The structures I created in my part list aren't available when using the Network Layout Tool. I can select the custom pipes i created, however the structures aren't available in the Structure List pulldown. They show when editing the part list, but not on the layout toolbar.
View 7 RepliesI am trying to learn Part Builder to create a custom inlet structure. I am able to build the part in Part Builder so it looks like it should and seems to work correctly when I change part sizes. I run into trouble when I try to change the model parameter for Structure Height (SBSH) to a formula invovling Rim to Sump Height (SRS). When I do this and then go to Edit Size Parameters, I get an error " one or more calculations have failed". It does not seem to make any difference what formula I use for SBSH or what size parameter or model parameter SBSH was set to before I entered the formula.
I am able to save the part without any other error messages, however, when I look at the .xml file, SBSH is a constant and not the formula I entered. I can edit the .xml file to enter the formula that I want but still the part does not function properly in a drawing.
I can make a pipe network using the new structure, however, the pipe inverts are not the same as the sump elevation of the structure. They are usually several feet below the sump. I can get the structure sump to match the pipe inverts by going to "Connected Pipes" under "Edit Structure Properties", highlighting the pipe invert elevation and then clicking "Apply". If you change the pipe using "Edit pipe properties" after this, the structure invert does not update as it should.
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies View RelatedWe have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedI have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
I have what turns out to be the first parts list in three years where I need to sum the lengths of a couple items together to get a total length for that material in feet.
What do I need to do to get the two lines in the attached screenshot to sum their lengths together? I would be happy to add another column to the list for this, perhaps the "Unit Quantity" column where most everything is set to "Each" but the two lines shown are summed into a length in feet (or anything like that). How can I accomplish this?
I have an issue where I go to place a parts list and after placing does not show any items. I can go into the BOM and all the parts are shown. However, only columns and rows are displayed in the parts list.
View 2 Replies View RelatedHow do i move rows manually up/down in the part list without having to change the ballon/item number? I dont want to use the "sort by" command either because its either one way or the other and not manually like i want to.
View 2 Replies View RelatedI have common parts (custom frame member) that I use repeatedly in assemblies that I don't need to show in a parts list. Is there a way to control this so they don't show up in a parts list? Currently I go into the parts list and turn them off before exporting the list.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have some hardware in my parts list drawings that has a substitute for each other. So you can use one of either item in the list. Per the ASME guidelines, those two parts share the same item number in the parts list. So my question is there any way to tell those two parts they are substitute from each other and they come into the parts list sharing that same item number. Right now i'm manually changing that item number in the parts list. But if you try to re-order those parts it's a nightmare cause it's still treating that other item as a seperate entity.
View 1 Replies View RelatedHow can i select/highlight all items in a Multi_select list_box?
View 4 Replies View RelatedI have an assembly with a subassembly in it. The subassemblies bom structure is set on Normal so that the subassembly number shows on the main assembly BOM and not the individual parts.
However when I place the parts list on the .idw of the main menu it keeps on selecting the parts structure for the BOM, I need it to select the structured view. How do I get it to select the structured view on the BOM so that the BOM does not show the individual parts of the subassembly?
I have made sure that the parts view on the BOM in the source assembly is disabled.
I want to create a structure using the attached part geometry, what would be the best way to make the crosses coincident with the two long columns? (just like the 2 at the top but without having to manually trim each line, if it could be constrained to variable parameters even better)
The structure has the same geometry on all four sides so i intend to circular patern the frame generator components around the Z axis, any better workflows?
I am using a breakline to establish contours around the foundation of a building. I've done this in the past with no problems. Now I'm getting an Event Viewer, Error message saying that the breakline wasn't added to the surface because it crossed a point or crossed another breakline. In one case there wasn't another breakline in the drawing.
I've used 3d polylines & others to establish the breaklines.
I am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.
View 2 Replies View RelatedHere's my background, im in the power transformer business, started as a winder (making the coils) but ended up making the design and drawings of them. Basically coils are cylindrical and we only make a radial cut view of it. Going from the center of the core to the outer most coil. The part list would typically have roughly 80 items for a full phase assembly, we make a drawing of the full assembly, then first winding, second winding, third winding, etc. The way i work right now is with standard drawings giving A, B, C etc dimensions, and when i make the piece for the transformer, i have to input the dimension in the excel part list by hand.
The can i do these things questions..
