AutoCad :: Way To Have Individual Items Listed In Part Lists Would Be With Blocks Right
Aug 24, 2011
Here's my background, im in the power transformer business, started as a winder (making the coils) but ended up making the design and drawings of them. Basically coils are cylindrical and we only make a radial cut view of it. Going from the center of the core to the outer most coil. The part list would typically have roughly 80 items for a full phase assembly, we make a drawing of the full assembly, then first winding, second winding, third winding, etc. The way i work right now is with standard drawings giving A, B, C etc dimensions, and when i make the piece for the transformer, i have to input the dimension in the excel part list by hand.
The can i do these things questions..
1-Only way to have individual items listed in the part lists would be with blocks right? The equivalent of inventor i-parts? Each block would have to be named after the item?
2-Can i add mass to the items? this could get complicated since its cylindrical, but in 2d... so i guess some math formulas would have to go in for this, as a cylinder with a diameter of 500, thickness of 5, and height of 1000 for example, would just be represented in the drawing as a rectangle of 5x1000, the diameter is the core center to the cylinder*2 (radial drawing). So the mass would need to take into account that the rectangle goes all the way around an axis.
3-I've played with autocad 2010 parametrics. With the axis as a base, i can enter the diameter of the first cylinder, then the thickness and height of everything that follows, the clearance from bottom and top also and if i change 1 value, everything adjusts to it. BUT can i change the dimensions via an excel sheet? If not, how hard would it be (i know a small bit of visual basic from excel), to make a LISP or VBA menu inside cad where we could enter the dimensions and the whole assembly automatically adjusts?
4-I make a drawing of the full assembly, then demolish it to each individual coils. The equivalent of an inventor .iam, would be xref in autocad? So i can makea coil 1, coil 2, coil 3, interwinding wraps, and then make an xref that would combine all of these into the full assembly? And also i guess if its split into 4 to 5 different drawings, the possible BOM out of there would be much easier to manage.
View 3 Replies
ADVERTISEMENT
Apr 17, 2013
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
View 7 Replies
View Related
Mar 29, 2012
I'd like to know if it's possible to use two different styles of part list in the same project.
For example, one for assembly drawings and another for single part drawings.
View 4 Replies
View Related
Jan 29, 2013
I have drawn a small machine of 3D components in the model space. Each component is placed on a separate layer so that i can isolate each component. Now I need to print machine drawings for each component in paper space. I can open a view port in the paper space and freeze all the other components not needed to get the view of the one component. the problem is that on the next paper when i try and put a view of the next item by thawing the new item and freezing the previous one, this affects the first as well. What is the best way to isolate individual components from a 3D model for printing machine drawings?
View 2 Replies
View Related
Jan 29, 2013
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
View 1 Replies
View Related
Feb 14, 2013
I thought I'd be efficient & use one assembly with a couple View Reps to represent two variations of our product. But I ran into a problem editing two part lists on an IDW file. Most of the parts are identical.
I have two part lists on an IDW for the same asy & each part list is filtered for one of two View Reps - works great!But I discovered when I edit the item number order in one part list to harmonize with the other, the other one gets re-ordered also & no longer harmonizes with the first one.
Inventor Suite 2013 Ultimate
View 1 Replies
View Related
Jul 17, 2013
I'm making a dynamic block of a column radiator. Like all column radiators, this particular model comes in a range of heights, and a range of standard widths. But, because it's a cloumn radiator, you can always add another column, so making a non-standard width. There's usually a small cost associated with going with a non-standard width.
1. Is there a (fairly) simple way to represent this concept within a Dynamic Block?
2. At the moment, I'm ignoring this fact and just have a long list of all the valid increments. I did it as a list (as opposed to increments) so that the user could easily see what length they were providing.
As I see it, the downside of this approach is that the base point of the block is at one end of the radiator, rather than in the middle, so in most cases, if you stretch the block, you also have to reposition it. The best option would be to be able to choose whether the base point was in the middle or at one end (with the default being in the middle) but, and here's my question, if the base point is in the middle won't the list values be half their actual value? This would make radiator selection even more tediuos and confusing than it already is!
View 7 Replies
View Related
Nov 4, 2011
Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.
Is all this a glitch in the system or is there something in the set-up which is causing this problem?
View 7 Replies
View Related
Mar 6, 2013
This morning the shop brought back a set of drawings and requested that I provide a cut list for the fab department. Our drawings consist of an assembly drawing and materials list on the first page with several individual parts on each of the following pages. I am looking at including a column in the ML for the operation ( laser, saw, shear) and sorting the list by it. However when I do this the Item Numbers on the list are all confused. If a person were to look at a balloon on a drawing and then attempt to find it in the list it would be difficult and time waster.
The questions.
1. Is there a way to renumber the item list after sorting the material?
2. If I place an assembly view off the edge of the sheet for each of the following sheets and then place a materials list on each sheet, is it possible to create a plugin that would find which parts are on the sheet and hide all the other parts on the list? I have just started going through the "my first plugin" tutorial and this sounds like a place where it should be useful but I don't know which tags I need to look for.
