I have a scanner issue and wanted to load a psd to show the problem (600 almost looks better than 1200) but when I upload, it gets rejected. It's ~21 M.
Another issue re: scanners. Mine only has jpeg, bitmap, png and a few other file types. These are actual photographs and I'd like to scan them in RAW.
I have been using Xara for a very long time. I have recently started a side business generating signs and banners and continue to use Xara as my primary graphics editor, but I've discovered a tiny issue and I'm hoping there is some way around it. The Font Size live preview slider is limited (for some reason?) to sizes less than 32pt, and the font drop down list starts getting coarse after 24pt and tops out at 72pt sizes. Since most of what I'm doing involves text sizes larger than 72pt and much larger than the 32pt the slider allows, both of those options for adjusting font size have lost their usefulness.
Is there any way for me to adjust the values for the slider and/or for the drop down list to allow larger numbers? I realize I could use a scaling factor and layout my signs as a fraction of their intended size, but then I have hope to remember to change the scale when I import it into my sign cutting software or run the risk of wasting vinyl, so that would be my last choice.
Surely I can't be the only person who uses large text?
Also, any issues with exporting text into EPS and getting a change in the case of the text? If I export "This is Text" as an EPS file, when I import it into my sign cutting software, I sometimes get "tHIS IS tEXT", but if I import the same EPS into Xara it looks normal. Not sure if that is Xara or the sign cutting software (LXi Express Expert edition)... Until I figure that one out, I make sure to convert text to editable shapes before exporting it...
how should I size a photograph to attach it in sensible proportions to an e-mail when using Elements 11? In Elements 9 I set the dpi at 72 and then the longest length at 1024mm. he shortest length was set automatically by the programme. Elements 11 doesn't allow me to do this. I've tried starting off with 72 dpi but as soon as I enter the longest length the dpi changes. This did not happen with E9 and in E9 the size of the attachment was measured in KB's but with E11 I finish up with quite large MB sizes.
View 2 Replies View RelatedSize of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View Relatedwhere do I find layer dimensions for each layer in CS6? e.g. I might have the image of a table superimposed on the background, but just want the pixcel-based dimensions of the table?
View 3 Replies View Relatedhow do i find kodak galler in photoshop elements 10 - in the create programme only shows flat print card sizes and none for folded card
View 1 Replies View RelatedMy photo files show in Windows Explorer as "400x400" but load onto photoshop project layers at wildly different pixel dimensions: 80x80 to 675x675; why don't they load at 400x400? (Win 7 64; CS6E)
View 5 Replies View RelatedI'm in a Photoshop document, and I'm working with two different text areas. Both area registering as 14px in size in the Type menu, and yet, they're radically different in size. One is tiny, whilst the other is at least twice, maybe thrice the size. Why is this happening?
I've checked there's no overlapping text areas and things like that, everything should be fairly normal, it just isn't.
I'm using Adobe Photoshop CS6 v13.1.2 x64 for Mac, running on a Macbook Pro Retina 1.83ghz and 8GB ram.
This problem of the font size being incorrect in the Character Palette is driving me nuts.
(Type Layer shows one size. Selected type shows another size. Single placed cursor shows another size...)
Is there a solution?
Seems like a major bug?
Is there a way to have VARIABLE text size AND BLOCK SIZE autocad 2012, for different scales sizes? To sum it up I am running 1/8th scale on some of the pages in the set with a 1/4 blow up section. I use addressable devices so it is a lot of work to change all the text Is there anything that will auto-update the text size per scale with out having to go through my drawing and repeat all the text and VPfreeze it?
View 9 Replies View Relatedthis function is not functioning anymore. I may have done something to cause this but I don't recall.
Entering sizes in the text boxes does not change the object size anymore.
The only option right now is use the transform size docker...would rather not have to do that.
Also, would not like to hit F8...
Draw X5 sp2 (15.2.0.661)
I hate pressing F8 at startup!
Title says it all. How to find the size of a selection in pixels in CC
View 9 Replies View RelatedWhen looking for a font to use, a SAMPLE of font displays along side of the fonts list but in CS6 i can not find the Size option for the SAMPLE list, in other versions it use to be in preferences , is it a lost cause searching for it (no longer available in CS6).the sample is so small it's hard to see
View 7 Replies View RelatedLet's say, for example, that i create an object with a size, then i create other objects with other sizes.
When I try to see the size of the first object created it says that has the same size like the other objects which have other sizes (it's even obvius cause they r bigger on my screen:D).With all the other versions of Corel i didn't had those problems, but X5 does that.
I have a font on my system (Geometr231 BT if it matters). It's a TrueType font. It shows up in all of my other programs on their font lists, but NOT IN PHOTOSHOP 5.5.
