Linetype” file” and “measurement” value are not listed in the properties pane..I’m wondering why the AutoCAD
doesn’t show the “linetype” file (acad.lin/acadiso.lin) from which a particular linetype is takendoesn’t show the “measurement” value (0 or 1) when a particular object is drawn Why these properties are not set on the property pane?
View 6 Replies
View Related
Apr 10, 2012
I'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies
View Related
Apr 8, 2013
Font is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies
View Related
Oct 13, 2013
I have brought in photos, added colour layers, and have had type files not show up in this particular document. There are seven other layers behaving normally. How to "find " these layers in the layers Column list as I would like to 1. move one, 2. delete one, and 3. merge one.
View 5 Replies
View Related
Feb 8, 2006
my font is so small and its font size is at 72pt how can i make it big again
View 5 Replies
View Related
Apr 11, 2003
When I make a text, and if I like to change the font style how can I do this with out having to click on the new font,
every time I choose a different font I have to click on that font, and if I don't like I have to click on a different one
I like to do it like in Flash MX I move the pointer over the list of fonts and may text change the font style with out click on it
View 5 Replies
View Related
Dec 28, 2011
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies
View Related
Jan 15, 2013
I've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies
View Related