View 7 Replies
View Related
Nov 18, 2012
I'm trying to hide all items in a document (and store each items original visibility state), iterate user pre-selected items and perform an export for each item in selection (I've got this part covered), and finally restore the visibility state of each item again (here's where the storing of original visibility state is needed).
I've found that I can iterate all items in the document using app.activeDocument.pageItems[i] where i is the page item identified by the i-th index in the pageItems collection.
What is not clear, however, is how to get the visibility state of this page item. Indeed, there is a property visbilityVariable associated with page items, but when I try to "inspect" its content using an alert message, I get "undefined".
Are there better ways to iterate all items in a document? Ideally, I'd like to access all items regardless of wether they're path items, group items, text frame items or what have you. I need this collection to read/write the visibility state of each individual item.
View 2 Replies
View Related
Aug 27, 2012
how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
View 7 Replies
View Related
Feb 7, 2012
I need to show a particular part in a drawing view so that it's clearly visible. I mean, I can see it fine, but I would like it to pop out a bit more than it does and not blend in with other lines around it. Is there anyway to do this? I know you can make an entire view colored, but I just want one part colored within that view.
If not, then how do I remove the lighting from a particular view so that the parts will show as solid colors in a drawing view? They currently show with like a white reflection or sheen and a sort of gradient coloring to them.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 2 Replies
View Related
Apr 25, 2012
I don't know how useful this will be but I was trying to figure out how to track what item number in an assembly any given part may be. I was thinking that on an individual part drawing I may want to reference the item number that is used in an assembly's Bill of Material for that part. I can't find where this may be stored for retrieval. If I do this I would want it to be automated so that if the BoM were renumbered the part file and drawing would update to the new item number.
This may not be possible since any part may be used in any number of different assemblies with different locations in a Bill of Material. Most of our assemblies use "one off" parts that are only used in that assembly so it may be possible in my particular situation to do this if there is a way to get at the BoM item number and connect it to the IPT file.
View 4 Replies
View Related
Apr 4, 2012
When we generate a gear pair using the design accelerator, the balloon from the drawing assembly only reflect one number instead of 2 different numbers. How can we change the number to reflect individual gears. Attached is the graphics.
View 1 Replies
View Related
Nov 27, 2012
is there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word programme has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed
View 6 Replies
View Related
Jun 21, 2012
I am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.
View 2 Replies
View Related
May 4, 2013
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
View 7 Replies
View Related
Jun 12, 2008
The structures I created in my part list aren't available when using the Network Layout Tool. I can select the custom pipes i created, however the structures aren't available in the Structure List pulldown. They show when editing the part list, but not on the layout toolbar.
View 7 Replies
View Related
Nov 17, 2011
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
View 2 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Sep 17, 2012
Is there any method to sort sketch blocks in a part file? All of our sketch blocks are numbered with a profile number. When we create a new multi-body assembly we will often derive 50-100 of them into the master file. It would be great if we could sort them by profile number.
The next best solution would be the ability to create sub-folders to place them in by type (sort of like assembly folders), but I'm pretty sure this isn't possible.
View 1 Replies
View Related
Oct 12, 2012
I have created a dynamic block with a rotation parameter&action on an object in the block. My problem is that when I pick the grip to rotate the object it only allows me to rotate it to where my cursor is pointing, if I enter an angle when prompted "Specify rotation angle or [Base point/Undo/eXit]:" say 45degrees the object does not rotate 45 degrees it just rotates to wherever my cursor is pointing
View 9 Replies
View Related
Nov 27, 2013
I have a block that when I extend it, a new 10' section is added. It will only add the 10' piece (array). What I am looking to do is find a way so that once I hit a total distance have it switch the part that it adds. So I have like a rail, I keep adding these 10' pieces and then once it hits 40' I want it to add the end piece which is different.
View 1 Replies
View Related
Jun 18, 2012
Is it possible to stretch block depending of the insertion point so that the bottom part is always on the same high.
See attached image.
View 8 Replies
View Related
May 10, 2012
Is there a way to do this? Is there a script out there that can create individual Symbols from individual layers?
EDIT: I pasted this in the wrong forum so i moved it over here.
View 16 Replies
View Related
Aug 11, 2013
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
View 1 Replies
View Related
May 14, 2013
I have a bit of code that I use to create hatches but the names are just coded inside (like "BRICK" or "CLAY"); I would like to list all available patterns for the curent drawing(on a form, using a combobox, etc), which is the best way to go?
View 2 Replies
View Related
Feb 27, 2013
I need a 1:50 annotation scale but it is not listed do I have to make this scale and add it?
View 2 Replies
View Related
May 25, 2012
How to I "unhide" my photo files in My Pictures?
View 5 Replies
View Related
Sep 29, 2011
I can not figure out why my annotation scale list has very few scale listings to choose form. The only scales that are listed are ratio (i.e. 1:1), i seem to be missing feet and inches (i.e. 1/4" = 1'). Is there a way to turn the rest of the scales on?
View 3 Replies
View Related
Jun 4, 2012
Under Sheet Set Properties, I have more than one Callout block listed.
But when I go to sheet views and right click a view, only the 1st callout block that I used is available under place callout block.
How do I chose a different callout block? 2013 Civil 3D
View 2 Replies
View Related