1-Only way to have individual items listed in the part lists would be with blocks right? The equivalent of inventor i-parts? Each block would have to be named after the item?
2-Can i add mass to the items? this could get complicated since its cylindrical, but in 2d... so i guess some math formulas would have to go in for this, as a cylinder with a diameter of 500, thickness of 5, and height of 1000 for example, would just be represented in the drawing as a rectangle of 5x1000, the diameter is the core center to the cylinder*2 (radial drawing). So the mass would need to take into account that the rectangle goes all the way around an axis.
3-I've played with autocad 2010 parametrics. With the axis as a base, i can enter the diameter of the first cylinder, then the thickness and height of everything that follows, the clearance from bottom and top also and if i change 1 value, everything adjusts to it. BUT can i change the dimensions via an excel sheet? If not, how hard would it be (i know a small bit of visual basic from excel), to make a LISP or VBA menu inside cad where we could enter the dimensions and the whole assembly automatically adjusts?
4-I make a drawing of the full assembly, then demolish it to each individual coils. The equivalent of an inventor .iam, would be xref in autocad? So i can makea coil 1, coil 2, coil 3, interwinding wraps, and then make an xref that would combine all of these into the full assembly? And also i guess if its split into 4 to 5 different drawings, the possible BOM out of there would be much easier to manage.
Is there a way to list what items are constrained to levels? i need to remove a couple of annoying levels but have a feeling that walls, roofs, families, etc may be constrained to the levels that I need to delete.
I tried doing a multi-category schedule but I think I need to do one for doors, windows, etc. I thought I read somewhere that this feature was available in Revit 2012.
After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5? I run Adobe Production Premium CS6.
I have recently been using Sheet Set Managers (SSM) more recently and have found them quite handy but I am also finding some peculiarities with it too. I have no issues setting up a SSM and getting it to plot all my sheets either to our plotter or to PDF at full size (24x36), however when it comes to setting up a half size (11x17) page setup and overriding to it, is where problems occur.
What I want is a page setup that I can select that will plot 11x17 from 24x36. So, I first created a page setup that does this in our template (.dwt) and then set the page setup overrides file to our template file (under sheet set properties). Next I right-cliked on my sheet set and went to "Publish" and then "Publishing Using Page Setup Override", but the list it populated for me did not reflect all of the page setups we have in our template??? It listed two page steups _24x36 and _30x42 (see attachment). These page setups can be found in our template under page setup manager along with several others which don't show in the overrides (see attachment).
Is there a reason the other page setups aren't coming up in the SSM overrides menu?
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
Need vb.net code for filter part list base on view representation.
View 1 Replies View RelatedI need to use 2 part list in my drawings. I have made the second part list in the style editor and saved it but how do I select it?
View 1 Replies View Relatedim using inventor 2012.im trying to put a part list on my drawings.but for some reason, the part list is using a Gost Form. ( diffrent layout and polish/ russian text )How do I go back to default.I have allready tried to reinstall inventor, no go.
View 2 Replies View RelatedI've assembly with multiples sub-assemblies, when I put part list with "parts only", it shows all parts of sub-assemblies and when I put with "structured", it shows all sub-assemblies(structured).
Is there a possibility to show selected sub-assemblies in parts while remaining as structured in one part list?
code for exporting the thumbnail image to excel URL......will this work with Inventor 2014...i knew that there is a Bom tolls pro avaolable in Autodesk Exchange apps but it is apaid version.
View 5 Replies View RelatedIs it possible to get the assembly name in the title of a partlist.
And then I mean automatically. I know I can type it there :
Autodesk Product Design Suite Premium 2014
Windows 8.1
Spacepilot
I got this routine off the In The Trenches blog and am trying to change it, some. For some reason when I export I can only get 4 columns to export. So what the heck am I missing here? The Part List I am using has all the colums I am trying to export on it.
'-------------Start Of ilogic ------------------------------------------------
'get the path and name of the drawing file
path_and_name=ThisDoc.PathAndFileName(False)' without extension
'define oDoc
oDoc=ThisDoc.Document
[Code] ....
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
Why cells appear in yellow in my part list ? (see attach file)
View 4 Replies View RelatedI have little problem for synchronize balloon with part list where some times I put single component to main assy for create detail drawing. The problem is balloon from single component must change manually for synchrone with Part List. If number changed in part list sometimes I forgot for change balloon. So it's become miss match between balloon and part list. How to make this become synchron.
Please see attached file.