Many TTFonts are unfortunately country-coded incorrectly due to a bug in a font creation application that quite a few foundries were using.
The fonts are listed alphabetically by country code, starting with
Western European.
If you open your adobefnt.lst file in a text editor, you will probably
find those fonts that are giving you problems have one of the
following entries:
WritingScript:Greek
WritingScript:Cyrillic
WritingScript:EastEuropeanRoman
when they should have
WritingScript:Roman
Changing the entry to WritingScript:Roman *may* help - but I would
make a copy of the file first....
If you do change the entries in the Adobefnt.lst, you will need to set it to read only to keep those settings. It will then not reflect any changes you make to your installed fonts.
When I moved from XP to Vista, it seems I've lost many fonts. I have installing them directly into the Common folder with no success.I have less than 500 fonts.
View 9 Replies View RelatedThis is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
View 4 Replies View RelatedSpent 9 hrs creating a slideshow that I saved. Closed PSE 11 and reopened and can no longer find the slideshow. When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large". Is this my slideshow and if so how can I recover it?
View 1 Replies View RelatedI get an error code U41M1C212 when trying to upgrade in PS Elements 11.I am running MS Windows 8.This doesn't seem to apply as I do not see any of those MS virtual adapters listed. URL....I also disabled firewalls and got the same error message.
View 5 Replies View RelatedI'm a new user to PE. How do I export photos for printing by others than that listed in PE? I don't want to use Photoworld - limited print size options, etc.
View 5 Replies View Relatedwhile looking through certain tutorials on the new crop system i came across many that referenced the above mentioned size and resolution option in the access ratio drop down menu. They all mention a dialog box which then appears which looks really useful, however my version doesn't have this option.
View 10 Replies View RelatedUsing Inventors VBA, is it possible to get the sheet size of a idw drawing file (E.g. A0, A1, A2 etc)
View 1 Replies View RelatedEdit: Fastener size. Can't find a way to change that.
Our teacher left us with a problem and I can't really understand this. I'm reading through the book and there's basically little to no "how to do" or examples I can follow. We have to do a 2D drawing. It's a Flathead cap screw - 3/8 - 16 UNC 2A x 2.0 lg 1.0 grip
So far I know that 3/8(.375") is the major diameter, 16 is the threads per inch, 2A is the average with external thread, and 2.0 is the length. I pretty much don't know how to put it into a drawing..
Wow, I am trying to ask about the lack of fonts in Gimp 2.8.4, when I cannot find a font list or size list here on this document!
Edit/ Preferences states that the fonts are to be found in the following directories:
C:UsersHubert.gimp-2.8fonts
C:Program FilesGIMP 2sharegimp2.0fonts (note the '2.0')
The first one is empty, and the second one does not exist.
This problem has been mentioned on the internet, but no answer has yet been stated.
I don't know how to populate those spaces with fonts that can be used by Gimp.
DO YOU?
How do I find out the exact size of a graphic or image after it has a clipping mask applied in Illustrator CS4? When you just select the image or do Ctrl+A it shows the entire image size(including the masked unwanted portion) in the transform palette and I just need the final dimensions of the image. How I can find out what the masked image size is?
View 1 Replies View RelatedWhy can�t I upload attachements (204 kb)?
View 3 Replies View RelatedMade a slide show with music, tried to e-mail to family and friends but the attactment is 15mb. Is that to large? Sending in adobe reader format pdf.
View 2 Replies View RelatedI got a photo in an email attachment that I want to crop and save in my Photoshop Elements 10. How can I do this? When I click on the attachment (The Writer.pdf - Adobe Reader) it appears in an Adobe window with these options: Export DDF, Create PDF, Send Files, and Store Files. I tried a few things but nothing works.
View 10 Replies View Relatedwhere I could find models for Bar Size Channels. I can't find any in Content center, CBliss, or MFG Community member files.
View 2 Replies View RelatedIs there any better method to find the overall size of a part model? I tried Range Box method and that gives some inaccuracy if the model have loft feature and fillet on that. But if I use GetExistingFacets the size gives more accurate. At the same time in a round part model with a cut, the GetExistingFacets give inaccuracy and range box method gives better result. Below is the X, Y, Z sizes of the two models with the above mentioned methods.
Round Part (Part1)
Measured with GetExistingFacets method = 129.934196472168 x 126.422719955444 x 25
Measured with Range Box method = 130 x 126.514225996919 x 25
Rectangular Part (Part2)
Measured with GetExistingFacets method = 300 x 300 x 30.0000286102295
Measured with Range Box method = 300 x 300 x 30.4094903224854
find attached part models which I used.
HAve Elements 11 and can't get email attachment to work. Only choice for mail is adobe. Get no response when ask to resend email verification. Now what? Using vista
View 2 Replies View Related