Is there a way to list what items are constrained to levels? i need to remove a couple of annoying levels but have a feeling that walls, roofs, families, etc may be constrained to the levels that I need to delete.
I tried doing a multi-category schedule but I think I need to do one for doors, windows, etc. I thought I read somewhere that this feature was available in Revit 2012.
I'm trying to create a parts list that will show item numbers for the sub assemblies and the individual parts for each sub assembly. When I'm creating the parts list in the drawing, the option for "All Levels"is greyed out once I select my source assembly. How I can show this in a Parts list?
View 9 Replies View RelatedI've assembly with multiples sub-assemblies, when I put part list with "parts only", it shows all parts of sub-assemblies and when I put with "structured", it shows all sub-assemblies(structured).
Is there a possibility to show selected sub-assemblies in parts while remaining as structured in one part list?
I have an assembly consisting of 4 sub-assemblies. Item 4 is a mount plate c/w M16 fasteners.I would like the fasteners to display as sub-parts under item 4 (24520020s) as 4.1, 4.2, etc because they are also purchasable separately.
I do not want to display the mount plate (03241389s) because it's not purchasable separately.
When I expand item 4 in the parts list it automatically turns visibility off for item 4 (24520020s), and only shows the children (0231....s).I would like to display item 4 & the fasteners only. Quite simple to turn off visibility of 03241389s, but cannot get the parent and child parts to display at the same time.
I have what turns out to be the first parts list in three years where I need to sum the lengths of a couple items together to get a total length for that material in feet.
What do I need to do to get the two lines in the attached screenshot to sum their lengths together? I would be happy to add another column to the list for this, perhaps the "Unit Quantity" column where most everything is set to "Each" but the two lines shown are summed into a length in feet (or anything like that). How can I accomplish this?
After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5? I run Adobe Production Premium CS6.
I have an issue where I go to place a parts list and after placing does not show any items. I can go into the BOM and all the parts are shown. However, only columns and rows are displayed in the parts list.
View 2 Replies View RelatedHow do i move rows manually up/down in the part list without having to change the ballon/item number? I dont want to use the "sort by" command either because its either one way or the other and not manually like i want to.
View 2 Replies View RelatedThe structures I created in my part list aren't available when using the Network Layout Tool. I can select the custom pipes i created, however the structures aren't available in the Structure List pulldown. They show when editing the part list, but not on the layout toolbar.
View 7 Replies View RelatedI have common parts (custom frame member) that I use repeatedly in assemblies that I don't need to show in a parts list. Is there a way to control this so they don't show up in a parts list? Currently I go into the parts list and turn them off before exporting the list.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I am working with revit since 08, and there was this little annoying bug - in the middle of working process some levels become super slow - adding walls becomes a big task. At the beginning everything works great, but (I suspect) at some point I add curtain inside the room, something goes wrong and the level becomes slow.
It does not work even if I remove curtain walls or purge unused or duplicate window or make separate plan view - if floor area with several basic walls is visible level becomes slow.
I have some hardware in my parts list drawings that has a substitute for each other. So you can use one of either item in the list. Per the ASME guidelines, those two parts share the same item number in the parts list. So my question is there any way to tell those two parts they are substitute from each other and they come into the parts list sharing that same item number. Right now i'm manually changing that item number in the parts list. But if you try to re-order those parts it's a nightmare cause it's still treating that other item as a seperate entity.
View 1 Replies View RelatedHow can i select/highlight all items in a Multi_select list_box?
View 4 Replies View RelatedI closed the 'levels' dialog box on the left hand side of the screen (underneath the 'properties' dock and for the life of me cannot figure out how to get it back.
View 3 Replies View RelatedI have inherited some Revit files, all of which have a ground floor and ceiling plan (hence an associated level).
The levels do not show the in elevations (or sections for that matter). It is not a view setting, I have checked this, nor are they hidden by category or element. I have added new levels and these are visible. The levels exist, I just cannot view them or select them.
Do I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies View RelatedIs there any way of adjusting the text on a level?
View 2 Replies View RelatedI have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
View 2 Replies View RelatedI need to swap my level 1 and level 2 of my building's floorplans. What is the most efficient way to take the walls etc. from level two and place them on level 1, and take whats on level 1 and place them on level 2? I am swapping the floorplans.
View 2 Replies View Relatedhow to create a wall that infills the gable between two levels of the same roof. There is no internal wall below this location - so this would be some sort of lightweight studwork and panelling rather than brick.
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
“Aligned to selected levels” is not active,
I’m wondering why the option “aligned to selected levels” is not active as I copy and paste from one level to another.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I can't figure out how to get my levels to show fractions of inches. I can add a dimension from level to level and see the fraction, but the level itself insists on rounding to nearest inch. View scale makes no difference.
View 2 Replies View RelatedWe are developing a multistory housing project that will have 5 unique unit plans. What I would like to know is the best approach to implimenting the unit plans in revit?
In autocad, we would create an xref of the unit, then xref as needed on base plans. Thus the ability to place multiple xrefs of the unit on various levels while maintatining the ability to make one change to the original unit plan and have it update thru out the project....How would we do this in Revit?
How to I change the Comma to a Period in Levels or Dimensions?
View 2 Replies View RelatedIn starting a new project, I renamed "Level 1" to "Street Level" and "Level 2" to "Level 1". Next I added two additional levels in the drawing, "Level 2" and "Level 3".
My Project Browser shows only Level 1, Site, and Street. Why do the Levels 2 and 3 not show under and how can I get them to.
Having some very strange issues with area boundaries used in groups.
I have tested it in RAC 2011, 2012 and 2013 and they all seem to be doing similar things.
grouping them and pasting them is fine - even between levels and even schemes. when i edit them items are excluded on sketch close and even disappear from one scheme to only appear in the scheme that i edited them in. the area still remains in both but only boundaries in one scheme.
How to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
We are looking for a way to document the free height, between two floor slab on two different levels, on our floorplans. We would like to use some sort of tag. And not just text.
View 9 Replies View RelatedI started a new project. I linked a revit file. I copy monitored key levels from the linked file. The color of the level heads is black and this indicates that there are no associated plan views. My question is, what is the best way to create plan views from the copy monitored levels?
View 1 Replies View RelatedThere is a way of controlling how much some objetcs extend outside the scope box? The levels, sections and grids extend too much to my taste and the space avaliable in my sheet.
View 1 Replies View Relatedwhy have the levels not showing up on all of the elevations even when I adjust the drawing viewport??
View 1 Replies View Related